GitLab

Using the new tools/verifygitlog.py script.

The main rules enforced are:
- At most 72 characters in the subject line, with a ": " in it.
- At most 75 characters per line in the body.
- No "noreply" email addresses.

This was added a long time ago in 75abee20
when USB host support was added to the stm (now stm32) port, and when this
pyexec code was actually part of the stm port.  It's unlikely to work as
intended anymore.  If it is needed in the future then generic hook macros
can be added in pyexec.

It practically does the same as qstr_from_str and was only used in one
place, which should actually use the compile-time MP_QSTR_XXX form for
consistency; qstr_from_str is for runtime strings only.

If the _IRQ_L2CAP_RECV handler does the actual consumption of the incoming
data (i.e. via l2cap_recvinto), rather than setting a flag for
non-scheduler-context to handle it later, then two things can happen:

- It can starve the VM (i.e. the scheduled task never terminates).  This is
  because calling l2cap_recvinto will empty the rx buffer, which will grant
  more credits to the channel (an HCI command), meaning more data can
  arrive.  This means that the loop in hal_uart.c that keeps reading HCI
  data from the uart and executing NimBLE events as they are created will
  not terminate, preventing other VM code from running.

- There's no flow control (i.e. data will arrive too quickly).  The channel
  shouldn't be given credits until after we return from scheduler context.

It's preferable that no work is done in scheduler/IRQ context.  But to
prevent this being a problem this commit changes l2cap_recvinto so that if
it is called in IRQ context, and the Python handler empties the rx buffer,
then don't grant credits until the Python handler is complete.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Don't clear the IPCC channel flag until we've actually handled the incoming
data, or else the wireless firmware may clobber the IPCC buffer if more
data arrives.  This requires masking the IRQ until the data is handled.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Signed-off-by: Damien George <damien@micropython.org>

This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040
microcontroller.

The build system uses pure cmake (with a small Makefile wrapper for
convenience).  The USB driver is TinyUSB, and there is a machine module
with most of the standard classes implemented.  Some examples are provided
in the examples/rp2/ directory.

Work done in collaboration with Graham Sanderson.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

The pin is configured in open-drain mode so these od_high/od_low methods
should be used.
Signed-off-by: Damien George <damien@micropython.org>

These args are already bounds checked and clipped, and using unsigned ints
can be more efficient.  It also eliminates possible issues and compiler
warnings with shifting of signed integers.
Signed-off-by: Damien George <damien@micropython.org>

Dates/times must be post 2000/1/1 to work correctly with these simple
implementations.
Signed-off-by: Damien George <damien@micropython.org>

So there are no references to undeclared asm_thumb_mov_reg_i16().
Signed-off-by: Damien George <damien@micropython.org>

And make it generic so it can be run on any target.
Signed-off-by: Damien George <damien@micropython.org>

Based on change made by Graham Sanderson.
Signed-off-by: Damien George <damien@micropython.org>

Adds a new compile-time option MICROPY_EMIT_THUMB_ARMV7M which is enabled
by default (to get existing behaviour) and which should be disabled (set to
0) when building native emitter support (@micropython.native) on ARMv6M
targets.

Signed-off-by: Damien George <damien@micropython.org>

This returns a reference to the globals dict associated with the function,
ie the global scope that the function was defined in.  This attribute is
read-only but the dict itself is modifiable, per CPython behaviour.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

It's enabled by default to retain the existing behaviour.  A board can
disable this option if it manages mounting the filesystem itself, for
example in frozen code.
Signed-off-by: Damien George <damien@micropython.org>

Changes are:
- refactor to use new _create_element function
- support extended version of MOUNT element with block size
- support STATUS element
Signed-off-by: Damien George <damien@micropython.org>

So that a failed update via fsload can be more easily diagnosed.
Signed-off-by: Damien George <damien@micropython.org>

This new element takes the form: (ELEM_TYPE_STATUS, 4, <address>).  If this
element is present in the mboot command then mboot will store to the given
address the result of the filesystem firmware update process.  The address
can for example be an RTC backup register.
Signed-off-by: Damien George <damien@micropython.org>

Instead it is now passed in as an optional parameter to the ELEM_MOUNT
element, with a compile-time configurable default.
Signed-off-by: Damien George <damien@micropython.org>

The superblock for littlefs is in block 0 and 1, but block 0 may be erased
or partially written, so block 1 must be checked if block 0 does not have a
valid littlefs superblock in it.

Prior to this commit, if block 0 did not contain a valid littlefs
superblock (but block 1 did) then the auto-detection would fail, mounting a
FAT filesystem would also fail, and the system would reformat the flash,
even though it may have contained a valid littlefs filesystem.  This is now
fixed.
Signed-off-by: Damien George <damien@micropython.org>

The superblock for littlefs is in block 0 and 1, but block 0 may be erased
or partially written, so block 1 must be checked if block 0 does not have a
valid littlefs superblock in it.

Prior to this commit, the mount of a block device which auto-detected the
filysystem type would fail for littlefs if block 0 did not contain a valid
superblock.  That is now fixed.
Signed-off-by: Damien George <damien@micropython.org>

This commit adds many new sections to the existing "Developing and building
MicroPython" chapter to make it all about the internals of MicroPython.

This work was done as part of Google's Season of Docs 2020.

It's not necessary to fetch all branches.
Signed-off-by: Damien George <damien@micropython.org>

Changes are:
- Use ubuntu-20.04 so that gcc-multilib installs without error.
- Use "fetch-depth: 100" to get history prior to pull request.
Signed-off-by: Damien George <damien@micropython.org>

* Fix a typo in the Makefile that prevented the debug build to be actually
  enabled when BTYPE=debug is used.

* Add a missing header in modmachine.c that is used when a debug build is
  created.

This commit improves some FTP implementation details for better
compatibility with FTP clients:

* The PWD command now puts quotes around the directory name before
  returning it.  This fixes BBEdit’s FTP client, which performs a PWD after
  each CWD and gets confused if the returned directory path is not
  surrounded by quotes.

* The FEAT command is now allowed before logging in. This fixes the lftp
  client, which send FEAT first and gets confused (tries to use TLS) if the
  server responds with 332.

With MICROPY_FLOAT_IMPL_FLOAT the results of utime.time(), gmtime() and
localtime() change only every 129 seconds.  As one consequence
tests/extmod/vfs_lfs_mtime.py will fail on a unix port with LFS support.

With this patch these functions only return floats if
MICROPY_FLOAT_IMPL_DOUBLE is used.  Otherwise they return integers.

According to documentation time() has a precision of at least 1 second.
This test runs for 2.5 seconds and calls all utime functions every 100ms.
Then it checks if they returned enough different results.  All functions
with sub-second precision will return ~25 results.  This test passes with
15 results or more.  Functions that do not exist are skipped silently.

Currently supports only polling read and write.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>

This allows sending arbitrary HCI commands and getting the response.  The
return value of the function is the status of the command.

This is intended for debugging and not to be a part of the public API, and
must be enabled via mpconfigboard.h.  It's currently only implemented for
NimBLE bindings.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

To match the definition of GENERATE_PACK_DFU, so a board can customise the
location/name of this file if needed.
Signed-off-by: Damien George <damien@micropython.org>

Signed-off-by: Damien George <damien@micropython.org>

To have at least one board configured with MBOOT_ENABLE_PACKING, for CI
testing purposes and demonstration of the feature.
Signed-off-by: Damien George <damien@micropython.org>