GitLab

* fix(uart): sleep retention

sets new flag from IDF 5.3 that causes error with Serial.begin(115200).

* fix(typo): typo and commentaries

* feat(uart): adds memset to make structure empty

* fix(uart): missing parentesis - typo

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(timer): Typo - milis instead of millis.

* fix(doc0: format

fix CI error about format

---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>

* fix(get.py): Add version checking of installed tools

* change(tools): Push generated binaries to PR

* Fix for different file formats

* change(tools): Push generated binaries to PR

* fix paths

* change(tools): Push generated binaries to PR

* Move to using checksum

* change(tools): Push generated binaries to PR

* Clean code

* change(tools): Push generated binaries to PR

* Add checksum check for libs

* change(tools): Push generated binaries to PR

* ci(pre-commit): Apply automatic fixes

* change(tools): Push generated binaries to PR

---------
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Required to start compilation. Board is currently hidden and many options are removed

* fix(esp32): Fixed the hint for the builtin neopixleWrite() function

* change(esp32): Added neopixelWriteOrdered() function

* change(esp32): Added neopixelWriteOrdered() function

* change(esp32): Added neopixelWriteOrdered() function

* change(esp32): Added the possibility to specify LED color order

* change(esp32): Added the possibility to specify LED color order

* feat(rgbled): add license information

* feat(rgbled): add color order enum

* feat(rgbled): add color order feature

* feat(rgbled): change color order for lolin_s3_mini

* fix(rgbled): suffix

* fix(rgbled): suffix

* ci(pre-commit): Apply automatic fixes

* fix(rgbled): it lacks GRB case

Made GRB default + switch/case exceptions.

* fix(rgbled): add guard for rgb_led_color_order_t

If RGB_BUILTIN_LED_COLOR_ORDER is not defined, the type rgb_led_color_order_t won't be declared.

* fix(rgb-led): Implement rgbLedWriteOrdered()

* ci(pre-commit): Apply automatic fixes

* Remove const to allow changing the order

---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: me-no-dev <hristo@espressif.com>

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

Problem detected with ESP32 and ESP32-S2 when the baudrate goes to 460600 bps.

REF_TICK (2MHz) seem not to work properly.
Limiting the use of REF_TICK for up to 205 Kbps.

* Add CodeCell ESP32C3 variant folder

feat(variants): Add CodeCell ESP32C3 variant folder

Added the `codecell` folder to the `arduino-esp32/variants` directory to support the CodeCell ESP32C3 board. This folder includes the necessary pin mappings and configuration files.

* Update boards.txt for CodeCell ESP32C3

chore(board): Update boards.txt for CodeCell ESP32C3

Updated the boards.txt configuration to include settings specific to the CodeCell ESP32C3 board, such as upload speed and partition schemes.

* Update variants/CodeCell/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Delete variants/CodeCell directory

* Add codecell ESP32C3 variant folder

feat(variants): Add codecell ESP32C3 variant folder

Added the CodeCell ESP32C3 variant folder to support the CodeCell ESP32C3 board.
This folder contains the necessary pin mappings and configuration files.

* Update pins_arduino.h

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Added LILYGO T-Watch-S3 & T-Watch-Ultra variants

* Remove extra line breaks

* Change the maximum upload limit of the rainmaker partition table

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(3rd_party_board): Add Fri3d Badge 2024 (ESP32-S3 WROOM 1)

Image: https://github.com/Fri3dCamp/badge_2024/blob/main/docs/badge2024.jpg

More info on https://github.com/Fri3dCamp/badge_2024

* fix(3rd_party_board): Fix built in led for fri3d badge 2024

and use less X_ variables

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(board): Add Alfredo NoU3

Add board support for Alfredo Systems NoU3.

https://www.alfredosys.com/products/alfredo-nou3/

* fix(board): added I2C and SS pins to alfredo nou3

* fix(board): set SPI and I2C pin defs to -1

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Update M5Stack related board and pin configuration

* Remove redundant definitions

* Roll back the rainmaker partition table related configuration

* delete pid & vid

* fix(prov): Use network_provisioning

* IDF release/v5.1 5c57dfe949

* fix(prov): Add sketch and CMake fixes

* fix(prov): Fix build for ESP32-C2

* ci(pre-commit): Apply automatic fixes

* fix(prov): Improve WiFiProv library and QRcode print

* IDF release/v5.1 c608177cf9

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(rmaker): Register common events for better debugging

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

When performing an "OTA" upload via a network port, the user may configure the sketch to require
an authentication password.

Arduino IDE presents a "Configure and Upload" dialog when the user triggers an upload to a network
port. The user can provide the authentication password via the field in that dialog. The
`upload.field.password` platform property is then set to the value provided by the user.

The platform uses the `tools.esp_ota.upload.pattern` command template to pass this value to the
espota upload tool via the tool's `--auth` flag.

Since the value of the `upload.field.password` platform property is set by the user via a free text
field, it might contain any characters. Since some characters (e.g., spaces) can be problematic in
a command line, it is essential to wrap it in quotes. This was done for the Arduino IDE 1.x variant
of the command template, but that was not ported when the pluggable discovery variant of the
command pattern was defined. This causes a spurious failure of the OTA upload process if the user
provides an authentication password that contains problematic characters.

For example:

```
"C:\Users\per\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.4\tools\espota.exe" \
-r -i 192.168.254.145 \
-p 3232 --auth=foo bar \
-f "C:\Users\per\AppData\Local\Temp\arduino\sketches\E2D807FABB134A2A60A1B9C7D14FE02B/11973.ino.bin"
usage: espota.exe [-h] [-i ESP_IP] [-I HOST_IP] [-p ESP_PORT] [-P HOST_PORT]
                  [-a AUTH] [-f FILE] [-s] [-d] [-r] [-t TIMEOUT]
espota.exe: error: unrecognized arguments: bar
Failed uploading: uploading error: exit status 2
```

This is prevented by wrapping the `--auth` flag in quotes:

```
"C:\Users\per\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.4\tools\espota.exe" \
a-r -i 192.168.254.145 \
-p 3232 "--auth=foo bar" \
-f "C:\Users\per\AppData\Local\Temp\arduino\sketches\E2D807FABB134A2A60A1B9C7D14FE02B/11973.ino.bin"
Sending invitation to 192.168.254.145
Authenticating...OK

Uploading: [                                                            ] 0%
```

Fixes the documentation. typo. volts->Volts

* fix(USB): OTG S2 and S3 debug print

ESP32-S2 and S3 using USB CDC OTG (TinyUSB) won't print any log information. This commit fixes that.

* fix(cdc): trying macos

changed Macro testing

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(sd): Fix use after free

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Added Waveshare ESP32-S3-Touch-LCD-1.69 & ESP32-S3-LCD-1.69 board

* Added Waveshare ESP32-S3-Touch-LCD-1.69 & ESP32-S3-LCD-1.69 board

* Change the default PSRAM OPI mode to disabled

* Change the default PSRAM OPI mode to Enabled

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* Correct Float type size

Correct in the data type table and the API call the size of the Preferences `Float` type and returned value for `putFloat()`.

* Update Float call prototype

* Correct Float type size

Correct Float type size in the Preferences Types table.
Revise text to use `float_t` in place of `float`.

* Correct doc build error

Correct the `Explicit markup ends without a blank line; unexpected unindent.`

* Update WebServer.ino

* Enable FAT and LittleFS filesystems as configured.
* use new versions of RequestHandler::canHandle and RequestHandler::canUpload

* Update Documentation

* Documentation changed accoring review comments.

* README.md changed accoring to review comments.

* new board esp32s3

* Update boards.txt

add circuitart_zero_s3 details

* Update pins_arduino.h

 removed unnecessary pin definitions pins_arduino.h as suggested by P-R-O-C-H-Y

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>