GitLab

* feat: backports HWCDC

* fix: statement order

* feat: Apply suggestions from code review

* Create HWCDC_Events.ino

* Create .skip.esp32

* Create .skip.esp32s2

* Delete libraries/ESP32/examples/HWSerial_Events/.skip.esp32s2

* Delete libraries/ESP32/examples/HWSerial_Events/.skip.esp32

* Delete libraries/ESP32/examples/HWSerial_Events/HWSerial_Events.ino

* Handle large octet-stream

* Add exemple Upload Huge File

* Remove unuse function printDirectory

* Fix upload path

* Simplify and generalize the body parsing.

* Adjust Update Library license

* Update Update.h

* Update Updater.cpp

* feat: backport variants from 3.0.0

* heltec update from #9367

UART0 pins are set by ROM Boot to default values. This must be reflected into Arduino HardwareSerial in order to allow it to correctly detach it and then attach it to something else.

Summary:
UART0 constructor sets default RX/TX pins as done in boot time.

* feat(uart): backports UART pin attachment from 3.0.0 to 2.0.15

* Fix (uart): Fixes additional Serial HardwareSerial errors for 2.0.14

* Update esp32-hal-uart.c

* Update HardwareSerial.h

* Apply suggestions from code review

* Fixes UartAvailableForWrite #9319

* Fixes  (set RX/TX buffer size)

(cherry picked from commit d70f57f00a8b14defadf04734501777618eacf01)

* Add support for ESP32-S3 PowerFeather

* Replace GPIO_NUM_X with just the pin number

* Pattern powerfeather entries after generic s3 board

* Remove redefinitions, add pin aliases to pins_arduino.h

* Fix and add pin definitions

Add pins D7, D8
Correct pin numbers for ALARM and EN

* Enable CDC on boot

* Use partition schemes appropriate for flash size

Also adds another partition scheme based of off default_8MB, but fat
partition.

* Add some required definitions to pins_arduino.h

* Added MotorGo Mini support

* Reverted to default USB PID

* Uncommented and corrected FlashSize menu option

* feat: adds baudrate detection to S3 and C3 using LL API for all SoC

* feat: adds the baud rate detection feature to ESP32-S3 and ESP32-C3

* Fix: fixes uartSetBaudrate() for ESP32-S3 and ESP32-C3 considering XTAL as Clock Source

* fix: Fixes ESP32 and ESP32-S2 uartGetBaudrate() with CPU Freq lower than 80MHz

* Feat: prints a warning message for detected baud rate under 9600 - S3 C3 only

* Fix: removes commentary about baud rate detection - "works for ESP32/S2 only"

* add senseBox MCU-S2

add senseBox MCU-S2 with ESP32S2

* add missing defines for 2.x

Partial fix for https://github.com/espressif/arduino-esp32/issues/7024

* refactor(on-release): improve platform.txt path replacements

Use regexs to replace all occurrences of `{runtime.platform.path}` with
the correct `{runtime.tools.*.path}`, regardless of directory separator,
and remove dependency on specific text around each path.

Note that the order has been changed to ensure that the longest paths
are replaced first, to avoid replacing parts of other paths.

* fix(platform): Windows backslash cleanups

Ensure Windows paths properly use a backslash as folder separator.

* feat(platform)!: use new Arduino Debug API

Implement sketch debugging according to the official Arduino
Platform Debug Specification [1].

The biggest improvement is that now `launch.json` can be fully
customized by the core (including the type of each entry),
so there is no need to copy files in the sketch folder.
In particular, `debug_custom.json` is not used anymore.

[1] https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-debugging-configuration

BREAKING CHANGE: This commit requires Arduino IDE 2.3.0 or later to use
the debugging features. Older versions will no longer be able to start
a debug session successfully.

* feat(debug): pass objdump path to resolve globals

Cortex-debug requires objdump to be in the same folder as gdb, or needs
the full path to the executable in the `launch.json` file. This is now
possible with the new debugging API.

On Arduino-ESP32 core versions 2.x, though, this causes a crash within
the Cortex-Debug extension as a result of loading the symbol table. This
feature is thus disabled for now.

* feat(debug): conditionally enable debug button on Nano ESP32

If the `debug.executable` variable is null or unset, the Debug button
appears grayed out. The new IDE also takes current parameters into
account, allowing to conditionally enable the Debug button only when
some conditions are met.

* Fix ESP32-Solo WDT on HTTP OTA update

* Fix ESP32-Solo WDT on HTTP OTA update

* Backport: ArduinoOTA upload intermittent failure fixed

Backport of #4657

* Fix compile error

The Arduino Platform Specification requires that the recipe hooks are
distinguished by a number and does not endorse using text labels. Fix
all the usages of recipe hooks to use numbers.

Closes arduino/arduino-cli#2369 .

Backport of #9167

* Added isKey and getType methods to the documentation (#9111)

* Removed duplicated getType documentation.

Backport of #8667

* Fixes EspClass::deepSleep(64 bits)

This will change time in microseconds from 32 bits to 64 bits as defined in IDF.

* updates function declaration

fix(adc): Always use default read resolution in __analogReadMilliVolts to obtain correct milliVolts value. (#9006)

Add new __analogReadRaw function and move code from __analogRead without mapResolution part to __analogReadRaw.

Refactor __anlogRead to use analogReadRaw (and mapResolution).

Refactor __analogReadMilliVolts to always use default read resolution when reading adc value, as expected input by esp_adc_cal_raw_to_voltage is in default resolution (means replacing all calls of __analogRead with __analogReadRaw).

* Add relative path to test script

* Use /usr/bin/env bash

* Add MatrixPortal ESP32-S3 (WIP)

* Update bootloader files, etc.

* Add MatrixPortal S3 PSRAM setup to boards.txt

* fix neopixel pin

* initialize bsp

* ?

* new variant for tft board with RGB666 40-pin display contact

* fix menu name

* fix neopixel pins

* more pin defs

* second bootloader file

* fix partition

* Update variants/adafruit_camera_esp32s3/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update variants/adafruit_qualia_s3_rgb666/pins_arduino.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* add some #'s

* hardware design mistakes? in this economy? now we can use PSRAM and SPI at the same time :)

---------
Co-authored-by: Phillip Burgess <paintyourdragon@dslextreme.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>