Skip to content

GitLab

M
micropython
Commit 7d4a2f77 authored by Damien George's avatar Damien George
Browse files
Options

all: Make use of $(TOP) variable in Makefiles, instead of "..". 

$(TOP) is defined in py/mkenv.mk and should be used to refer to the top
level of this repository.
parent f9dfd8aa
Hide whitespace changes
Inline Side-by-side
Showing with 87 additions and 87 deletions
bare-arm/Makefile
View file @ 7d4a2f77
......@@ -4,12 +4,12 @@ include ../py/mkenv.mk
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
......@@ -45,4 +45,4 @@ $(BUILD)/firmware.elf: $(OBJ)
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
cc3200/Makefile
View file @ 7d4a2f77
......@@ -34,7 +34,7 @@ ifeq ($(BTARGET), application)
# qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h
# include MicroPython make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
include application.mk
else
ifeq ($(BTARGET), bootloader)
......@@ -45,7 +45,7 @@ endif
endif
# always include MicroPython make rules
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
erase:
cc3200tool -p $(PORT) format_flash --size $(FLASH_SIZE_$(BOARD))
......
cc3200/application.mk
View file @ 7d4a2f77
APP_INC = -I.
APP_INC += -I..
APP_INC += -I$(TOP)
APP_INC += -Ifatfs/src
APP_INC += -Ifatfs/src/drivers
APP_INC += -IFreeRTOS
......@@ -10,7 +10,7 @@ APP_INC += -Ihal
APP_INC += -Ihal/inc
APP_INC += -Imisc
APP_INC += -Imods
APP_INC += -I../drivers/cc3100/inc
APP_INC += -I$(TOP)/drivers/cc3100/inc
APP_INC += -Isimplelink
APP_INC += -Isimplelink/oslib
APP_INC += -Itelnet
......@@ -18,7 +18,7 @@ APP_INC += -Iutil
APP_INC += -Ibootmgr
APP_INC += -I$(BUILD)
APP_INC += -I$(BUILD)/genhdr
APP_INC += -I../stmhal
APP_INC += -I$(TOP)/stmhal
APP_CPPDEFINES = -Dgcc -DTARGET_IS_CC3200 -DSL_FULL -DUSE_FREERTOS
......
cc3200/bootmgr/bootloader.mk
View file @ 7d4a2f77
......@@ -4,13 +4,13 @@ BOOT_INC = -Ibootmgr
BOOT_INC += -Ibootmgr/sl
BOOT_INC += -Ihal
BOOT_INC += -Ihal/inc
BOOT_INC += -I../drivers/cc3100/inc
BOOT_INC += -I$(TOP)/drivers/cc3100/inc
BOOT_INC += -Imisc
BOOT_INC += -Imods
BOOT_INC += -Isimplelink
BOOT_INC += -Isimplelink/oslib
BOOT_INC += -Iutil
BOOT_INC += -I..
BOOT_INC += -I$(TOP)
BOOT_INC += -I.
BOOT_INC += -I$(BUILD)
......
esp8266/Makefile
View file @ 7d4a2f77
......@@ -12,7 +12,7 @@ FROZEN_DIR ?= scripts
FROZEN_MPY_DIR ?= modules
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
FWBIN = $(BUILD)/firmware-combined.bin
PORT ?= /dev/ttyACM0
......@@ -23,7 +23,7 @@ CROSS_COMPILE = xtensa-lx106-elf-
ESP_SDK = $(shell $(CC) -print-sysroot)/usr
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I$(ESP_SDK)/include
......@@ -220,16 +220,16 @@ ota:
#$(BUILD)/pins_$(BOARD).o: $(BUILD)/pins_$(BOARD).c
# $(call compile_c)
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
axtls: $(BUILD)/libaxtls.a
$(BUILD)/libaxtls.a:
cd ../lib/axtls; cp config/upyconfig config/.config
cd ../lib/axtls; $(MAKE) oldconfig -B
cd ../lib/axtls; $(MAKE) clean
cd ../lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)" AR="$(AR)" CFLAGS_EXTRA="$(CFLAGS_XTENSA) -Dabort=abort_ -DRT_MAX_PLAIN_LENGTH=1024 -DRT_EXTRA=4096"
cp ../lib/axtls/_stage/libaxtls.a $@
cd $(TOP)/lib/axtls; cp config/upyconfig config/.config
cd $(TOP)/lib/axtls; $(MAKE) oldconfig -B
cd $(TOP)/lib/axtls; $(MAKE) clean
cd $(TOP)/lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)" AR="$(AR)" CFLAGS_EXTRA="$(CFLAGS_XTENSA) -Dabort=abort_ -DRT_MAX_PLAIN_LENGTH=1024 -DRT_EXTRA=4096"
cp $(TOP)/lib/axtls/_stage/libaxtls.a $@
clean-modules:
git clean -f -d modules
......
minimal/Makefile
View file @ 7d4a2f77
......@@ -6,19 +6,19 @@ CROSS = 0
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
ifeq ($(CROSS), 1)
CROSS_COMPILE = arm-none-eabi-
endif
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
ifeq ($(CROSS), 1)
DFU = ../tools/dfu.py
PYDFU = ../tools/pydfu.py
DFU = $(TOP)/tools/dfu.py
PYDFU = $(TOP)/tools/pydfu.py
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
CFLAGS = $(INC) -Wall -Werror -std=c99 -nostdlib $(CFLAGS_CORTEX_M4) $(COPT)
LDFLAGS = -nostdlib -T stm32f405.ld -Map=$@.map --cref --gc-sections
......@@ -57,7 +57,7 @@ endif
$(BUILD)/_frozen_mpy.c: frozentest.mpy $(BUILD)/genhdr/qstrdefs.generated.h
$(ECHO) "MISC freezing bytecode"
$(Q)../tools/mpy-tool.py -f -q $(BUILD)/genhdr/qstrdefs.preprocessed.h -mlongint-impl=none $< > $@
$(Q)$(TOP)/tools/mpy-tool.py -f -q $(BUILD)/genhdr/qstrdefs.preprocessed.h -mlongint-impl=none $< > $@
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "LINK $@"
......@@ -87,4 +87,4 @@ run:
test: $(BUILD)/firmware.elf
$(Q)/bin/echo -e "print('hello world!', list(x+1 for x in range(10)), end='eol\\\\n')\\r\\n\\x04" | $(BUILD)/firmware.elf | tail -n2 | grep "^hello world! \\[1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\]eol"
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
mpy-cross/Makefile
View file @ 7d4a2f77
......@@ -23,10 +23,10 @@ QSTR_DEFS = qstrdefsport.h
UNAME_S := $(shell uname -s)
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
# compiler settings
......@@ -71,4 +71,4 @@ endif
OBJ = $(PY_O)
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
pic16bit/Makefile
View file @ 7d4a2f77
......@@ -4,7 +4,7 @@ include ../py/mkenv.mk
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
XC16 = /opt/microchip/xc16/v1.24
CROSS_COMPILE = $(XC16)/bin/xc16-
......@@ -13,7 +13,7 @@ PARTFAMILY = dsPIC33F
PART = 33FJ256GP506
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I$(XC16)/include
INC += -I$(XC16)/support/$(PARTFAMILY)/h
......@@ -67,4 +67,4 @@ $(BUILD)/firmware.elf: $(OBJ)
$(PY_BUILD)/gc.o: CFLAGS += -O1
$(PY_BUILD)/vm.o: CFLAGS += -O1
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
py/py.mk
View file @ 7d4a2f77
......@@ -22,13 +22,13 @@ CFLAGS_MOD += -DFFCONF_H=\"lib/oofatfs/ffconf.h\"
ifeq ($(MICROPY_PY_USSL),1)
CFLAGS_MOD += -DMICROPY_PY_USSL=1
ifeq ($(MICROPY_SSL_AXTLS),1)
CFLAGS_MOD += -DMICROPY_SSL_AXTLS=1 -I../lib/axtls/ssl -I../lib/axtls/crypto -I../lib/axtls/config
CFLAGS_MOD += -DMICROPY_SSL_AXTLS=1 -I$(TOP)/lib/axtls/ssl -I$(TOP)/lib/axtls/crypto -I$(TOP)/lib/axtls/config
LDFLAGS_MOD += -Lbuild -laxtls
else ifeq ($(MICROPY_SSL_MBEDTLS),1)
# Can be overridden by ports which have "builtin" mbedTLS
MICROPY_SSL_MBEDTLS_INCLUDE ?= ../lib/mbedtls/include
MICROPY_SSL_MBEDTLS_INCLUDE ?= $(TOP)/lib/mbedtls/include
CFLAGS_MOD += -DMICROPY_SSL_MBEDTLS=1 -I$(MICROPY_SSL_MBEDTLS_INCLUDE)
LDFLAGS_MOD += -L../lib/mbedtls/library -lmbedx509 -lmbedtls -lmbedcrypto
LDFLAGS_MOD += -L$(TOP)/lib/mbedtls/library -lmbedx509 -lmbedtls -lmbedcrypto
endif
endif
......@@ -38,7 +38,7 @@ endif
ifeq ($(MICROPY_PY_LWIP),1)
LWIP_DIR = lib/lwip/src
INC += -I../lib/lwip/src/include -I../lib/lwip/src/include/ipv4 -I../extmod/lwip-include
INC += -I$(TOP)/lib/lwip/src/include -I$(TOP)/lib/lwip/src/include/ipv4 -I$(TOP)/extmod/lwip-include
CFLAGS_MOD += -DMICROPY_PY_LWIP=1
SRC_MOD += extmod/modlwip.c lib/netutils/netutils.c
SRC_MOD += $(addprefix $(LWIP_DIR)/,\
......@@ -75,7 +75,7 @@ endif
ifeq ($(MICROPY_PY_BTREE),1)
BTREE_DIR = lib/berkeley-db-1.xx
BTREE_DEFS = -D__DBINTERFACE_PRIVATE=1 -Dmpool_error=printf -Dabort=abort_ -Dvirt_fd_t=mp_obj_t "-DVIRT_FD_T_HEADER=<py/obj.h>"
INC += -I../$(BTREE_DIR)/PORT/include
INC += -I$(TOP)/$(BTREE_DIR)/PORT/include
SRC_MOD += extmod/modbtree.c
SRC_MOD += $(addprefix $(BTREE_DIR)/,\
btree/bt_close.c \
......
qemu-arm/Makefile
View file @ 7d4a2f77
......@@ -5,14 +5,14 @@ include ../py/mkenv.mk
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I../tools/tinytest/
INC += -I$(TOP)/tools/tinytest/
CFLAGS_CORTEX_M3 = -mthumb -mcpu=cortex-m3 -mfloat-abi=soft
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -std=gnu99 $(CFLAGS_CORTEX_M3) $(COPT) \
......@@ -98,10 +98,10 @@ test: $(BUILD)/firmware-test.elf
$(BUILD)/test_main.o: $(BUILD)/genhdr/tests.h
$(BUILD)/genhdr/tests.h:
$(Q)echo "Generating $@";(cd ../tests; ../tools/tinytest-codegen.py) > $@
$(Q)echo "Generating $@";(cd $(TOP)/tests; ../tools/tinytest-codegen.py) > $@
$(BUILD)/tinytest.o:
$(Q)$(CC) $(CFLAGS) -DNO_FORKING -o $@ -c ../tools/tinytest/tinytest.c
$(Q)$(CC) $(CFLAGS) -DNO_FORKING -o $@ -c $(TOP)/tools/tinytest/tinytest.c
## `$(LD)` doesn't seem to like `--specs` for some reason, but we can just use `$(CC)` here.
$(BUILD)/firmware.elf: $(OBJ_COMMON) $(OBJ_RUN)
......@@ -112,4 +112,4 @@ $(BUILD)/firmware-test.elf: $(OBJ_COMMON) $(OBJ_TEST)
$(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
stmhal/Makefile
View file @ 7d4a2f77
......@@ -19,7 +19,7 @@ QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
FROZEN_MPY_DIR ?= modules
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
LD_DIR=boards
CMSIS_DIR=cmsis
......@@ -27,10 +27,10 @@ HAL_DIR=hal/$(MCU_SERIES)
USBDEV_DIR=usbdev
#USBHOST_DIR=usbhost
FATFS_DIR=lib/oofatfs
DFU=../tools/dfu.py
DFU=$(TOP)/tools/dfu.py
# may need to prefix dfu-util with sudo
USE_PYDFU ?= 1
PYDFU ?= ../tools/pydfu.py
PYDFU ?= $(TOP)/tools/pydfu.py
DFU_UTIL ?= dfu-util
DEVICE=0483:df11
STFLASH ?= st-flash
......@@ -40,9 +40,9 @@ OPENOCD_CONFIG ?= boards/openocd_stm32f4.cfg
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I../lib/cmsis/inc
INC += -I$(TOP)/lib/cmsis/inc
INC += -I$(CMSIS_DIR)/
INC += -I$(HAL_DIR)/inc
INC += -I$(USBDEV_DIR)/core/inc -I$(USBDEV_DIR)/class/inc
......@@ -406,8 +406,8 @@ GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
INSERT_USB_IDS = ../tools/insert-usb-ids.py
FILE2H = ../tools/file2h.py
INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
FILE2H = $(TOP)/tools/file2h.py
USB_IDS_FILE = usb.h
CDCINF_TEMPLATE = pybcdc.inf_template
......@@ -464,4 +464,4 @@ $(GEN_CDCINF_FILE): $(CDCINF_TEMPLATE) $(INSERT_USB_IDS) $(USB_IDS_FILE) | $(HEA
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(INSERT_USB_IDS) $(USB_IDS_FILE) $< > $@
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
teensy/Makefile
View file @ 7d4a2f77
......@@ -4,7 +4,7 @@ include ../py/mkenv.mk
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
# If you set USE_ARDUINO_TOOLCHAIN=1 then this makefile will attempt to use
# the toolchain that comes with Teensyduino
......@@ -30,8 +30,8 @@ CFLAGS_TEENSY = -DF_CPU=96000000 -DUSB_SERIAL -D__MK20DX256__
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mcpu=cortex-m4 -msoft-float -mfloat-abi=soft -fsingle-precision-constant -Wdouble-promotion $(CFLAGS_TEENSY)
INC += -I.
INC += -I..
INC += -I../stmhal
INC += -I$(TOP)
INC += -I$(TOP)/stmhal
INC += -I$(BUILD)
INC += -Icore
......@@ -135,7 +135,7 @@ SRC_C += \
OBJ += $(BUILD)/memzip-files.o
MAKE_MEMZIP = ../lib/memzip/make-memzip.py
MAKE_MEMZIP = $(TOP)/lib/memzip/make-memzip.py
ifeq ($(MEMZIP_DIR),)
MEMZIP_DIR = memzip_files
endif
......@@ -232,4 +232,4 @@ $(BUILD)/%.pp: $(BUILD)/%.c
$(ECHO) "PreProcess $<"
$(Q)$(CC) $(CFLAGS) -E -Wp,-C,-dD,-dI -o $@ $<
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
unix/Makefile
View file @ 7d4a2f77
......@@ -14,10 +14,10 @@ QSTR_DEFS = qstrdefsport.h
UNAME_S := $(shell uname -s)
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
# compiler settings
......@@ -87,7 +87,7 @@ endif
endif
ifeq ($(MICROPY_USE_READLINE),1)
INC += -I../lib/mp-readline
INC += -I$(TOP)/lib/mp-readline
CFLAGS_MOD += -DMICROPY_USE_READLINE=1
LIB_SRC_C_EXTRA += mp-readline/readline.c
endif
......@@ -107,11 +107,11 @@ endif
ifeq ($(MICROPY_PY_FFI),1)
ifeq ($(MICROPY_STANDALONE),1)
LIBFFI_CFLAGS_MOD := -I$(shell ls -1d ../lib/libffi/build_dir/out/lib/libffi-*/include)
LIBFFI_CFLAGS_MOD := -I$(shell ls -1d $(TOP)/lib/libffi/build_dir/out/lib/libffi-*/include)
ifeq ($(MICROPY_FORCE_32BIT),1)
LIBFFI_LDFLAGS_MOD = ../lib/libffi/build_dir/out/lib32/libffi.a
LIBFFI_LDFLAGS_MOD = $(TOP)/lib/libffi/build_dir/out/lib32/libffi.a
else
LIBFFI_LDFLAGS_MOD = ../lib/libffi/build_dir/out/lib/libffi.a
LIBFFI_LDFLAGS_MOD = $(TOP)/lib/libffi/build_dir/out/lib/libffi.a
endif
else
LIBFFI_CFLAGS_MOD := $(shell pkg-config --cflags libffi)
......@@ -183,13 +183,13 @@ MPY_CROSS_FLAGS += -mcache-lookup-bc
endif
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
.PHONY: test
test: $(PROG) ../tests/run-tests
test: $(PROG) $(TOP)/tests/run-tests
$(eval DIRNAME=$(notdir $(CURDIR)))
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/$(PROG) ./run-tests
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/$(PROG) ./run-tests
# install micropython in /usr/local/bin
TARGET = micropython
......@@ -254,12 +254,12 @@ coverage:
coverage_test: coverage
$(eval DIRNAME=$(notdir $(CURDIR)))
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests -d thread
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --emit native
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --via-mpy -d basics float
gcov -o build-coverage/py ../py/*.c
gcov -o build-coverage/extmod ../extmod/*.c
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests -d thread
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --emit native
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --via-mpy -d basics float
gcov -o build-coverage/py $(TOP)/py/*.c
gcov -o build-coverage/extmod $(TOP)/extmod/*.c
# Value of configure's --host= option (required for cross-compilation).
# Deduce it from CROSS_COMPILE by default, but can be overridden.
......@@ -274,21 +274,21 @@ deplibs: libffi axtls
# install-exec-recursive & install-data-am targets are used to avoid building
# docs and depending on makeinfo
libffi:
cd ../lib/libffi; git clean -d -x -f
cd ../lib/libffi; ./autogen.sh
mkdir -p ../lib/libffi/build_dir; cd ../lib/libffi/build_dir; \
cd $(TOP)/lib/libffi; git clean -d -x -f
cd $(TOP)/lib/libffi; ./autogen.sh
mkdir -p $(TOP)/lib/libffi/build_dir; cd $(TOP)/lib/libffi/build_dir; \
../configure $(CROSS_COMPILE_HOST) --prefix=$$PWD/out --disable-structs CC="$(CC)" CXX="$(CXX)" LD="$(LD)" CFLAGS="-Os -fomit-frame-pointer -fstrict-aliasing -ffast-math -fno-exceptions"; \
$(MAKE) install-exec-recursive; $(MAKE) -C include install-data-am
axtls: $(BUILD)/libaxtls.a
$(BUILD)/libaxtls.a: ../lib/axtls/README | $(OBJ_DIRS)
cd ../lib/axtls; cp config/upyconfig config/.config
cd ../lib/axtls; $(MAKE) oldconfig -B
cd ../lib/axtls; $(MAKE) clean
cd ../lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)"
cp ../lib/axtls/_stage/libaxtls.a $@
$(BUILD)/libaxtls.a: $(TOP)/lib/axtls/README | $(OBJ_DIRS)
cd $(TOP)/lib/axtls; cp config/upyconfig config/.config
cd $(TOP)/lib/axtls; $(MAKE) oldconfig -B
cd $(TOP)/lib/axtls; $(MAKE) clean
cd $(TOP)/lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)"
cp $(TOP)/lib/axtls/_stage/libaxtls.a $@
../lib/axtls/README:
$(TOP)/lib/axtls/README:
@echo "You cloned without --recursive, fetching submodules for you."
(cd ..; git submodule update --init --recursive)
(cd $(TOP); git submodule update --init --recursive)
windows/Makefile
View file @ 7d4a2f77
......@@ -8,10 +8,10 @@ PROG = micropython.exe
QSTR_DEFS = ../unix/qstrdefsport.h
# include py core make definitions
include ../py/py.mk
include $(TOP)/py/py.mk
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
# compiler settings
......@@ -62,4 +62,4 @@ SRC_QSTR += $(SRC_C)
# SRC_QSTR
SRC_QSTR_AUTO_DEPS +=
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
zephyr/Makefile
View file @ 7d4a2f77
......@@ -27,10 +27,10 @@ include $(Z_EXPORTS)
endif
include ../py/mkenv.mk
include ../py/py.mk
include $(TOP)/py/py.mk
INC += -I.
INC += -I..
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I$(ZEPHYR_BASE)/net/ip
INC += -I$(ZEPHYR_BASE)/net/ip/contiki
......@@ -59,7 +59,7 @@ OBJ = $(PY_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
CFLAGS = $(KBUILD_CFLAGS) $(NOSTDINC_FLAGS) $(ZEPHYRINCLUDE) \
-std=gnu99 -fomit-frame-pointer -DNDEBUG -DMICROPY_HEAP_SIZE=$(MICROPY_HEAP_SIZE) $(CFLAGS_EXTRA) $(INC)
include ../py/mkrules.mk
include $(TOP)/py/mkrules.mk
# We use single target here ($(Z_EXPORTS)) for simplicity, but actually
# number of things get generated here: 'initconfig' generates C header for
......@@ -102,4 +102,4 @@ prj_$(BOARD)_merged.conf: prj_base.conf prj_$(BOARD).conf
$(PYTHON) makeprj.py prj_base.conf prj_$(BOARD).conf $@
test:
cd ../tests && ./run-tests --target minimal --device "execpty:make -C ../zephyr run BOARD=$(BOARD) QEMU_PTY=1"
cd $(TOP)/tests && ./run-tests --target minimal --device "execpty:make -C ../zephyr run BOARD=$(BOARD) QEMU_PTY=1"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment