Add J-Link and ST-Link programmer menu items

boards.txt

@@ -45,8 +45,6 @@ nRF52DK.build.ldscript=nrf52_xxaa.ld
 BluzDK.name=Bluz DK
 
 BluzDK.upload.tool=nRF5:openocd
-BluzDK.upload.protocol=
-BluzDK.upload.interface=jlink
 BluzDK.upload.target=nrf51
 BluzDK.upload.address=0x0
 BluzDK.upload.maximum_size=262144

platform.txt

@@ -100,4 +100,8 @@ tools.openocd.cmd.windows=bin/openocd.exe
 
 tools.openocd.upload.params.verbose=-d2
 tools.openocd.upload.params.quiet=-d0
-tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -f interface/{upload.interface}.cfg -c "{upload.setup_command}" -f target/{upload.target}.cfg -c "program {{{build.path}/{build.project_name}.bin}} verify reset {upload.address}; shutdown; "
+tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -f interface/{upload.interface}.cfg -c "{upload.setup_command}" -f target/{upload.target}.cfg -c "program {{{build.path}/{build.project_name}.bin}} verify reset {upload.address}; shutdown;"
+
+tools.openocd.program.params.verbose=-d2
+tools.openocd.program.params.quiet=-d0
+tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -f interface/{program.interface}.cfg -c "{program.setup_command}" -f target/{program.target}.cfg -c "program {{{build.path}/{build.project_name}.bin}} verify reset {upload.address}; shutdown;"

programmers.txt

+jlink.name=J-Link
+jlink.communication=USB
+jlink.protocol=
+jlink.program.protocol=
+jlink.program.tool=openocd
+jlink.program.interface=jlink
+jlink.program.target=nrf51
+jlink.program.setup_command=transport select swd; set WORKAREASIZE 0;
+
+stlink.name=ST-Link V2
+stlink.communication=USB
+stlink.protocol=
+stlink.program.protocol=
+stlink.program.tool=openocd
+stlink.program.interface=stlink-v2
+stlink.program.target=nrf51
+stlink.program.setup_command=transport select hla_swd; set WORKAREASIZE 0x4000;