Commit 8e130fcf authored by Damien George's avatar Damien George

esp8266/modpybpin: Make pin.irq() methods take keyword args.

parent 8a3e9036
......@@ -308,23 +308,30 @@ STATIC mp_obj_t pyb_pin_high(mp_obj_t self_in) {
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_pin_high_obj, pyb_pin_high);
// pin.irq()
STATIC mp_obj_t pyb_pin_irq(size_t n_args, const mp_obj_t *args) {
pyb_pin_obj_t *self = MP_OBJ_TO_PTR(args[0]);
// pin.irq(*, trigger, handler=None)
STATIC mp_obj_t pyb_pin_irq(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
enum { ARG_trigger, ARG_handler };
static const mp_arg_t allowed_args[] = {
{ MP_QSTR_trigger, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
{ MP_QSTR_handler, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
};
pyb_pin_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]);
mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
if (self->phys_port >= 16) {
nlr_raise(mp_obj_new_exception_msg(&mp_type_OSError, "pin does not have IRQ capabilities"));
}
if (n_args > 1) {
if (args[ARG_trigger].u_int != 0) {
// configure irq
int trig = mp_obj_get_int(args[1]);
mp_obj_t handler = args[2];
mp_obj_t handler = args[ARG_handler].u_obj;
if (handler == mp_const_none) {
handler = MP_OBJ_NULL;
}
ETS_GPIO_INTR_DISABLE();
MP_STATE_PORT(pin_irq_handler)[self->phys_port] = handler;
SET_TRIGGER(self->phys_port, trig);
SET_TRIGGER(self->phys_port, args[ARG_trigger].u_int);
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, 1 << self->phys_port);
ETS_GPIO_INTR_ENABLE();
}
......@@ -332,7 +339,7 @@ STATIC mp_obj_t pyb_pin_irq(size_t n_args, const mp_obj_t *args) {
// return the irq object
return MP_OBJ_FROM_PTR(&pin_irq_obj[self->phys_port]);
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pyb_pin_irq_obj, 1, 3, pyb_pin_irq);
STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_pin_irq_obj, 1, pyb_pin_irq);
STATIC const mp_map_elem_t pyb_pin_locals_dict_table[] = {
// instance methods
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment