GitLab

* fix(rainmaker): Add new partition tables

* fix(rainmaker): Update readme file for RM examples

* fix(rainmaker): Hide RM partitions for esp32h2

* add "getBattery" functions + #define simplicity

replaced all function protections with a #define to simplify code functionality.  Also added "getBattery" functions to leverage "esp_modem_get_battery_status" call in ESP-MODEM.

* add "getBattery" function defs to PPP.h

* fix(ppp): uncomment error logging, change new function naming

* fix(ppp): rename new functions for naming conformity

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Update esp32-hal-adc.c

* Update esp32-hal-adc.h

* Update adc.rst

To be merged after release

From now on core libraries will have the same version as the core

* IDF release/v5.1 dc859c1e67

* fix(lwip): Filter out V6 packets if V6 is not enabled

the ESP might accept and act on some IPv6 packets, even though IPv6 is not enabled for the interface in Arduino. This change makes the ESP ignore all IPv6 packets if IPv6 address is not available.

* fix(lwip): DNS header is not required

* fix(ot): Add LWIP_HOOK_IP6_INPUT_CUSTOM support

* feat(ledc): Allow attaching multiple pins to 1 channel

* feat(ledc): Add ledcWriteChannel function

* feat(ledc): Print info about already set channel

* docs(ledc): Add ledcWriteChannel function and attach update

* feat(ledc): Add example and fixes

* feat(ledc): Remove commented code

* feat(ledc): Fix missing new line at end of file

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

The setPins() function obviously comes from the SD_MMC lib. Not prepending
that lib, this code won't compile.
Signed-off-by: Martin Hübner <martin.hubner@web.de>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* add(board): Add M5Stack NanoC6 Dev Kit

M5Stack NanoC6 Dev Kit
https://shop.m5stack.com/products/m5stack-nanoc6-dev-kit

* add(board): Add M5Stack NanoC6 Dev Kit

* add(board): Add M5Stack NanoC6 Dev Kit

* Update boards.txt

* add(board): Add M5Stack NanoC6 Dev Kit

* Rename variants/m5stack_stickc_plus/m5stack_nanoc6/pins_arduino.h to variants/m5stack_nanoc6/pins_arduino.h

* Update boards.txt

* Update pins_arduino.h

* Update pins_arduino.h

* Update boards.txt

m5stack_nanoc6.build.board was not uppercase

* ci(badge): Push only when changes happened to badge

* ci(tests): Fix conclusion status

Add default 16MB partition to esp32wroverkit

* add(board): Add LOLIN S3 Mini Pro

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(nodemcu-32s): Fix Upload Speed menu on Windows

The board definition had 460800 as default upload speed, but that is invalid on Windows, so the menu did not show. This change puts 115200 as default, which will make the menu appear

* fix(board): Make build.board uppercase

* docs(component): Update to 5.1 and add component manager

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(example): Add better WPS logging

Provides a better log of what went wrong when using WPS

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* position_fix

Fix for error return from position()
Issue #9992

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(eth): Allow setting the RX task stack size

Default stack size of 2K might not be enough in some cases. Increase the default to safer 4K and allow setting it to custom value.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Fix timeout in WebServer::_uploadReadByte and set timeout handleClient()

Fixes: #9990

* Set HTTP_MAX_CLOSE_WAIT equal to other HTTP_xxx_WAIT values

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* add new feather c6 rev B :)

* remove the -lzboss_stack.ed.trace per review

* fix pre-commit

---------
Co-authored-by: hathach <thach@tinyusb.org>

* fix(uart): Set back Pin signal polarity

Fixes a problem related to inverting signal polarity back to normal after a previous inversion.

This shall set the correct polarity in Serial.begin().

* fix(uart): Remove useless commentary

Removes a commentary with a question about the inversing polarity function.

* fix(uart): Update comment
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Added LilyGo T3S3 variants

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

If the interface is already connected, try to enable IPv6 immediately. Otherwise the interface would need to go through disconnect/connect cycle for IPv6 to be enabled.

* Update WiFiProv.ino

* fix(wifiprov): Uses BLE for provisioning

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(rmt): allow legacy driver

* feat(rmt): legacy driver example

* fix(rmt): legacy driver example

* fix(rmt): ESP32_ARDUINO_NEW_RMT_DRV_OFF

* fix(rmt): ESP32_ARDUINO_NEW_RMT_DRV_OFF

* fix(rmt): ESP32_ARDUINO_NEW_RMT_DRV_OFF

* fix(rmt): GPIO HAL only

* fix(rmt): error case

* fix(rmt): not necessary change

* ci(pre-commit): Apply automatic fixes

* ci(pre-commit): Ignore build_opt in clangformat

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* feat(board): Adding ViraLink IoT Gate Boards

* feat(board): Adding ViraLink IoT Gate Boards

* feat(board): Adding ViraLink IoT Gate Boards

* feat(board): Adding ViraLink IoT Gate Boards added spi pins

* feat(board): Adding ViraLink IoT Gate Boards added spi pins

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Fixes IDF builds for H2 and C6 when OpenThread is enabled

Fixes XIAO C6 board name in boards.txt file

* feat(OThread): Add Library

* fix(OpenThread): fixes file list in CMakeLists.txt

* fix(openthread): Fixes JSON CI Files

* fix(openthread): Fixes JSON CI Files

* fix(openthread): Include Openthread guarding

* fix(openthread): COAP parametrization

* fix(openthread): Include Openthread guarding

* fix(openthread): Improves commentaries and code

* fix(openthread): Improves code

* fix(openthread): Includes StreamString.h

* feat(openthread): New Scan Example

* feat(openthread): Improved Scan Example

* feat(openthread): README.md

Initial documentation for ESP3 Arduino OpenThread CLI API.

* feat(openthread): helper functions documentation

Create helper_functions.md for ESP32 Arduino OpenThread API

* fix(openthread): begin end

* feat(openthread): onReceice example

* fix(openthread): tx queue error

* fix(doc): fixing documentation apresentation

Fixes the documentation first paragraph in order to make it easier fore reading. It also displays in the very top which SoC are supported by the library.

* fix(doc): documentation format

* feat(openthread): commentary

* fix(openthread): Typo, start/stop console

* fix(openthread): library properties

* ci(pre-commit): Apply automatic fixes

* feat(openthread): formatting text

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>