ports: Implement simple write polling for stdout.

This is a best-effort implementation of write polling.  It's difficult to
do correctly because if there are multiple output streams (eg UART and USB
CDC) then some may not be writeable while others are.  A full solution
should also have a return value from mp_hal_stdout_tx_strn(), returning the
number of bytes written to the stream(s).  That's also hard to define.

The renesas-ra and stm32 ports already implement a similar best-effort
mechanism for write polling.

Fixes issue #11026.
Signed-off-by: Damien George <damien@micropython.org>

ports/esp32/mphalport.c

@@ -88,6 +88,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
     if ((poll_flags & MP_STREAM_POLL_RD) && stdin_ringbuf.iget != stdin_ringbuf.iput) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if (poll_flags & MP_STREAM_POLL_WR) {
+        ret |= MP_STREAM_POLL_WR;
+    }
     return ret;
 }
 

ports/esp8266/esp_mphal.c

@@ -62,6 +62,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
     if ((poll_flags & MP_STREAM_POLL_RD) && stdin_ringbuf.iget != stdin_ringbuf.iput) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if (poll_flags & MP_STREAM_POLL_WR) {
+        ret |= mp_uos_dupterm_poll(poll_flags);
+    }
     return ret;
 }
 

ports/mimxrt/mphalport.c

@@ -86,6 +86,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
     if ((poll_flags & MP_STREAM_POLL_RD) && ringbuf_peek(&stdin_ringbuf) != -1) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if ((poll_flags & MP_STREAM_POLL_WR) && tud_cdc_connected() && tud_cdc_write_available() > 0) {
+        ret |= MP_STREAM_POLL_WR;
+    }
     #if MICROPY_PY_OS_DUPTERM
     ret |= mp_uos_dupterm_poll(poll_flags);
     #endif

ports/nrf/drivers/bluetooth/ble_uart.c

@@ -164,6 +164,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
         && !isBufferEmpty(mp_rx_ring_buffer)) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if ((poll_flags & MP_STREAM_POLL_WR) && ble_uart_enabled()) {
+        ret |= MP_STREAM_POLL_WR;
+    }
     return ret;
 }
 #endif

ports/nrf/drivers/usb/usb_cdc.c

@@ -213,6 +213,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
             ret |= MP_STREAM_POLL_RD;
         }
     }
+    if (poll_flags & MP_STREAM_POLL_WR) {
+        ret |= MP_STREAM_POLL_WR;
+    }
     return ret;
 }
 

ports/nrf/mphalport.c

@@ -179,6 +179,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
         && uart_rx_any(MP_STATE_PORT(board_stdio_uart))) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if ((poll_flags & MP_STREAM_POLL_WR) && MP_STATE_PORT(board_stdio_uart) != NULL) {
+        ret |= MP_STREAM_POLL_WR;
+    }
     return ret;
 }
 

ports/pic16bit/pic16bit_mphal.c

@@ -57,6 +57,9 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
     if ((poll_flags & MP_STREAM_POLL_RD) && uart_rx_any()) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if (poll_flags & MP_STREAM_POLL_WR) {
+        ret |= MP_STREAM_POLL_WR;
+    }
     return ret;
 }
 

ports/rp2/mphalport.c

@@ -98,6 +98,15 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
     if ((poll_flags & MP_STREAM_POLL_RD) && ringbuf_peek(&stdin_ringbuf) != -1) {
         ret |= MP_STREAM_POLL_RD;
     }
+    if (poll_flags & MP_STREAM_POLL_WR) {
+        #if MICROPY_HW_ENABLE_UART_REPL
+        ret |= MP_STREAM_POLL_WR;
+        #else
+        if (tud_cdc_connected() && tud_cdc_write_available() > 0) {
+            ret |= MP_STREAM_POLL_WR;
+        }
+        #endif
+    }
     #endif
     #if MICROPY_PY_OS_DUPTERM
     ret |= mp_uos_dupterm_poll(poll_flags);

ports/samd/mphalport.c

@@ -162,6 +162,10 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
         ret |= MP_STREAM_POLL_RD;
     }
 
+    if ((poll_flags & MP_STREAM_POLL_WR) && tud_cdc_connected() && tud_cdc_write_available() > 0) {
+        ret |= MP_STREAM_POLL_WR;
+    }
+
     #if MICROPY_PY_OS_DUPTERM
     ret |= mp_uos_dupterm_poll(poll_flags);
     #endif

ports/teensy/teensy_hal.c

@@ -32,6 +32,11 @@ uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
             ret |= MP_STREAM_POLL_RD;
         }
     }
+    if (poll_flags & MP_STREAM_POLL_WR) {
+        if (MP_STATE_PORT(pyb_stdio_uart) != NULL || usb_vcp_is_enabled()) {
+            ret |= MP_STREAM_POLL_WR;
+        }
+    }
     return ret;
 }