GitLab

When get.py is run in a script the percent-update printouts shown while
downloading the toolchain end up as 100s to 1000s of lines in log files.

When stdout is not a terminal, avoid printing these percentages and
shrink logfiles significantly.  Errors/etc. are still reported as normal.

Checking here really does not work when called from within `onRequest`

* Added partition table guide

* Using a custom partition file

* Added some more examples for partitions

* Fixed the app partition offset

* Added bare_minimum_2MB partition table file

* PR review changes

- add tinyuf2 suffix to variant bootloader, cvs
- also update adafruit esp32s3 menu to match latest esp32s3dev one

Description of Change

This PR adds support for Espoir, a mikroBUS PoE+ devboard, by Connaxio inc. However, the ESP32-MINI-1 is a single core CPU, so Connaxio will provide the builds for its devboard until single core CPUs are officially supported. Adding these modifications to the official repository will limit discrepancies between Connaxio's fork and the main repo.

Tests scenarios

Tests include Ethernet, SPI, USB, I2C, UART (1-wire).

More info: https://www.connaxio.com/electronics/espoir/

espressif/esp-idf / components/driver/include/driver/uart.h defines the API:
esp_err_t uart_set_pin(uart_port_t uart_num, int tx_io_num, int rx_io_num, int **rts_io_num**, int **cts_io_num**);
uartSetPins uses that api but alls it with swapped CTS/RTS pins as its API uses a different pin ordering: 
uart_set_pin(uart->num, txPin, rxPin, **ctsPin**, **rtsPin**); 

This fixes the wrong order in the function uartSetPins

When building the core with `-Wextra` a few locations have `case:`
fall throughs or skipped field initializers.

Add proper comments for B64 cases to avoid GCC warnings

Initialized unused fields in Tone and WiFiGeneric to avoid missing
field initializer warnings.

````
2022-05-19T17:40:42.2280300Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c: In function 'base64_decode_block_signed':
2022-05-19T17:40:42.2282122Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:42:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2283247Z          *plainchar    = (fragment & 0x03f) << 2;
2022-05-19T17:40:42.2284240Z          ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2285087Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:43:7: note: here
2022-05-19T17:40:42.2285435Z        case step_b:
2022-05-19T17:40:42.2285691Z        ^~~~
2022-05-19T17:40:42.2286515Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:53:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2286932Z          *plainchar    = (fragment & 0x00f) << 4;
2022-05-19T17:40:42.2287219Z          ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2287609Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:54:7: note: here
2022-05-19T17:40:42.2287909Z        case step_c:
2022-05-19T17:40:42.2288200Z        ^~~~
2022-05-19T17:40:42.2288972Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:64:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2289491Z          *plainchar    = (fragment & 0x003) << 6;
2022-05-19T17:40:42.2289745Z          ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2290162Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cdecode.c:65:7: note: here
2022-05-19T17:40:42.2290509Z        case step_d:
2022-05-19T17:40:42.2290714Z        ^~~~
2022-05-19T17:40:42.2482744Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c: In function 'base64_encode_block':
2022-05-19T17:40:42.2484713Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:46:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2485415Z              result = (fragment & 0x003) << 4;
2022-05-19T17:40:42.2486713Z              ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2487696Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:47:9: note: here
2022-05-19T17:40:42.2488519Z          case step_B:
2022-05-19T17:40:42.2489175Z          ^~~~
2022-05-19T17:40:42.2492458Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:56:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
2022-05-19T17:40:42.2493351Z              result = (fragment & 0x00f) << 2;
2022-05-19T17:40:42.2494227Z              ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2022-05-19T17:40:42.2496324Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/libb64/cencode.c:57:9: note: here
2022-05-19T17:40:42.2496937Z          case step_C:
2022-05-19T17:40:42.2497261Z          ^~~~
2022-05-19T17:40:44.6354962Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void setToneChannel(uint8_t)':
2022-05-19T17:40:44.6356417Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::pin' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6357120Z      };
2022-05-19T17:40:44.6358732Z      ^
2022-05-19T17:40:44.6364470Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::frequency' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6367914Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:99:5: warning: missing initializer for member 'tone_msg_t::duration' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6372875Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void noTone(uint8_t)':
2022-05-19T17:40:44.6373943Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::frequency' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6375154Z      };
2022-05-19T17:40:44.6375825Z      ^
2022-05-19T17:40:44.6379852Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::duration' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6383291Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:110:5: warning: missing initializer for member 'tone_msg_t::channel' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6388688Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp: In function 'void tone(uint8_t, unsigned int, long unsigned int)':
2022-05-19T17:40:44.6389829Z /home/runner/arduino_ide/hardware/espressif/esp32/cores/esp32/Tone.cpp:128:5: warning: missing initializer for member 'tone_msg_t::channel' [-Wmissing-field-initializers]
2022-05-19T17:40:44.6390677Z      };
2022-05-19T17:40:44.6391420Z      ^
2022-05-19T17:42:00.6768353Z /home/runner/arduino_ide/hardware/espressif/esp32/libraries/WiFi/src/WiFiGeneric.cpp: In static member function 'static bool WiFiGenericClass::setDualAntennaConfig(uint8_t, uint8_t, wifi_rx_ant_t, wifi_tx_ant_t)':
2022-05-19T17:42:00.6769293Z /home/runner/arduino_ide/hardware/espressif/esp32/libraries/WiFi/src/WiFiGeneric.cpp:1333:5: warning: missing initializer for member 'wifi_ant_config_t::rx_ant_default' [-Wmissing-field-initializers]
2022-05-19T17:42:00.6769658Z      };
2022-05-19T17:42:00.6769824Z      ^
````

add a comment to make it clear, since platformIO still creating the `spiffs.bin` for filesystem image. The file name `spiffs.bin` is so much CONFUSING! it makes the user fill the LittleFS creating is fail.

The asterisk needs to be quoted.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>

* Fix timerAttachInterrupt() and timerDetachInterrupt() for migration to IDF 4.4

* Fixing log messages as per request

Better allocate the buffer for f_mkfs from the heap otherwise the stack requirement of this library is huge due to a work buffer allocated for f_mkfs in sdcard_mount. The work buffer is only needed if argument format_if_empty is set true (which is by default false). 
This change is quite important if you plan to use this library in a task. as now it increased the tasks stacks size by 4k, even this memory is never used if users are not aware of the large stack requirement during init this library may have other variables on stack that would have written memory outsides its range which can cause various side effects.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

The internal _isRemoteAddressSet variable is set to true
when calling connect() functions. If connecting fails _isRemoteAddressSet
needs to be re-set to false, otherwise other functions, such as
discover() will fail without clear error messages.

... as availability depends on compilation parameters.

Fixed channel / unit selection for ESP32C3 (has only 5 channels on 1 adc unit).

Removed unnecessary includes.

Fixed different attenuation on channels to be taken in care in __analogReadMilliVolt.

All chips in __analogReadMilliVolts now use adc characteristics + calculation from raw to voltage as ESP32 does.

Fixes inability to flash the bootloader with esptool 4.x on device with flash size different than the default

Fixes: https://github.com/espressif/arduino-esp32/issues/5871

* Added HW timer unit test

* Adde setUp and tearDown functions

* Adds DHCP Range Setup to APMode

* ready for supporting any netmask in DHCP server

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>

* Adjustable Serial Event Task Stack Size And Priority

* Added options to Kconfig

* Added Core Affinity

* Added CONFIG_FREERTOS_UNICORE

* Removed _CONFIG from FREERTOS_UNICORE

* Fixing Core choice for OnReceive() 

Makes it alligned to changes in #6718
Also eliminates conflict with #6718 for merging
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* Update Kconfig to autoselect the proper cunning core

* Always run UDP on Core0 by default

* Add new board XIAO_WIFI

Fixes corrupt log entry printed by SoftAP DHCPServer.  Converts String() to expected cstr format.

NINA-W106-00B : 32Mb / 4MB
NINA-W106-10B : 16Mb / 8MB

older NINA-W101/W102 : had 16Mb / 2MB only

* Adds Arduino standard functions

* Fixes round()

Adds Arduino basic math Macros with '_' prefix.

* fix(hal.cpu) compiler warn about printf-format for pointers >

warning was:
```
framework-arduinoespressif32/cores/esp32/esp32-hal-cpu.c:132:9: note: in expansion of macro 'log_e'
         log_e("not found func=%08X arg=%08X",cb,arg);
         ^~~~~
framework-arduinoespressif32/tools/sdk/esp32/include/log/include/esp_log.h:276:27: warning: format '%X' expects argument of type 'unsigned int', but argument 7 has type 'void *' [-Wformat=]

```

* fix(tone.cpp) compiler warn about printf-format for pointers >

format-str expected plain uint while `duration` is long-uint.

Warning was:
```
.../cores/esp32/esp32-hal-log.h:115:32: note: in expansion of macro 'ESP_LOG_LEVEL_LOCAL'
 #define log_d(format, ...) do {ESP_LOG_LEVEL_LOCAL(ESP_LOG_DEBUG, TAG, format, ##__VA_ARGS__);}while(0)
                                ^~~~~~~~~~~~~~~~~~~
.../cores/esp32/Tone.cpp:31:9: note: in expansion of macro 'log_d'
         log_d("Task received from queue TONE_START: _pin=%d, frequency=%u Hz, duration=%u ms", tone_msg.pin, tone_msg.frequency, tone_msg.duration);
         ^~~~~
.../tools/sdk/esp32/include/log/include/esp_log.h:276:27: warning: format '%u' expects argument of type 'unsigned int', but argument 8 has type 'long unsigned int' [-Wformat=]
```

Summary

Added compiler.warning_flags to all chips in platform.txt to reflect users setting of warning level output during compilation (set up in Arduino IDE preferences)

Impact

When a warning is set to none the compilation will no longer display warnings

Related links

Solves issue #6118

* Changed in pinMode() default  intr_type

pins default configuration has intr_type =  GPIO_INTR_DISABLE
With this implementation, it will set the intr_type to previously set intr_type. It will no longer disable interrupt, when pinmode is called multiple times on same pin with interrupt enabled.

Workflow is scheduled.

It looks like the depedency on the Test job was not enough and the Event
job was triggering even without the label.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>