esp8266: Minimize gap between Inst/DataRAM segments and FlashROM segment.

With .rodata being in FlashROM now, gap can be much smaller now. InstRAM
can be max 32K, and with segment headers, that already makes it more than
32K. Then there's some .data still, and the next Flash page boundary is
0x9000. That figure should be more or less future-proof.

TODO: Refactor makeimg to take FlashROM segment offset from file name.

esp8266/Makefile

@@ -150,7 +150,7 @@ $(BUILD)/frozen.c: $(wildcard $(SCRIPTDIR)/*) $(CONFVARS_FILE)
 deploy: $(BUILD)/firmware-combined.bin
 	$(ECHO) "Writing $< to the board"
 	#$(Q)esptool.py --port $(PORT) write_flash 0 $<
-	$(Q)esptool.py --port $(PORT) --baud $(BAUD) write_flash --flash_size=8m 0 $(BUILD)/firmware.elf-0x00000.bin 0x10000 $(BUILD)/firmware.elf-0x10000.bin
+	$(Q)esptool.py --port $(PORT) --baud $(BAUD) write_flash --flash_size=8m 0 $(BUILD)/firmware.elf-0x00000.bin 0x9000 $(BUILD)/firmware.elf-0x0[1-f]000.bin
 
 reset:
 	echo -e "\r\nimport pyb; pyb.hard_reset()\r\n" >$(PORT)
@@ -158,7 +158,7 @@ reset:
 $(BUILD)/firmware-combined.bin: $(BUILD)/firmware.elf
 	$(ECHO) "Create $@"
 	$(Q)esptool.py elf2image $^
-	$(Q)$(PYTHON) makeimg.py $(BUILD)/firmware.elf-0x00000.bin $(BUILD)/firmware.elf-0x10000.bin $@
+	$(Q)$(PYTHON) makeimg.py $(BUILD)/firmware.elf-0x00000.bin $(BUILD)/firmware.elf-0x0[1-f]000.bin $@
 
 $(BUILD)/firmware.elf: $(OBJ)
 	$(ECHO) "LINK $@"

esp8266/esp8266.ld

@@ -5,7 +5,7 @@ MEMORY
     dport0_0_seg : org = 0x3ff00000, len = 0x10
     dram0_0_seg :  org = 0x3ffe8000, len = 0x14000
     iram1_0_seg :  org = 0x40100000, len = 0x8000
-    irom0_0_seg :  org = 0x40210000, len = 0x80000
+    irom0_0_seg :  org = 0x40209000, len = 0x80000
 }
 
 /* define the top of RAM */

esp8266/makeimg.py

 import sys
 
+SEGS_MAX_SIZE = 0x9000
+
 assert len(sys.argv) == 4
 
 with open(sys.argv[3], 'wb') as fout:
@@ -9,7 +11,7 @@ with open(sys.argv[3], 'wb') as fout:
         fout.write(data_flash)
         print('flash    ', len(data_flash))
 
-    pad = b'\xff' * (0x10000 - len(data_flash))
+    pad = b'\xff' * (SEGS_MAX_SIZE - len(data_flash))
     fout.write(pad)
     print('padding  ', len(pad))
 
@@ -18,4 +20,4 @@ with open(sys.argv[3], 'wb') as fout:
         fout.write(data_rom)
         print('irom0text', len(data_rom))
 
-    print('total    ', 0x10000 + len(data_rom))
+    print('total    ', SEGS_MAX_SIZE + len(data_rom))