ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.

For consistency with other board-level config macros that begin with
MICROPY_HW_USB.

Also allow boards in the mimxrt, nrf and samd ports to configure these
values.
Signed-off-by: Damien George <damien@micropython.org>

ports/mimxrt/tusb_port.c

@@ -26,8 +26,10 @@
 
 #include "tusb.h"
 
-#define USBD_VID (0xf055)
-#define USBD_PID (0x9802)
+#ifndef MICROPY_HW_USB_VID
+#define MICROPY_HW_USB_VID (0xf055)
+#define MICROPY_HW_USB_PID (0x9802)
+#endif
 
 #define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
 #define USBD_MAX_POWER_MA (250)
@@ -57,8 +59,8 @@ static const tusb_desc_device_t usbd_desc_device = {
     .bDeviceSubClass = MISC_SUBCLASS_COMMON,
     .bDeviceProtocol = MISC_PROTOCOL_IAD,
     .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
-    .idVendor = USBD_VID,
-    .idProduct = USBD_PID,
+    .idVendor = MICROPY_HW_USB_VID,
+    .idProduct = MICROPY_HW_USB_PID,
     .bcdDevice = 0x0100,
     .iManufacturer = USBD_STR_MANUF,
     .iProduct = USBD_STR_PRODUCT,

ports/nrf/drivers/usb/usb_descriptors.c

@@ -26,8 +26,10 @@
 
 #include "tusb.h"
 
-#define USBD_VID (0xf055)
-#define USBD_PID (0x9802)
+#ifndef MICROPY_HW_USB_VID
+#define MICROPY_HW_USB_VID (0xf055)
+#define MICROPY_HW_USB_PID (0x9802)
+#endif
 
 #define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
 #define USBD_MAX_POWER_MA (250)
@@ -57,8 +59,8 @@ static const tusb_desc_device_t usbd_desc_device = {
     .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
     .bDeviceProtocol    = MISC_PROTOCOL_IAD,
     .bMaxPacketSize0    = CFG_TUD_ENDOINT0_SIZE,
-    .idVendor           = USBD_VID,
-    .idProduct          = USBD_PID,
+    .idVendor           = MICROPY_HW_USB_VID,
+    .idProduct          = MICROPY_HW_USB_PID,
     .bcdDevice          = 0x0100,
     .iManufacturer      = USBD_STR_MANUF,
     .iProduct           = USBD_STR_PRODUCT,

ports/samd/tusb_port.c

@@ -27,8 +27,10 @@
 #include "samd_soc.h"
 #include "tusb.h"
 
-#define USBD_VID (0xf055)
-#define USBD_PID (0x9802)
+#ifndef MICROPY_HW_USB_VID
+#define MICROPY_HW_USB_VID (0xf055)
+#define MICROPY_HW_USB_PID (0x9802)
+#endif
 
 #define USBD_DESC_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)
 #define USBD_MAX_POWER_MA (250)
@@ -58,8 +60,8 @@ static const tusb_desc_device_t usbd_desc_device = {
     .bDeviceSubClass = MISC_SUBCLASS_COMMON,
     .bDeviceProtocol = MISC_PROTOCOL_IAD,
     .bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
-    .idVendor = USBD_VID,
-    .idProduct = USBD_PID,
+    .idVendor = MICROPY_HW_USB_VID,
+    .idProduct = MICROPY_HW_USB_PID,
     .bcdDevice = 0x0100,
     .iManufacturer = USBD_STR_MANUF,
     .iProduct = USBD_STR_PRODUCT,

ports/stm32/Makefile

@@ -725,7 +725,7 @@ GEN_PINS_AF_PY = $(BUILD)/pins_af.py
 INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
 FILE2H = $(TOP)/tools/file2h.py
 
-USB_IDS_FILE = usb.h
+USB_IDS_FILE = mpconfigboard_common.h
 CDCINF_TEMPLATE = pybcdc.inf_template
 GEN_CDCINF_FILE = $(HEADER_BUILD)/pybcdc.inf
 GEN_CDCINF_HEADER = $(HEADER_BUILD)/pybcdc_inf.h

ports/stm32/main.c

@@ -582,13 +582,13 @@ soft_reset:
     // init USB device to default setting if it was not already configured
     if (!(pyb_usb_flags & PYB_USB_FLAG_USB_MODE_CALLED)) {
         #if MICROPY_HW_USB_MSC
-        const uint16_t pid = USBD_PID_CDC_MSC;
+        const uint16_t pid = MICROPY_HW_USB_PID_CDC_MSC;
         const uint8_t mode = USBD_MODE_CDC_MSC;
         #else
-        const uint16_t pid = USBD_PID_CDC;
+        const uint16_t pid = MICROPY_HW_USB_PID_CDC;
         const uint8_t mode = USBD_MODE_CDC;
         #endif
-        pyb_usb_dev_init(pyb_usb_dev_detect(), USBD_VID, pid, mode, 0, NULL, NULL);
+        pyb_usb_dev_init(pyb_usb_dev_detect(), MICROPY_HW_USB_VID, pid, mode, 0, NULL, NULL);
     }
     #endif
 

ports/stm32/mpconfigboard_common.h

@@ -177,6 +177,33 @@
 #define MICROPY_HW_UART_IS_RESERVED(uart_id) (false)
 #endif
 
+/*****************************************************************************/
+// USB configuration
+
+// The USBD_xxx VID/PID macros have been renamed to MICROPY_HW_USB_xxx.
+#ifdef USBD_VID
+#error "Old USBD_VID configuration option used"
+#endif
+
+// Default VID and PID values to use for the USB device.  If MICROPY_HW_USB_VID
+// is defined by a board then all needed PID options must also be defined.  The
+// VID and PID can also be set dynamically in pyb.usb_mode().
+// Windows needs a different PID to distinguish different device configurations.
+#ifndef MICROPY_HW_USB_VID
+#define MICROPY_HW_USB_VID              (0xf055)
+#define MICROPY_HW_USB_PID_CDC_MSC      (0x9800)
+#define MICROPY_HW_USB_PID_CDC_HID      (0x9801)
+#define MICROPY_HW_USB_PID_CDC          (0x9802)
+#define MICROPY_HW_USB_PID_MSC          (0x9803)
+#define MICROPY_HW_USB_PID_CDC2_MSC     (0x9804)
+#define MICROPY_HW_USB_PID_CDC2         (0x9805)
+#define MICROPY_HW_USB_PID_CDC3         (0x9806)
+#define MICROPY_HW_USB_PID_CDC3_MSC     (0x9807)
+#define MICROPY_HW_USB_PID_CDC_MSC_HID  (0x9808)
+#define MICROPY_HW_USB_PID_CDC2_MSC_HID (0x9809)
+#define MICROPY_HW_USB_PID_CDC3_MSC_HID (0x980a)
+#endif
+
 /*****************************************************************************/
 // General configuration
 

ports/stm32/usb.c

@@ -412,7 +412,7 @@ STATIC mp_obj_t pyb_usb_mode(size_t n_args, const mp_obj_t *pos_args, mp_map_t *
     static const mp_arg_t allowed_args[] = {
         { MP_QSTR_mode, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_NONE} },
         { MP_QSTR_port, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
-        { MP_QSTR_vid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = USBD_VID} },
+        { MP_QSTR_vid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = MICROPY_HW_USB_VID} },
         { MP_QSTR_pid, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
         #if MICROPY_HW_USB_MSC
         { MP_QSTR_msc, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_PTR(&mp_const_empty_tuple_obj)} },
@@ -489,61 +489,61 @@ STATIC mp_obj_t pyb_usb_mode(size_t n_args, const mp_obj_t *pos_args, mp_map_t *
     uint8_t mode;
     if (strcmp(mode_str, "CDC+MSC") == 0 || strcmp(mode_str, "VCP+MSC") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC_MSC;
+            pid = MICROPY_HW_USB_PID_CDC_MSC;
         }
         mode = USBD_MODE_CDC_MSC;
     } else if (strcmp(mode_str, "VCP+MSC+HID") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC_MSC_HID;
+            pid = MICROPY_HW_USB_PID_CDC_MSC_HID;
         }
         mode = USBD_MODE_CDC_MSC_HID;
     #if MICROPY_HW_USB_CDC_NUM >= 2
     } else if (strcmp(mode_str, "VCP+VCP") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC2;
+            pid = MICROPY_HW_USB_PID_CDC2;
         }
         mode = USBD_MODE_CDC2;
     } else if (strcmp(mode_str, "VCP+VCP+MSC") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC2_MSC;
+            pid = MICROPY_HW_USB_PID_CDC2_MSC;
         }
         mode = USBD_MODE_CDC2_MSC;
     } else if (strcmp(mode_str, "2xVCP+MSC+HID") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC2_MSC_HID;
+            pid = MICROPY_HW_USB_PID_CDC2_MSC_HID;
         }
         mode = USBD_MODE_CDC2_MSC_HID;
     #endif
     #if MICROPY_HW_USB_CDC_NUM >= 3
     } else if (strcmp(mode_str, "3xVCP") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC3;
+            pid = MICROPY_HW_USB_PID_CDC3;
         }
         mode = USBD_MODE_CDC3;
     } else if (strcmp(mode_str, "3xVCP+MSC") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC3_MSC;
+            pid = MICROPY_HW_USB_PID_CDC3_MSC;
         }
         mode = USBD_MODE_CDC3_MSC;
     } else if (strcmp(mode_str, "3xVCP+MSC+HID") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC3_MSC_HID;
+            pid = MICROPY_HW_USB_PID_CDC3_MSC_HID;
         }
         mode = USBD_MODE_CDC3_MSC_HID;
     #endif
     } else if (strcmp(mode_str, "CDC+HID") == 0 || strcmp(mode_str, "VCP+HID") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC_HID;
+            pid = MICROPY_HW_USB_PID_CDC_HID;
         }
         mode = USBD_MODE_CDC_HID;
     } else if (strcmp(mode_str, "CDC") == 0 || strcmp(mode_str, "VCP") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_CDC;
+            pid = MICROPY_HW_USB_PID_CDC;
         }
         mode = USBD_MODE_CDC;
     } else if (strcmp(mode_str, "MSC") == 0) {
         if (pid == -1) {
-            pid = USBD_PID_MSC;
+            pid = MICROPY_HW_USB_PID_MSC;
         }
         mode = USBD_MODE_MSC;
     } else {

ports/stm32/usb.h

@@ -30,22 +30,6 @@
 
 #define PYB_USB_FLAG_USB_MODE_CALLED    (0x0002)
 
-#ifndef USBD_VID
-// Windows needs a different PID to distinguish different device configurations
-#define USBD_VID         (0xf055)
-#define USBD_PID_CDC_MSC (0x9800)
-#define USBD_PID_CDC_HID (0x9801)
-#define USBD_PID_CDC     (0x9802)
-#define USBD_PID_MSC     (0x9803)
-#define USBD_PID_CDC2_MSC (0x9804)
-#define USBD_PID_CDC2    (0x9805)
-#define USBD_PID_CDC3    (0x9806)
-#define USBD_PID_CDC3_MSC (0x9807)
-#define USBD_PID_CDC_MSC_HID (0x9808)
-#define USBD_PID_CDC2_MSC_HID (0x9809)
-#define USBD_PID_CDC3_MSC_HID (0x980a)
-#endif
-
 typedef enum {
     PYB_USB_STORAGE_MEDIUM_NONE = 0,
     PYB_USB_STORAGE_MEDIUM_FLASH,

tools/insert-usb-ids.py

@@ -8,6 +8,7 @@ import sys
 import re
 import string
 
+config_prefix = "MICROPY_HW_USB_"
 needed_keys = ("USB_PID_CDC_MSC", "USB_PID_CDC_HID", "USB_PID_CDC", "USB_VID")
 
 
@@ -16,10 +17,10 @@ def parse_usb_ids(filename):
     for line in open(filename).readlines():
         line = line.rstrip("\r\n")
         match = re.match("^#define\s+(\w+)\s+\(0x([0-9A-Fa-f]+)\)$", line)
-        if match and match.group(1).startswith("USBD_"):
-            key = match.group(1).replace("USBD", "USB")
+        if match and match.group(1).startswith(config_prefix):
+            key = match.group(1).replace(config_prefix, "USB_")
             val = match.group(2)
-            print("key =", key, "val =", val)
+            # print("key =", key, "val =", val)
             if key in needed_keys:
                 rv[key] = val
     for k in needed_keys: