GitLab

Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

Migrate MD5Builder to use esp_rom functions directly rather than rely on wrappers that can be omitted from compilation based on sdkconfig. (#5941)

* add new documation GPIO
Co-authored-by: pedro.minatel <pedro.minatel@espressif.com>

- supports the WiFi/Ethernet board with WT32-S1 module and LAN8720A Ethernet PHY
- documentation available at http://www.wireless-tag.com/portfolio/wt32-eth01/

Current implementation clears _headers when request was sent. If the
user added custom request headers, they will be lost and the redirected
request will not contain them. This commit changes the scope of cleanup
so that the headers survive redirects but don't survive connection
reuse.

1.0.6 changed scanning method to always scan all available channels during connect. This results in results in connect taking about ~3 seconds instead of ~1. This patch changes the behavior to use WIFI_FAST_SCAN if client used a specific channel.

* Merged all TTGO-LoRa32 Board profiles (see #5933)

* Fix for LORA_RST (see #5966)

* [Feature] Added Sonoff DUALR3 support with RainMaker example

* [Feature] Added skip files for C3 and S2

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>

fix boad error : "--elf-gcc.path}/bin/--elf-g++": file does not exist
and fix follow esp32 dev module

(latest) version.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>

- Remove the execute bit from source and text files.
- on-pages.sh script needs the execute bit to be set.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>

All the workflows are now migrated to Github Actions.
Update the on-push.sh script to remove references to TravisCI variables.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>

also update tinyuf2 bootloader for adafruit boards to 0.6.2

* Editing esp-idf_component docs

* Changed idt to ESP-IDF
Co-authored-by: Pedro Minatel <pminatel@gmail.com>

esp-dsp: master 6b25cbb
esp-face: master 859f32a
esp-rainmaker: f1b82c7
esp32-camera: master 61400bc
esp_littlefs: master 3c29afc

It was found that when I2C device is holding the clock LOW, ESP32 master is failing to wait for the clock to be released.

Fixes: #5875
Fixes: sparkfun/SparkFun_u-blox_GNSS_Arduino_Library#77

changes "private" vars to "protected" so that descendants are allowed to access them.

* [Docs] Added the supported SoC table link on the README file

* [Docs] Added the ESP32-S3 datasheet link to the getting started page

I misplaced the additions.

Summary

Only affects ETH (not WiFi)

This PR solves #5733 by allowing the DHCP IDF server to complete its tasks and only then it sets a static IP.
This also solves another related failure reported in this issue (#5733 (comment)).

fix #5733

Impact

Adds a delay in order to wait for DHCP to actually terminate before setting the static IP configuration in ETH.

* Re-add with clean master

* Address @me-no-dev's comments

* static_cast<size_t> to static_cast<uint8_t>

Added an option for using precompiled libraries.

Empty if there is no precompilation.

```
compiler.libraries.ldflags=
```

Compiler Message when there is precompilation.

```
Compiling libraries...
Compiling library "aquestalk-esp32"
Library aquestalk-esp32 has been declared precompiled:
Using precompiled library in C:\Users\tanaka\Documents\Arduino\libraries\aquestalk-esp32\src\esp32
```

The precompiler cannot be used because it is not set up now.

* [FEATURE]  ARDUINO_PARTITION_xxx build flag

Proposition: adding `-DARDUINO_PARTITION_{build.partitions}` flag to make the build partition information available at compile time.

Use cas example:

```C
#if defined ARDUINO_PARTITION_default
  // prevent compilation
  #error "This sketch needs 'Minimal SPIFFS' partition scheme to compile" 
  // or disable sketch features that need flash space
  #define USE_HUGE_BITMAP_IMAGES false
#endif
```

* Adding -DARDUINO_PARTITION_{build.partitions} (see #5804)

Fixes: https://github.com/espressif/arduino-esp32/issues/5818

When using the FTM examples I got an error in the FTM_Initiator.ino:

*"wifi:channel=0 is invalid"*

I solved it for myself by simply passing the channel argument to be 1 in *WiFi.initiateFTM*. However, a better fix would be to directly change the default channel here.

* examples: WiFi and Ethernet examples organization

* examples: Change on CI scripts to include new folder

* Library name reverted to WiFi

* examples: WiFi and Ethernet examples organization in a new folder

* examples: Eth files moved from WiFi to Ethernet lib and CMakeLists updated

* Added I2C driver docs
docs: Changes on the images and added more details about the I2C slave

* docs: Added slaveWrite description and added docs build folder to the gitignore file