GitLab

* feat(rmaker): Register common events for better debugging

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

When performing an "OTA" upload via a network port, the user may configure the sketch to require
an authentication password.

Arduino IDE presents a "Configure and Upload" dialog when the user triggers an upload to a network
port. The user can provide the authentication password via the field in that dialog. The
`upload.field.password` platform property is then set to the value provided by the user.

The platform uses the `tools.esp_ota.upload.pattern` command template to pass this value to the
espota upload tool via the tool's `--auth` flag.

Since the value of the `upload.field.password` platform property is set by the user via a free text
field, it might contain any characters. Since some characters (e.g., spaces) can be problematic in
a command line, it is essential to wrap it in quotes. This was done for the Arduino IDE 1.x variant
of the command template, but that was not ported when the pluggable discovery variant of the
command pattern was defined. This causes a spurious failure of the OTA upload process if the user
provides an authentication password that contains problematic characters.

For example:

```
"C:\Users\per\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.4\tools\espota.exe" \
-r -i 192.168.254.145 \
-p 3232 --auth=foo bar \
-f "C:\Users\per\AppData\Local\Temp\arduino\sketches\E2D807FABB134A2A60A1B9C7D14FE02B/11973.ino.bin"
usage: espota.exe [-h] [-i ESP_IP] [-I HOST_IP] [-p ESP_PORT] [-P HOST_PORT]
                  [-a AUTH] [-f FILE] [-s] [-d] [-r] [-t TIMEOUT]
espota.exe: error: unrecognized arguments: bar
Failed uploading: uploading error: exit status 2
```

This is prevented by wrapping the `--auth` flag in quotes:

```
"C:\Users\per\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.4\tools\espota.exe" \
a-r -i 192.168.254.145 \
-p 3232 "--auth=foo bar" \
-f "C:\Users\per\AppData\Local\Temp\arduino\sketches\E2D807FABB134A2A60A1B9C7D14FE02B/11973.ino.bin"
Sending invitation to 192.168.254.145
Authenticating...OK

Uploading: [                                                            ] 0%
```

Fixes the documentation. typo. volts->Volts

* fix(USB): OTG S2 and S3 debug print

ESP32-S2 and S3 using USB CDC OTG (TinyUSB) won't print any log information. This commit fixes that.

* fix(cdc): trying macos

changed Macro testing

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(sd): Fix use after free

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Added Waveshare ESP32-S3-Touch-LCD-1.69 & ESP32-S3-LCD-1.69 board

* Added Waveshare ESP32-S3-Touch-LCD-1.69 & ESP32-S3-LCD-1.69 board

* Change the default PSRAM OPI mode to disabled

* Change the default PSRAM OPI mode to Enabled

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Correct Float type size

Correct in the data type table and the API call the size of the Preferences `Float` type and returned value for `putFloat()`.

* Update Float call prototype

* Correct Float type size

Correct Float type size in the Preferences Types table.
Revise text to use `float_t` in place of `float`.

* Correct doc build error

Correct the `Explicit markup ends without a blank line; unexpected unindent.`

* Update WebServer.ino

* Enable FAT and LittleFS filesystems as configured.
* use new versions of RequestHandler::canHandle and RequestHandler::canUpload

* Update Documentation

* Documentation changed accoring review comments.

* README.md changed accoring to review comments.

* new board esp32s3

* Update boards.txt

add circuitart_zero_s3 details

* Update pins_arduino.h

 removed unnecessary pin definitions pins_arduino.h as suggested by P-R-O-C-H-Y

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Enabled the onboard ceramic antenna by default when creating a new project with XIAO_ESP32C6 (#10066)

* Create variant.cpp

* Update variant.cpp

* Update variant.cpp

* Update pins_arduino.h

* Update variant.cpp

* Update variant.cpp

* Update variant.cpp

* Update variants/XIAO_ESP32C6/variant.cpp
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(net): Add NAPT examples for STA and ETH

* feat(net): Add NAPT example for PPP

* feat(net): Add CI configs to skip H2

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(esp-now): Remove all peers on ESP_NOW.end()

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* fix(uart): Sets XTAL as clock source for uart

C6 and H2 have problems after returning from light sleep. The baud rate seems to be off when APB is used as clock source.

This fix solves the issue using a steady clock source.

* fix(typo): Typo and commentaries

Adds C2 in the XTAL list.

* fix(uart): adjust get/set baudrate

Fixes the functions for reading/writing UART baudrate by using IDF functions instead of HAL/LL.

* fix(uart): uses REF_TICK for ESP32/S2

* fix(uart): esp32/s2 baudrate > 1MHz

Fixes the baudrate for ESP32 and ESP32-S2 when the baud rate is higher than 1MHz.
REF_TICK is just 2MHZ and can handle up to 1MHZ baudrate.

* fix(uart): rxTimeout minimum

Default RxTimeout changed to the minimum = 1.
When TICK_REF is used as clock source, this is mandatory,

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* IDF release/v5.1 5a26d8ae8e

* IDF release/v5.1 b6b4727c58

Prints the value of the chip features bitfield to printChipInfo() to facilitate debugging.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* fix(lwip): Add early out in `NetworkUDP::parsePacket()` when socket has no data

Previously, `NetworkUDP::parsePacket()` would take the time to allocate a 1460 byte buffer
to call `recvfrom()` with, immediately freeing it if there was no data read.

This change has it check if there is available data via `ioctl()` with `FIONREAD` first,
saving the allocation and thus significantly increasing performance in no data situations.

* fix(lwip): Initialize `len` to ensure it's set before check

* ci(wokwi): Pass diagram.json file if exists to pytest

* ci(wokwi): Rename diagrams to enable editing in Wokwi editor

* ci(tests): Use newest pytest version

---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* feat(wifi): Allow setting minimum time for wifi scan

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(board) add Waveshare ESP32-S3-Matrix

Adds support for the Waveshare ESP32-S3-Matrix board. Includes changes to the Rainmaker partitions as per PR #10046 .

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(rainmaker): Add new partition tables

* fix(rainmaker): Update readme file for RM examples

* fix(rainmaker): Hide RM partitions for esp32h2

* add "getBattery" functions + #define simplicity

replaced all function protections with a #define to simplify code functionality.  Also added "getBattery" functions to leverage "esp_modem_get_battery_status" call in ESP-MODEM.

* add "getBattery" function defs to PPP.h

* fix(ppp): uncomment error logging, change new function naming

* fix(ppp): rename new functions for naming conformity

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Update esp32-hal-adc.c

* Update esp32-hal-adc.h

* Update adc.rst

To be merged after release