GitLab

So that there is a one-to-one correspondence between js_ref and
JsProxy objects.
Signed-off-by: Damien George <damien@micropython.org>

Instead of raising KeyError.  These semantics match JavaScript behaviour
and make it much more seamless to pass Python dicts through to JavaScript
as though they were JavaScript {} objects.
Signed-off-by: Damien George <damien@micropython.org>

This adds a new undefined singleton to Python, that corresponds directly to
JavaScript `undefined`.  It's accessible via `js.undefined`.
Signed-off-by: Damien George <damien@micropython.org>

This reverts part of commit fa23e4b0, to
make it so that Python `None` converts to JavaScript `null` (and JavaScript
`null` already converts to Python `None`).  That's consistent with how the
`json` module converts these values back and forth.
Signed-off-by: Damien George <damien@micropython.org>

When a fatal error occurs it's important to know which precise version it
occurred on in order to be able to decode the crash dump information such
as the backtrace.

By wrapping around the built-in IDF panic handler we can print some extra
information whenever a fatal error occurs.  The message links to a new wiki
page which contains additional information on how to debug ESP32 issues,
and links to the bug reporting issue template.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>

Fixes automatic baudrate calculation results.

Default clock source on this SoC is HSE not PCLK1.  We could fix this by
switching to PCLK1 instead, but two extra complications:

- PCLK1 on this board is a 42.5MHz and the Pyboard CAN sample_point
  calculation requires an exact match, which is harder to hit with this
  source frequency.

- Would be a breaking change for any existing Python code on this board,
  i.e. specifying brp, bs1, bs2 to initialise CAN.

In the future it might be worth looking switching to the PLL source on this
SoC instead, as this is a much higher frequency that would give higher
quality BRS bitrate matches (probably too high without using the second
divider going into the CAN peripheral though, so more code changes needed
also).

This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>

If someone starts from this directory then they won't know they exist,
otherwise.
Signed-off-by: Angus Gratton <angus@redyak.com.au>

ThreadSafeFlag works on the unix port since commit
df08c38c.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Olivier Lenoir <olivier.len02@gmail.com>

Changes are:
- main.py: Add gitlab:org/repo, gitlab:org/repo@branch.
- mip.py: Implement install from GitLab.
- README.md: Add mip install gitlab:org/repo@branch example.
Signed-off-by: Olivier Lenoir <olivier.len02@gmail.com>

Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

And change Py None conversion so it converts to JS undefined.

The semantics for conversion of these objects are then:
- Python None           -> JavaScript undefined
- JavaScript undefined  -> Python None
- JavaScript null       -> Python None

This follows Pyodide:
https://pyodide.org/en/stable/usage/type-conversions.htmlSigned-off-by: Damien George <damien@micropython.org>

This commit defines a new `JsException` exception type which is used on the
Python side to wrap JavaScript errors.  That's then used when a JavaScript
Promise is rejected, and the reason is then converted to a `JsException`
for the Python side to handle.

This new exception is exposed as `jsffi.JsException`.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

Non-blocking SSL streams can be difficult to get right, so provide a
working example, of a HTTPS client.
Signed-off-by: Damien George <damien@micropython.org>

It's better for discoverability to have these examples named `https_xxx.py`
rather than `http_xxx_ssl.py`.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

Also fix a small typo.
Signed-off-by: Angus Gratton <angus@redyak.com.au>

Only when dynamic USB devices are enabled.

The issue here is that when the USB reset triggers, the dynamic USB device
reset callback is called from inside the TinyUSB task.

If that callback tries to print something then it'll call through to
tud_cdc_write_flush(), but TinyUSB hasn't finished updating state yet to
know it's no longer configured. Subsequently it may try to queue a transfer
and then the low-level DCD layer panics.

By explicitly stalling the endpoint first, usbd_edpt_claim() will fail and
tud_cdc_write_flush() returns immediately.

This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>

The W5100 and W5100S only have 4 available sockets and 16kB of socket
buffer.  Allocating 16kB to either the receive or transmit buffer of a
single socket is not allowed, so the current setup does not change the
allocation for socket 0 from the reset default.  ctlwizchip is returning -1
to indicate the error, but the response isn't being inspected and probably
doesn't need to be.
Signed-off-by: Jared Hancock <jared@greezybacon.me>

For ESP32C3/S2/S3 IDFv5 exposes new internal temperature API which is
different to the base ESP32, IDFv4.

Thanks to @robert-hh for cleaner code and testing sensor capability in
these devices.

See discussion #10443.
Signed-off-by: Rick Sorensen <rick.sorensen@gmail.com>

Signed-off-by: Rick Sorensen <rick.sorensen@gmail.com>

JavaScript semantics are such that the caller of an async function does not
need to await that function for it to run to completion.  This commit makes
that behaviour also apply to top-level async Python code run via
`runPythonAsync()`.
Signed-off-by: Damien George <damien@micropython.org>

This allows using JavaScript for..of on Python iterables.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

To improve efficiency.
Signed-off-by: Damien George <damien@micropython.org>

The `reason` in a rejected promise should be an instance of `Error`.  That
leads to better error messages on the JavaScript side.
Signed-off-by: Damien George <damien@micropython.org>

Fixes issue #14363.
Signed-off-by: Damien George <damien@micropython.org>

This was broken by 5aec051f when adding
support for I2C4 on H7 MCUs.
Signed-off-by: Damien George <damien@micropython.org>

Different MCUs have different requirements for the minimum number of bytes
that can be written to internal flash.
Signed-off-by: Damien George <damien@micropython.org>

The calculations `num_word32 / 4` and `num_word32 / 8` were rounding down
the number of words to program to flash, and therefore possibly truncating
the data (eg mboot could miss writing the final few words of the firmware).

That's fixed in this commit by adding extra logic to program any remaining
words.  And the logic for H5 and H7 is combined.
Signed-off-by: Damien George <damien@micropython.org>

Following change in 899592acSigned-off-by: Damien George <damien@micropython.org>

In case there is a power failure after during this operation, the key must
be the last thing that is written, to indicate valid data.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Matt Trentini <matt.trentini@gmail.com>

Signed-off-by: Damien George <damien@micropython.org>

Although the original motivation given for the workaround[1] is correct,
nlr.o and nlrthumb.o are linked with a small enough distance that the
problem does not occur, and the workaround isn't necessary. The distance
between the b instruction and its target (nlr_push_tail) is just 64
bytes[2], well within the ±2046 byte range addressable by an
unconditional branch instruction in Thumb mode.

The workaround induces a relocation in the text section (textrel), which
isn't supported everywhere, notably not on musl-libc[3], where it causes
a crash on start-up. With the workaround removed, micropython works on an
ARMv5T Linux system built with musl-libc.

This commit changes nlrthumb.c to use a direct jump by default, but
leaves the long jump workaround as an option for those cases where it's
actually needed.

[1]: commit dd376a23

Author: Damien George <damien.p.george@gmail.com>
Date:   Fri Sep 1 15:25:29 2017 +1000

    py/nlrthumb: Get working again on standard Thumb arch (ie not Thumb2).

    "b" on Thumb might not be long enough for the jump to nlr_push_tail so
    it must be done indirectly.

[2]: Excerpt from objdump -d micropython:

000095c4 <nlr_push_tail>:
    95c4:       b510            push    {r4, lr}
    95c6:       0004            movs    r4, r0
    95c8:       f02d fd42       bl      37050 <mp_thread_get_state>
    95cc:       6943            ldr     r3, [r0, #20]
    95ce:       6023            str     r3, [r4, #0]
    95d0:       6144            str     r4, [r0, #20]
    95d2:       2000            movs    r0, #0
    95d4:       bd10            pop     {r4, pc}

000095d6 <nlr_pop>:
    95d6:       b510            push    {r4, lr}
    95d8:       f02d fd3a       bl      37050 <mp_thread_get_state>
    95dc:       6943            ldr     r3, [r0, #20]
    95de:       681b            ldr     r3, [r3, #0]
    95e0:       6143            str     r3, [r0, #20]
    95e2:       bd10            pop     {r4, pc}

000095e4 <nlr_push>:
    95e4:       60c4            str     r4, [r0, #12]
    95e6:       6105            str     r5, [r0, #16]
    95e8:       6146            str     r6, [r0, #20]
    95ea:       6187            str     r7, [r0, #24]
    95ec:       4641            mov     r1, r8
    95ee:       61c1            str     r1, [r0, #28]
    95f0:       4649            mov     r1, r9
    95f2:       6201            str     r1, [r0, #32]
    95f4:       4651            mov     r1, sl
    95f6:       6241            str     r1, [r0, #36]   @ 0x24
    95f8:       4659            mov     r1, fp
    95fa:       6281            str     r1, [r0, #40]   @ 0x28
    95fc:       4669            mov     r1, sp
    95fe:       62c1            str     r1, [r0, #44]   @ 0x2c
    9600:       4671            mov     r1, lr
    9602:       6081            str     r1, [r0, #8]
    9604:       e7de            b.n     95c4 <nlr_push_tail>

[3]: https://www.openwall.com/lists/musl/2020/09/25/4Signed-off-by: J. Neuschäfer <j.ne@posteo.net>

This allows a simple way to run the existing asyncio tests under the
webassembly port, which doesn't support `asyncio.run()`.
Signed-off-by: Damien George <damien@micropython.org>