Skip to content

GitLab

M
micropython
Commit d49a5470 authored by Tobias Badertscher's avatar Tobias Badertscher Committed by Damien George
Browse files
Options

stmhal: L4: Modify adc.c to add support for STM32L4 series.

parent 69f26c68
Hide whitespace changes
Inline Side-by-side
Showing with 91 additions and 17 deletions
stmhal/adc.c
View file @ d49a5470
......@@ -65,6 +65,8 @@
defined(STM32F437xx) || defined(STM32F439xx) || \
defined(STM32F746xx)
#define VBAT_DIV (4)
#elif defined(STM32L476xx)
#define VBAT_DIV (3)
#else
#error Unsupported processor
#endif
......@@ -80,8 +82,45 @@ typedef struct _pyb_obj_adc_t {
ADC_HandleTypeDef handle;
} pyb_obj_adc_t;
STATIC bool is_adcx_channel(int channel) {
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
return IS_ADC_CHANNEL(channel);
#elif defined(MCU_SERIES_L4)
ADC_HandleTypeDef handle;
handle.Instance = ADCx;
return IS_ADC_CHANNEL(&handle, channel);
#else
#error Unsupported processor
#endif
}
STATIC void adc_wait_for_eoc_or_timeout(int32_t timeout) {
uint32_t tickstart = HAL_GetTick();
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
while ((ADCx->SR & ADC_FLAG_EOC) != ADC_FLAG_EOC) {
#elif defined(MCU_SERIES_L4)
while (READ_BIT(ADCx->ISR, ADC_FLAG_EOC) != ADC_FLAG_EOC) {
#else
#error Unsupported processor
#endif
if (((HAL_GetTick() - tickstart ) > timeout)) {
break; // timeout
}
}
}
STATIC void adcx_clock_enable(void) {
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
ADCx_CLK_ENABLE();
#elif defined(MCU_SERIES_L4)
__HAL_RCC_ADC_CLK_ENABLE();
#else
#error Unsupported processor
#endif
}
STATIC void adc_init_single(pyb_obj_adc_t *adc_obj) {
if (!IS_ADC_CHANNEL(adc_obj->channel)) {
if (!is_adcx_channel(adc_obj->channel)) {
return;
}
......@@ -97,22 +136,33 @@ STATIC void adc_init_single(pyb_obj_adc_t *adc_obj) {
HAL_GPIO_Init(pin->gpio, &GPIO_InitStructure);
}
ADCx_CLK_ENABLE();
adcx_clock_enable();
ADC_HandleTypeDef *adcHandle = &adc_obj->handle;
adcHandle->Instance = ADCx;
adcHandle->Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
adcHandle->Init.Resolution = ADC_RESOLUTION12b;
adcHandle->Init.ScanConvMode = DISABLE;
adcHandle->Init.ContinuousConvMode = DISABLE;
adcHandle->Init.DiscontinuousConvMode = DISABLE;
adcHandle->Init.NbrOfDiscConversion = 0;
adcHandle->Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
adcHandle->Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
adcHandle->Init.DataAlign = ADC_DATAALIGN_RIGHT;
adcHandle->Init.NbrOfConversion = 1;
adcHandle->Init.DMAContinuousRequests = DISABLE;
adcHandle->Init.EOCSelection = DISABLE;
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
adcHandle->Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
adcHandle->Init.ScanConvMode = DISABLE;
adcHandle->Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
#elif defined(MCU_SERIES_L4)
adcHandle->Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV2;
adcHandle->Init.ScanConvMode = ADC_SCAN_DISABLE;
adcHandle->Init.ExternalTrigConv = ADC_EXTERNALTRIG_T1_CC1;
adcHandle->Init.LowPowerAutoWait = DISABLE;
adcHandle->Init.Overrun = ADC_OVR_DATA_PRESERVED;
adcHandle->Init.OversamplingMode = DISABLE;
#else
#error Unsupported processor
#endif
HAL_ADC_Init(adcHandle);
}
......@@ -122,7 +172,13 @@ STATIC void adc_config_channel(pyb_obj_adc_t *adc_obj) {
sConfig.Channel = adc_obj->channel;
sConfig.Rank = 1;
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
#elif defined(MCU_SERIES_L4)
sConfig.SamplingTime = ADC_SAMPLETIME_12CYCLES_5;
#else
#error Unsupported processor
#endif
sConfig.Offset = 0;
HAL_ADC_ConfigChannel(&adc_obj->handle, &sConfig);
......@@ -173,7 +229,7 @@ STATIC mp_obj_t adc_make_new(const mp_obj_type_t *type, mp_uint_t n_args, mp_uin
channel = pin->adc_channel;
}
if (!IS_ADC_CHANNEL(channel)) {
if (!is_adcx_channel(channel)) {
nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "not a valid ADC Channel: %d", channel));
}
if (pin_adc1[channel] == NULL) {
......@@ -274,17 +330,18 @@ STATIC mp_obj_t adc_read_timed(mp_obj_t self_in, mp_obj_t buf_in, mp_obj_t freq_
HAL_ADC_Start(&self->handle);
} else {
// for subsequent samples we can just set the "start sample" bit
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART;
#elif defined(MCU_SERIES_L4)
SET_BIT(ADCx->CR, ADC_CR_ADSTART);
#else
#error Unsupported processor
#endif
}
// wait for sample to complete
uint32_t tickstart = HAL_GetTick();
while ((ADCx->SR & ADC_FLAG_EOC) != ADC_FLAG_EOC) {
#define READ_TIMED_TIMEOUT (10) // in ms
if (((HAL_GetTick() - tickstart ) > READ_TIMED_TIMEOUT)) {
break; // timeout
}
}
#define READ_TIMED_TIMEOUT (10) // in ms
adc_wait_for_eoc_or_timeout(READ_TIMED_TIMEOUT);
// read value
uint value = ADCx->DR;
......@@ -357,22 +414,33 @@ void adc_init_all(pyb_adc_all_obj_t *adc_all, uint32_t resolution) {
HAL_GPIO_Init(pin->gpio, &GPIO_InitStructure);
}
ADCx_CLK_ENABLE();
adcx_clock_enable();
ADC_HandleTypeDef *adcHandle = &adc_all->handle;
adcHandle->Instance = ADCx;
adcHandle->Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
adcHandle->Init.Resolution = resolution;
adcHandle->Init.ScanConvMode = DISABLE;
adcHandle->Init.ContinuousConvMode = DISABLE;
adcHandle->Init.DiscontinuousConvMode = DISABLE;
adcHandle->Init.NbrOfDiscConversion = 0;
adcHandle->Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
adcHandle->Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
adcHandle->Init.DataAlign = ADC_DATAALIGN_RIGHT;
adcHandle->Init.NbrOfConversion = 1;
adcHandle->Init.DMAContinuousRequests = DISABLE;
adcHandle->Init.EOCSelection = DISABLE;
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
adcHandle->Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
adcHandle->Init.ScanConvMode = DISABLE;
adcHandle->Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
#elif defined(MCU_SERIES_L4)
adcHandle->Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV2;
adcHandle->Init.ScanConvMode = ADC_SCAN_DISABLE;
adcHandle->Init.ExternalTrigConv = ADC_EXTERNALTRIG_T1_CC1;
adcHandle->Init.LowPowerAutoWait = DISABLE;
adcHandle->Init.Overrun = ADC_OVR_DATA_PRESERVED;
adcHandle->Init.OversamplingMode = DISABLE;
#else
#error Unsupported processor
#endif
HAL_ADC_Init(adcHandle);
}
......@@ -381,7 +449,13 @@ uint32_t adc_config_and_read_channel(ADC_HandleTypeDef *adcHandle, uint32_t chan
ADC_ChannelConfTypeDef sConfig;
sConfig.Channel = channel;
sConfig.Rank = 1;
#if defined(MCU_SERIES_F4) || defined(MCU_SERIES_F7)
sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
#elif defined(MCU_SERIES_L4)
sConfig.SamplingTime = ADC_SAMPLETIME_12CYCLES_5;
#else
#error Unsupported processor
#endif
sConfig.Offset = 0;
HAL_ADC_ConfigChannel(adcHandle, &sConfig);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment