GitLab

Prints the value of the chip features bitfield to printChipInfo() to facilitate debugging.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* fix(lwip): Add early out in `NetworkUDP::parsePacket()` when socket has no data

Previously, `NetworkUDP::parsePacket()` would take the time to allocate a 1460 byte buffer
to call `recvfrom()` with, immediately freeing it if there was no data read.

This change has it check if there is available data via `ioctl()` with `FIONREAD` first,
saving the allocation and thus significantly increasing performance in no data situations.

* fix(lwip): Initialize `len` to ensure it's set before check

* ci(wokwi): Pass diagram.json file if exists to pytest

* ci(wokwi): Rename diagrams to enable editing in Wokwi editor

* ci(tests): Use newest pytest version

---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* feat(wifi): Allow setting minimum time for wifi scan

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(board) add Waveshare ESP32-S3-Matrix

Adds support for the Waveshare ESP32-S3-Matrix board. Includes changes to the Rainmaker partitions as per PR #10046 .

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(rainmaker): Add new partition tables

* fix(rainmaker): Update readme file for RM examples

* fix(rainmaker): Hide RM partitions for esp32h2

* add "getBattery" functions + #define simplicity

replaced all function protections with a #define to simplify code functionality.  Also added "getBattery" functions to leverage "esp_modem_get_battery_status" call in ESP-MODEM.

* add "getBattery" function defs to PPP.h

* fix(ppp): uncomment error logging, change new function naming

* fix(ppp): rename new functions for naming conformity

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Update esp32-hal-adc.c

* Update esp32-hal-adc.h

* Update adc.rst

To be merged after release

From now on core libraries will have the same version as the core

* IDF release/v5.1 dc859c1e67

* fix(lwip): Filter out V6 packets if V6 is not enabled

the ESP might accept and act on some IPv6 packets, even though IPv6 is not enabled for the interface in Arduino. This change makes the ESP ignore all IPv6 packets if IPv6 address is not available.

* fix(lwip): DNS header is not required

* fix(ot): Add LWIP_HOOK_IP6_INPUT_CUSTOM support

* feat(ledc): Allow attaching multiple pins to 1 channel

* feat(ledc): Add ledcWriteChannel function

* feat(ledc): Print info about already set channel

* docs(ledc): Add ledcWriteChannel function and attach update

* feat(ledc): Add example and fixes

* feat(ledc): Remove commented code

* feat(ledc): Fix missing new line at end of file

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

The setPins() function obviously comes from the SD_MMC lib. Not prepending
that lib, this code won't compile.
Signed-off-by: Martin Hübner <martin.hubner@web.de>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* add(board): Add M5Stack NanoC6 Dev Kit

M5Stack NanoC6 Dev Kit
https://shop.m5stack.com/products/m5stack-nanoc6-dev-kit

* add(board): Add M5Stack NanoC6 Dev Kit

* add(board): Add M5Stack NanoC6 Dev Kit

* Update boards.txt

* add(board): Add M5Stack NanoC6 Dev Kit

* Rename variants/m5stack_stickc_plus/m5stack_nanoc6/pins_arduino.h to variants/m5stack_nanoc6/pins_arduino.h

* Update boards.txt

* Update pins_arduino.h

* Update pins_arduino.h

* Update boards.txt

m5stack_nanoc6.build.board was not uppercase

* ci(badge): Push only when changes happened to badge

* ci(tests): Fix conclusion status

Add default 16MB partition to esp32wroverkit

* add(board): Add LOLIN S3 Mini Pro

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(nodemcu-32s): Fix Upload Speed menu on Windows

The board definition had 460800 as default upload speed, but that is invalid on Windows, so the menu did not show. This change puts 115200 as default, which will make the menu appear

* fix(board): Make build.board uppercase

* docs(component): Update to 5.1 and add component manager

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(example): Add better WPS logging

Provides a better log of what went wrong when using WPS

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* position_fix

Fix for error return from position()
Issue #9992

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(eth): Allow setting the RX task stack size

Default stack size of 2K might not be enough in some cases. Increase the default to safer 4K and allow setting it to custom value.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Fix timeout in WebServer::_uploadReadByte and set timeout handleClient()

Fixes: #9990

* Set HTTP_MAX_CLOSE_WAIT equal to other HTTP_xxx_WAIT values

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* add new feather c6 rev B :)

* remove the -lzboss_stack.ed.trace per review

* fix pre-commit

---------
Co-authored-by: hathach <thach@tinyusb.org>

* fix(uart): Set back Pin signal polarity

Fixes a problem related to inverting signal polarity back to normal after a previous inversion.

This shall set the correct polarity in Serial.begin().

* fix(uart): Remove useless commentary

Removes a commentary with a question about the inversing polarity function.

* fix(uart): Update comment
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>