GitLab

## Summary
Adds support for the new ATMegaZero ESP32-S2 board. Adds the relevant section to `boards.txt` and adds the folder for the `atmegazero-esp32s2` with the proper `pins_arduino.h` to the `variants` folder.

## Impact
Allows users to compile code properly for the ATMegaZero ESP32-S2 without having to use a similar board and manually entering pin numbers.

## Links
[ATMegaZero ESP32-S2](https://atmegazero.com/#/atmegazero_esp32s2_overview)

Thanks!

* Add SparkFun ESP32 MicroMod to boards.txt

Copied from the tarball found in the SparkFun board manager
[JSON](https://raw.githubusercontent.com/sparkfun/Arduino_Boards/main/IDE_Board_Manager/package_sparkfun_index.json),
v1.0.1 -- [tarball can be found here](https://github.com/sparkfun/Arduino_Boards/raw/main/IDE_Board_Manager/sparkfun-esp32-1.0.1.tar.bz2)

* Add `pins_arduino.h` for ESP32 MicroMod
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* The board.txt has been updated. Added variant folder.

Necessary additions for deneyapMiniKart were made in board.txt. Added pins_arduino to variant folder. deneyapMiniKart information has been added.

* Added variant files and added text in board.txt
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result"

"The class Webserver is declared with two explicit constructors, one with signature:
WebServer::WebServer(IPAddress addr, int port)
Using this results in a server listening on the port number obtained by converting the value of the IPAddress addr argument (in host byte order) to a uint32_t and then to a uint16_t, which is manifestly not the result that would be expected.
...
As for a fix, we can assume from these results that this constructor is not being used and therefore could simply be deleted."

* Issue 5507
Reverse changes in commit bee1e7088cef913391155f096b42cd4bb89c5c6f after discussion.
Alternative fix to be done.

* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result"

This change adds support for multi-homed servers to libraries/WiFi.  It was assumed to be there already by libraries/WebServer, but was not.
This led to unexpected results when the IP address-specific constructor of class WebServer was used (see issue 5507).

This change was tested using three concurrent instances of WebServer, one bound to the WiFi station address, one bound to the WiFi soft AP address,
and one bound to INADDR_ANY.  See libraries/WebServer/examples/MultiHomedServers for the test method.

* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result" (cont.)
This fixes what I think might be the cause of CI failures on GitHub for the previous commit, namely the absence of an include file
in examples/MultiHomedServers.

* Fix issue #5507 "Constructor WebServer::WebServer(IPAddress addr, int port) produces an unexpected result" (cont.)

Change port numbers in examples/MultiHomedServers per pull-request comment from me-no-dev ...
"for this test to be valid, both servers should be on the same port. That is how you can make sure that the functionality works."

This PR adds the support for the Franzininho WiFi board in CDC and MSC modes.

References: https://franzininho.github.io/docs-franzininho-site/docs/franzininho-wifi/franzininho-wifi/
https://github.com/Franzininho/imagens-franzininho/blob/main/franzininho_wifi/pinagem-franzininho-wifi.png

Moved links to the botton

Fixes: https://github.com/espressif/arduino-esp32/issues/5562

[DOCS] Added LOLIN dev kits links to the boards list in the documentation

```
/* 0x0000 */ 0x7b, 0x7b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // {{..............
/* 0x0010 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // ................
```

Fixes #5493 

## Summary
PR #4996 has broken Touch Interrupt functionality by removing a single line of code used to set a Register.


## Impact
This PR fixes issue #5493 by reverting the removal of necessary code as described above.

Thanks @chegewara

I2C Scan was failing because i2c_master_write does not accept size of 0. This change checks and skips that call if no length is provided (usually when scanning)

ET-Board
No internal LED pin
Missing internal LED pin have been added to this commit.

Fix issue #5506 "WebServer serveStatic () can cause LoadProhibited exception in _svfprintf_r" (#5508)

"Using a Core Debug Level of Verbose and the WebServer serveStatic() function with the default value of nullptr for its cache_header argument, results in a LoadProhibited exception in _svfprintf_r().
This is because serveStatic() calls log_v() with cache_header corresponding to a "%s" in its format but without checking that cache_header is not nullptr, and then logv() (indirectly) calls _svfprintf_r().
On the other hand, with a Core Debug Level other than Verbose, this does not occur."

Changed serveStatic() to the check value of cache_header and if it is nullptr, instead pass an empty string to log_v().

## Summary
https://github.com/espressif/arduino-esp32/pull/5487 introduced a default timeout for WiFiClient, however the default was specified in milliseconds instead of seconds, see https://github.com/espressif/arduino-esp32/commit/be84c8219c251210afd87cac71b8ef3527b601b3#commitcomment-54358731
This 3ms timeout breaks OTA when the processor is busy.

## Impact
Sets the default to a saner value, fixes OTA.

Fixes: https://github.com/espressif/arduino-esp32/issues/5513

Can still race if Serial.begin() is not called in setup()

Fixes: https://github.com/espressif/arduino-esp32/issues/5503

* Add initial support for USB MSC

* Add Firmware Upload/Download With MSC

Current running firmware is available as file inside the MSC Disk. To update the firmware on the ESP, just copy a regular firmware bin into the drive

* Support overwriting of the firmware file

Overwriting a file is done totally differently on MacOS, Windows and Linux. This change supports it on all of them.

* Allow CDC, FirmwareMSC and DFU to be enabled on boot

* Add example ESP32-S2 USB-ONLY board

* Various device code optimizations

Added `end()` methods to MSC classes
Made begin() methods safe to be called multiple times
Optimized CDC class

* Fix CDC Connect/Disconnect detection in Arduino IDE on Windows

* Rework cdc_write

* Update ESP32-S2 board configs

## The problem
WiFiClient's connect method variant where no timeout is passed can block esp32 MCU and may then cause watchdog to kick in and reset the device. This behavior is different from that, what is in arduino-esp8266 core.

## Summary
Some cross-esp libraries (working both on esp32 and 8266), like PubSubClient simply call connect method on WiFiClient, to get connected to remote server. However, connect behavior varies betwen esp arduino 8266 and esp arduino 32 cores. This pull request tries introduce same behavior - to make connect method non-blocking on esp32, like it is with 8266 arduino core.

## Proposed solution
Introduce default fixed timeout that can be changed by #define - by default set to 3 seconds.

### Affected components: 
WiFiClient

### Affected methods:
```c++ 
int connect(IPAddress ip, uint16_t port);
int connect(const char *host, uint16_t port);
```

### Impact
May impact projects or libraries using connect method variant without specified timeout, where:
- remote is located far away or
- connection is heavily limited, or
- remote is slow, when it comes to accept the connection

In [HTTPClient](https://github.com/espressif/arduino-esp32/tree/master/libraries/HTTPClient), if the `Transfer-Encoding` header is set to `identity`, an error (Transfer-Encoding not supported) will occur.

HTTPClient will consider the request as `identity` if the `Transfer-Encoding` header is not set. But it is also defined a response with `identity` explicitly set in the `Transfer-Encoding` header (ref:[MDN Web Docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Transfer-Encoding)).

This pull request will allow the request to be processed normally even when `identity` is explicitly set.

Fixes: https://github.com/espressif/arduino-esp32/issues/4842

Fixes: https://github.com/espressif/arduino-esp32/issues/5488

CLASSIC_BT_ENABLED never worked as was incorrectly named, e.g. see
https://github.com/nkolban/esp32-snippets/issues/890#issuecomment-521520934
Now corrected to the update-to-date name CONFIG_BT_CLASSIC_ENABLED.

Fixes: #5375
Fixes: #5050

esp-dsp: master f4d7d6e
esp-face: master 420fc7e
esp-rainmaker: f1b82c7
esp32-camera: master 6a9497b
esp_littlefs: master b58f00c

Adding first version of PULL_REQUEST_TEMPLATE.md.

The purpose of this template is to improve and simplify writing more accurate Release Notes.

Newly compiled esp32-camera driver from https://github.com/espressif/esp32-camera

lwip lib bundled with esp32 Arduino supports only one ntp server. Any additional servers set are just silently ignored.
This default is different from esp8266 Arduino core and very confusing. Most of the examples provided uses 3 different ntp servers for redundancy while only the first one is used actually.
Addressing issue #4964

Fixes: #5429

Closes #5398

Using the same non-blocking socket connect pattern for respecting connection timeout, copied from WiFiClient::connect.

WiFiClient::connect uses lwip_connect_r, whereas start_ssl_client uses lwip_connect. I haven't found what is the difference between them. I tested both, both work ok, so I kept lwip_connect.

- Device will not reset if previous baudrate was not 9600
- CDC Device is not recognized if WebUSB is enabled

* Fix compile archive arguments for the new toolchain

* Add menu to S2 for picking through which port to upload

Internal USB CDC requires to reset and wait for the new port (because persistence is not yet stable)

* USB CDC should also be started in main

* Fix URL and USB version for WebUSB

* Update vendor callback API

* Update CDC::write to use TX_DONE semaphore

* Update USB_Serial example