GitLab

Signed-off-by: Damien George <damien@micropython.org>

The metadata can be version, description, and license.

After executing a manifest, the top-level metadata can be queried, and also
each file output from the manifest will have the metadata of the
containing manifest.

Use the version metadata to "tag" files before freezing such that they have
__version__ available.

By default, don't include micropython-lib/unix-ffi in the search.

If unix_ffi=True is passed to require(), then include unix-ffi and make it
take precedence over the other locations (e.g. python-stdlib).

This does two things:
 - Prevents non-unix builds from using unix-only packages.
 - Allows the unix build to optionally use a more full-featured (e.g. ffi)
   based package, even with the same name as one from e.g. stdlib.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

If an include path is a directory, then it implicitly grabs the manifest.py
file inside that directory. This simplifies most manifest.py files.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Rather than invoking mpy-cross directly via system/subprocess in our build
tools and other tools, this provides a Python interface for it.

Based on https://gitlab.com/alelec/mpy_cross (with the intention of
eventually replacing that as the "official" pypi distribution once setup.py
etc are added).
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

This splits the manifest file loading logic from makemanifest.py and
updates makemanifest.py to use it.

This will allow non-freezing uses of manifests, such as defining packages
and dependencies in micropython-lib.

Also adds additional methods to the manifest "API":
 - require() - to get a package from micropython-lib.
 - module() - to define a single-file module
 - package() - to define a multi-file package

module() and package() should replace most uses of freeze() and can also
be also used in non-freezing scenarios.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

micropython-lib is now a submodule, and the manifest compilation process
will ensure it is available, so manifests no longer need to check that it
is available.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Avoiding a watchdog reset during i2c.scan() if the hardware is not properly
set up (eg on esp8266), and also allowing to stop the scan with a
KeyboardInterrupt.

Fixes issue #8876.

Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>

Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>

Changes are:
- Support drive= keyword argument.
- Fix trigger keyword check.
- Fix GPIO pin setting.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>

uart.flush()

flush() will wait until all characters have been sent.
To avoid a permanent lock, a timeout applies depending on the
size of FIFO and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress.
ret is False otherwise.

Since uart.write() of the nrf port waits until all bytes but the last
one have been sent, uart.flush() and uart.txdone() are implemented
as empty functions to provide API consistency.

uart.flush()

flush() will always return immediately, even if the last byte
may still be sent.

ret = uart.txdone()

uart.txdone() will always return True, even if the last byte
may still be sent.

Since uart.write() of the STM32 port waits until all bytes have
been sent, uart.flush() and uart.txdone() are implemented as empty
functions to provide API consistency.

uart.flush()

flush() will always return immediately.

ret = uart.txdone()

uart.txdone() will always return True.

uart.flush()

flush() will wait until all characters but the last one have been sent.
It returns while the last character is sent. If needed, the calling
code has to add one character wait time. To avoid a permanent lock,
a timeout applies depending on the size of the FIFO and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress. It returns already True when
the last byte of a transfer is sent.
ret is False otherwise.

uart.flush()

flush() will wait until all characters have been sent.To avoid a
permanent lock, a timeout applies depending on the size of txbuf
and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress.
ret is False otherwise.

uart.flush()

flush() will wait until all characters have been sent.To
avoid a permanent lock, a timeout applies depending on the
size of txbuf and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress.
ret is False otherwise.

uart.flush()

flush() will wait until all characters have been sent. It may return
while the last character is sent. if needed, the calling code has to
add one character wait time. To avoid a permanent lock, a timeout
applies depending on the size of txbuf and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress. It may return True if the
last byte of a transfer is sent.
ret is False otherwise.

Quite regularly users complain about unexpected behavior of I2C, calling it
a bug, when in fact the trouble is caused by missing pull-up resistors.  So
this commit adds a note to the documentation, in the slim hope that people
will find and read it.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>

Changes are:
- Remove unix- and stm32-specific sections (move unix to its own
  README.md), stm32 was duplicated.
- Add links to GitHub Discussions and Discord.
- Update information about the project.
- Add a getting started section.
- Explain `make submodules`.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>

So that everything is reset and the SD card can be created again after
calling SDCard.deinit() (and after a soft reset).

Fixes issue #8949.
Signed-off-by: Damien George <damien@micropython.org>

Having two separate manifests is confusing.  It's simpler to have the daily
builds use the same configuration as the stable, release builds.
Signed-off-by: Damien George <damien@micropython.org>

There don't seem to be many changes going from v2.1.2 to v2.1.3 of lwIP.
Mostly they are:
- IPv6 fixes and improvements
- changes to apps and other code that MicroPython doesn't use
- comments and tests
- minor bug fixes

In particular there doesn't look to be any change to the API of any
function used by MicroPython.

Network multi tests pass on PYBD_SF2 and PYBD_SF6.  PYBD_SF2, PYBD_SF6 and
PICO_W have unchanged iperf3 performance.  Similar results for networking
on the mimxrt port.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

All uses of this are either tiny strings or not-known-to-be-safe.

Update comments for mp_obj_new_str_copy and mp_obj_new_str_of_type.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

The new `mp_obj_new_str_from_utf8_vstr` can be used when you know you
already have a unicode-safe string.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Now that we have `mp_obj_new_str_type_from_vstr` (private helper used by
objstr.c) split from the public API (`mp_obj_new_str_from_vstr`), we can
enforce a unicode check at the public API without incurring a performance
cost on the various objstr.c methods (which are already working on known
unicode-safe strings).
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

The existing non-Docker instructions are basically impossible to follow
because the esp-open-sdk does not compile.  Update these instructions to
use the exact toolchain that our CI uses.

Also split the Docker from non-Docker instructions, to avoid confusion
about which commands need to be prefixed.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Signed-off-by: Laurens Valk <laurens@pybricks.com>

These can't be nested, so apply styling separately.
Signed-off-by: Laurens Valk <laurens@pybricks.com>

* `init()` can be called multiple times to reconfigure UART.
* After `deinit()` it is impossible to call `init()` again.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>

Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>

Updated some of the CPython feature differences:
- Updated status of some features.
- Added CSS to fix table widths to 100% and word wrap.
- Specified explicit table column ratios to improve layout appearance.
- Added missing references to anchors.
- Better consistency with use of formatting and case.