GitLab

* Fixes EspClass::deepSleep(64 bits)

This will change time in microseconds from 32 bits to 64 bits as defined in IDF.

* updates function declaration

fix(adc): Always use default read resolution in __analogReadMilliVolts to obtain correct milliVolts value. (#9006)

Add new __analogReadRaw function and move code from __analogRead without mapResolution part to __analogReadRaw.

Refactor __anlogRead to use analogReadRaw (and mapResolution).

Refactor __analogReadMilliVolts to always use default read resolution when reading adc value, as expected input by esp_adc_cal_raw_to_voltage is in default resolution (means replacing all calls of __analogRead with __analogReadRaw).

* Add relative path to test script

* Use /usr/bin/env bash

* Add MatrixPortal ESP32-S3 (WIP)

* Update bootloader files, etc.

* Add MatrixPortal S3 PSRAM setup to boards.txt

* fix neopixel pin

* initialize bsp

* ?

* new variant for tft board with RGB666 40-pin display contact

* fix menu name

* fix neopixel pins

* more pin defs

* second bootloader file

* fix partition

* Update variants/adafruit_camera_esp32s3/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update variants/adafruit_qualia_s3_rgb666/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* add some #'s

* hardware design mistakes? in this economy? now we can use PSRAM and SPI at the same time :)

---------
Co-authored-by: Phillip Burgess <paintyourdragon@dslextreme.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Add IOXESP32 / IOXESP32PS board

* Add ATD1.47-S3 board

---------
Co-authored-by: Max <7087907+maxpromer@users.noreply.github.com>

Corrected analog I/O, BUILTIN_LED and added missing soc/soc_caps.h.

Before neopixelWrite() would end up in / RMT GPIO ERROR / set gpio for RMT driver failed / rmtInit(): RMT failed to initilize. => None working onboard RGB LED.

* M5CoreS3

followup to #8161 #8274 #8276

* Add files via upload

* Fix partition names

* Update platform.txt to 2.0.12

* Update package.json to 2.0.12

* Update esp_arduino_version.h to 2.0.12

* Update to upcoming 2.0.13

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* disable ETH if CONFIG_ETH_ENABLED not defeined in sdkconfig.h

* Include sdkconfig before checking config values

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* detaches previous pins in setPins()

* detaches previous pins in begin()

* allows setPins() or end() before begin() - detach pins

* fixes code TAB

* setPins() shouldn't detach pin = -1

* Test GPIO number in attachInterrupt()

* Fixes S3 GPIO48 in digitalPinToInterrupt()

* Changes test of GPIO number in attachInterrupt()

* Fixes NUM_DIGITAL_PINS in Adafruit board

* Fixes GPIO48 in Edgebox-ESP-100 board

* Nano ESP32: fix previous merge issues

* platform: remove previous build options if file is missing

"touch" would create the file if not present, but not delete its
contents if a previous run left the file in the build dir.

* platform: make debug_custom.json file customizable by board

* platform: fix default debug prefix

"debug.toolchain.prefix" must end with a dash, since only the tool name is
appended to this string.

The reason this is not a major issue is that the "debug_custom.json" file
(copied in the sketch directory when debugging is enabled) forces its own
prefix. And to make things more interesting, the "toolchainPrefix" entry
in that file should _not_ end with a dash.

* Nano ESP32: add debugging support

* Nano ESP32: fix digital, analog and GPIO pin counts

* Nano ESP32: fix previous merge issues

* platform: remove previous build options if file is missing

"touch" would create the file if not present, but not delete its
contents if a previous run left the file in the build dir.

* platform: make debug_custom.json file customizable by board

* platform: fix default debug prefix

"debug.toolchain.prefix" must end with a dash, since only the tool name is
appended to this string.

The reason this is not a major issue is that the "debug_custom.json" file
(copied in the sketch directory when debugging is enabled) forces its own
prefix. And to make things more interesting, the "toolchainPrefix" entry
in that file should _not_ end with a dash.

* Nano ESP32: add debugging support

* io_pin_remap: additional bugfixes

- FunctionalInterrupt.h: prevent macro expansion in declaration
- io_pin_remap.h: fix remaining pin-remapped functions whose API
  allow a variable number of parameters

* Nano ESP32: make GPIO matrix reset robust to pin mode choice

* Nano ESP32: add backwards-compatible pin definitions

* Nano ESP32: erase flash when running "Burn Bootloader"

* Nano ESP32: add filesystem type selection

* io_pin_remap: additional bugfixes

- FunctionalInterrupt.h: prevent macro expansion in declaration
- io_pin_remap.h: fix remaining pin-remapped functions whose API
  allow a variable number of parameters

* Nano ESP32: make GPIO matrix reset robust to pin mode choice

* Nano ESP32: add backwards-compatible pin definitions