GitLab

* Added board definition
Signed-off-by: Roman Hosek <roman.hosek@iotbakery.com>

* fix typo

* variant + pin definition

Adding the -g3 flag that was omitted in the PIO build script but is present in Arduino IDE build scripts. This flag restores the ability to get line numbers from stack traces for elf files generated in PlatformIO IDE.

* Add default pin mapping for Serial1 and Serial2

* Default pin remap on wESP32

Improved default pin mapping for I2C0 and UART1 to avoid issues
with programming.
SDA0 was on IO2 but IO2 needs to be pulled low on reset to enable
serial programming, which conflicts with I2C pull-ups.
RX1 was on IO12, idle UART level is high which conflicts with
IO12 needing to be low on reset to select correct 3.3V flash
voltage.
New mappings:
SDA0 on IO15
RX1 on IO13
TX1 on IO12

* WiFi.macaddress() returns mac address

* change description

* return macaddress when WiFi mode is WIFI_MODE_NULL

* An example to read high frequency analog data using i2s_adc

* Changed random() to use Lemire's method for bounding

* Update IDF to abea9e4c0

* Update esptool

* Enable PSRAM for PICO D4

* Enable APP_ROLLBACK_ENABLE

@tread-Qualitrol discovered this error.

In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision.
In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC

* Clarified comments and debug messages

Made debug messages and comments easier to understand/grammatical fixes

* few more fixes

* Add timeout to WiFiClient.connect()

* Changed default handling

* Board T-Beam: Update pins_arduino.h

DAC2 is not wired, only DAC1 is -> corrected
LORA pins 27 + 19 are only wired on pcb, but not connected to header -> deleted

* Update pins_arduino.h

Button and LED added

* fix log error code format

* remove useless condition in if statement

* add missing EEPROM lib to CMakeLists.txt, moved the EEPROM files to proper directory

* add missing EEPROM lib to CMakeLists.txt, moved the EEPROM files to proper directory

* Webserver fix logging (#1)

* Change logging to use esp32-hal-log.h

fixes #2355

* adjust log parameter output positions, reduce lines

The DEBUG_ESP method used less lines than I originally set `log_v` to use when displaying the details of the received params ("@" and "=" indexes, and File info on a single line)

Executing python2 get.py behind proxy give error "IOError: [Errno socket error] [SSL: UNKNOWN_PROTOCOL] unknown protocol (_ssl.c:590)"

Pin 2 is not found on the [Adafruit docs](https://learn.adafruit.com/adafruit-huzzah32-esp32-feather) for this board and 33 was suggested in #1586 as a fix. I've tried this locally on my board and it is working correctly.

* Fix BananaPi-BIT DAC definition

* Update t-beam too

* I2C debugging and Log Dump Explaination

Create a help file for I2C debugging and interpretation of log dumps

* Update i2c_debugging.md

version

* add formatting, file locations

* An example to read high frequency analog data using i2s_adc

* HiFreq_ADC.ino

Fixes: https://github.com/espressif/arduino-esp32/issues/2316

Add download counter for releases