GitLab

This commit addes an example showing how to receive messages using the TWAI
driver interface and a CAN transceiver. Specifically, the example demonstrates:

- How to configure and install the TWAI drvier
- How to poll for TWAI events (i.e., alerts) using twai_read_alerts()
- How to handle the various events (such as TWAI_ALERT_RX_DATA)

Closes https://github.com/espressif/arduino-esp32/pull/7430Co-authored-by: Stephan Martin <designer2k2@gmail.com>

* Add new board: RedPill ESP32S3.

* Change LED definition to keep compatibility.

* Add I2C and SPI pin definitions to wt32-eth01 pins

Added missing pins based on testing using a RTC (I2C) and SD card reader (SPI).

* Remove define macros
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

These instructions are based on esp32-arduino-lib-builder's build process, including https://github.com/espressif/esp32-arduino-lib-builder/blob/master/tools/update-components.sh which explains how to clone tinyusb.

* Added enableScenes API

* Added enableScenes API documentation

* Added enableScenes API to example
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* ESP-IDF v4.4.3

Improves WiFi reconnection

* Add new board (Deneyap Kart 1A)

* Update pins_arduino.h

* Add newly  board (Deneyap Kart G)

New Deneyap Family member, wearable development board

* updated Deneyap boards pin_arduino.h files

* Update boards.txt

* Update pins_arduino.h

* updated deneyap boards pins_arduino.h

* updated Deneyap boards variants files

* updated Deneyap boards pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

which prevent changing to other partition scheme

* add touch.rst

* update touchRead comment in header file

* Edited examples

* typo changes + updates

* about edit

* Add ESP32S3 to libraries support list

* Update libraries.rst

* Add the Partition Scheme Menu to HELTEC LoRa32 V1

This is missing from many boards, i may add that to all of them

* reordered heltec_wifi_lora_32 partition options
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* added test for touch peripheral

* removed cfg.json

* pass test for unsupported chips

* fixed condition

* changed released value for S2

* add new chip error

* Update RMakerDevice.h

Changer spelling of addTemprature

* Update RMakerDevice.cpp

Cahnge Spelling of add TempratureParam

* Update README.md

Update documentation addTemperatureParam

... while readValue

* Added OTA Event Handlers

* Overrided verifyRollbackLater Method
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>

Update:
* actions/checkout
* actions/setup-python
* actions/cache

https://github.blog/changelog/2022-09-22-github-actions-all-actions-will-begin-running-on-node16-instead-of-node12/

Fixed #7406 . The "reason2str" macro in WiFiGeneric.cpp tries to read memory from index "-1"  in "system_event_reasons" array when handling STA_DISCONNECTED event with reason 0. Dealing with reason 0 as a reason 1 (WIFI_REASON_UNSPECIFIED) will solve the problem (the reason for this event to arrive with reason 0 is unknown). #7406

The original code assumes 100Hz FreeRTOS tick rate and just supplies vTaskDelay with the assumed number of ticks required for the wanted delay. This patch simply fixes it to use portTICK_PERIOD_MS, thereby working correctly regardless of what tick rate FreeRTOS has been configured to run at.

Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com>

Somehow the fix #7129 was not applied to NORA-W10 probably both changes were happening at around the same time, this PR fixes this.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

As per #6962 we have another case of build.flash_type incorrectly named qspi; this commit fixes the issue for the unphone9 board.
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

TBeam adds a revision option to facilitate the differentiation of boards of different versions (#7332)
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update of supported SoCs

Changed ESP32-S3 support to stable.

* Update getting_started.rst
Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com>

* Added support for Cytron Maker Feather AIoT S3.

* 1. Select OPI PSRAM by default.
2. Fixed pin name error in variant.cpp.
3. Added definition for RGB_BUILTIN.

* Define the RGB_BUILTIN as shown in #6979.

* Added pin definition for A12 (Vin Sense).

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

board.txt

Add v2.0.5 into Issue Template

Update of Issue template with addition of new version 2.0.5.

* Doc update: added note about global arduino component

* Requested changne IDF -> ESP-IDF