Add Additional Adafruit boards including the new Qualia ESP32-S3 and Camera ESP32-S3 (#8696)

* Add MatrixPortal ESP32-S3 (WIP)

* Update bootloader files, etc.

* Add MatrixPortal S3 PSRAM setup to boards.txt

* fix neopixel pin

* initialize bsp

* ?

* new variant for tft board with RGB666 40-pin display contact

* fix menu name

* fix neopixel pins

* more pin defs

* second bootloader file

* fix partition

* Update variants/adafruit_camera_esp32s3/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update variants/adafruit_qualia_s3_rgb666/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* add some #'s

* hardware design mistakes? in this economy? now we can use PSRAM and SPI at the same time :)

---------
Co-authored-by: Phillip Burgess <paintyourdragon@dslextreme.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

variants/adafruit_camera_esp32s3/partitions-4MB-1ota.csv

+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,          0x8000, 4K
+
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    app,  ota_0,   0x10000,  2816K,
+uf2,      app,  factory,0x2d0000,  256K,
+ffat,     data, fat,    0x310000,  960K,

variants/adafruit_camera_esp32s3/pins_arduino.h

+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+
+#define USB_VID            0x239A
+#define USB_PID            0x8117
+#define USB_MANUFACTURER   "Adafruit"
+#define USB_PRODUCT        "Camera ESP32-S3"
+#define USB_SERIAL         "" // Empty string for MAC adddress
+
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       20
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+static const uint8_t PIN_NEOPIXEL = 1;
+static const uint8_t NEOPIXEL_PIN = 1;
+
+//static const uint8_t TFT_BACKLIGHT = 41;
+static const uint8_t TFT_DC        = 40;
+static const uint8_t TFT_CS        = 39;
+static const uint8_t TFT_RESET     = 38;
+static const uint8_t TFT_RST       = 38;
+
+static const uint8_t SD_CS          = 48;
+static const uint8_t SD_CHIP_SELECT = 48;
+static const uint8_t SPEAKER        = 41;
+
+static const uint8_t SDA = 33;
+static const uint8_t SCL = 34;
+
+static const uint8_t SS    = 48;
+static const uint8_t MOSI  = 35;
+static const uint8_t SCK   = 36;
+static const uint8_t MISO  = 37;
+
+static const uint8_t A0 = 17;
+static const uint8_t A1 = 18;
+static const uint8_t BATT_MONITOR = 4;
+static const uint8_t SHUTTER_BUTTON = 0;
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t DAC1 = 17;
+static const uint8_t DAC2 = 18;
+
+#define AWEXP_SPKR_SD 0
+#define AWEXP_BUTTON_SEL 1
+#define AWEXP_BACKLIGHT 2
+#define AWEXP_CAM_PWDN 7
+#define AWEXP_SD_DET 8
+#define AWEXP_SD_PWR 9
+#define AWEXP_CAM_RST 10
+#define AWEXP_BUTTON_OK 11
+#define AWEXP_BUTTON_RIGHT 12
+#define AWEXP_BUTTON_UP 13
+#define AWEXP_BUTTON_LEFT 14
+#define AWEXP_BUTTON_DOWN 15
+
+#define PWDN_GPIO_NUM     -1 // connected through expander
+#define RESET_GPIO_NUM    -1 // connected through expander
+#define XCLK_GPIO_NUM      8
+#define SIOD_GPIO_NUM     SDA
+#define SIOC_GPIO_NUM     SCL
+
+#define Y9_GPIO_NUM        7
+#define Y8_GPIO_NUM        9
+#define Y7_GPIO_NUM       10
+#define Y6_GPIO_NUM       12
+#define Y5_GPIO_NUM       14
+#define Y4_GPIO_NUM       16
+#define Y3_GPIO_NUM       15
+#define Y2_GPIO_NUM       13
+#define VSYNC_GPIO_NUM     5
+#define HREF_GPIO_NUM      6
+#define PCLK_GPIO_NUM     11
+
+
+#endif /* Pins_Arduino_h */

variants/adafruit_camera_esp32s3/variant.cpp

+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Ha Thach (tinyusb.org) for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+#include "esp32-hal-gpio.h"
+#include "pins_arduino.h"
+
+extern "C" {
+
+// Initialize variant/board, called before setup()
+void initVariant(void)
+{
+
+}
+}

variants/adafruit_metro_esp32s3/pins_arduino.h

@@ -19,8 +19,8 @@
 
 #define LED_BUILTIN     13
 
-#define PIN_NEOPIXEL    45
-#define NEOPIXEL_PIN    45
+#define PIN_NEOPIXEL    46
+#define NEOPIXEL_PIN    46
 #define NEOPIXEL_NUM    1
 
 #define PIN_BUTTON1     0  // BOOT0 switch
@@ -33,10 +33,10 @@ static const uint8_t RX = 41;
 static const uint8_t SDA = 47;
 static const uint8_t SCL = 48;
 
-static const uint8_t SS   = 21;
-static const uint8_t MOSI = 35;
-static const uint8_t SCK  = 36;
-static const uint8_t MISO = 37;
+static const uint8_t SS   = 45;
+static const uint8_t MOSI = 42;
+static const uint8_t SCK  = 39;
+static const uint8_t MISO = 21;
 
 static const uint8_t A0 = 14;
 static const uint8_t A1 = 15;

variants/adafruit_metro_esp32s3/variant.cpp

@@ -30,7 +30,8 @@ extern "C" {
 
 // Initialize variant/board, called before setup()
 void initVariant(void) {
-  // default SD_CS to input pullup
+  // default SD_CS to input pullup (we cannot have built in pullup since its
+  // a strapping pin!)
   pinMode(SS, INPUT_PULLUP);
 }
 

variants/adafruit_qualia_s3_rgb666/partitions-16MB-tinyuf2.csv

+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,,         0x8000, 4K
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    app,  ota_0,   0x10000,  2048K,
+ota_1,    app,  ota_1,  0x210000,  2048K,
+uf2,      app,  factory,0x410000,  256K,
+ffat,     data, fat,    0x450000,  11968K,

variants/adafruit_qualia_s3_rgb666/pins_arduino.h

+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID            0x239A
+#define USB_PID            0x8147
+
+#define USB_MANUFACTURER   "Adafruit"
+#define USB_PRODUCT        "Qualia ESP32-S3 RGB666"
+#define USB_SERIAL         "" // Empty string for MAC adddress
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       2
+
+#define analogInputToDigitalPin(p)  (((p)<NUM_ANALOG_INPUTS)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<EXTERNAL_NUM_INTERRUPTS)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+static const uint8_t PCA_TFT_SCK = 0;
+static const uint8_t PCA_TFT_CS = 1;
+static const uint8_t PCA_TFT_RESET = 2;
+static const uint8_t PCA_CPT_IRQ = 3;
+static const uint8_t PCA_TFT_BACKLIGHT = 4;
+static const uint8_t PCA_BUTTON_UP = 5;
+static const uint8_t PCA_BUTTON_DOWN = 6;
+static const uint8_t PCA_TFT_MOSI = 7;
+
+static const uint8_t TX = 16;
+static const uint8_t RX = 17;
+#define TX1 TX
+#define RX1 RX
+
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 18;
+
+static const uint8_t SS   = 15;
+static const uint8_t MOSI = 7;
+static const uint8_t MISO = 6;
+static const uint8_t SCK  = 5;
+
+static const uint8_t A0 = 17;
+static const uint8_t A1 = 16;
+
+static const uint8_t T3  = 3;  // Touch pin IDs map directly
+static const uint8_t T8  = 8;  // to underlying GPIO numbers NOT
+static const uint8_t T9  = 9;  // the analog numbers on board silk
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+
+
+ static const uint8_t TFT_R1 = 11;
+ static const uint8_t TFT_R2 = 10;
+ static const uint8_t TFT_R3 = 9;
+ static const uint8_t TFT_R4 = 46;
+ static const uint8_t TFT_R5 = 3;
+ static const uint8_t TFT_G0 = 48;
+ static const uint8_t TFT_G1 = 47;
+ static const uint8_t TFT_G2 = 21;
+ static const uint8_t TFT_G3 = 14;
+ static const uint8_t TFT_G4 = 13;
+ static const uint8_t TFT_G5 = 12;
+ static const uint8_t TFT_B1 = 40;
+ static const uint8_t TFT_B2 = 39;
+ static const uint8_t TFT_B3 = 38;
+ static const uint8_t TFT_B4 = 0;
+ static const uint8_t TFT_B5 = 45;
+ static const uint8_t TFT_PCLK = 1;
+ static const uint8_t TFT_DE = 2;
+ static const uint8_t TFT_HSYNC = 41;
+ static const uint8_t TFT_VSYNC = 42;
+
+#endif /* Pins_Arduino_h */

variants/adafruit_qualia_s3_rgb666/variant.cpp

+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Ha Thach (tinyusb.org) for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+#include "esp32-hal-gpio.h"
+#include "pins_arduino.h"
+
+extern "C" {
+
+// Initialize variant/board, called before setup()
+void initVariant(void) {
+  // default SD_CS to input pullup
+  pinMode(SS, INPUT_PULLUP);
+}
+
+}