Skip to content

GitLab

M
micropython
Commit 1c7f9b16 authored by danicampora's avatar danicampora
Browse files
Options

cc3200: Remove UART info on README.md. 

The UART REPL it's not enabled by default anymore.
parent ceb16900
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 2 deletions
cc3200/README.md
View file @ 1c7f9b16
...@@ -53,8 +53,6 @@ If `WIPY_IP`, `WIPY_USER` or `WIPY_PWD` are omitted the default values (the ones ...@@ -53,8 +53,6 @@ If `WIPY_IP`, `WIPY_USER` or `WIPY_PWD` are omitted the default values (the ones
Once the software is running, you have two options to access the MicroPython REPL: Once the software is running, you have two options to access the MicroPython REPL:
- Through the UART.
**Connect to PORT 22, baud rate = 115200, parity = none, stop bits = 1**
- Through telnet. - Through telnet.
* Connect to the network created by the board (as boots up in AP mode), **ssid = "wipy-wlan", key = "www.wipy.io"**. * Connect to the network created by the board (as boots up in AP mode), **ssid = "wipy-wlan", key = "www.wipy.io"**.
* You can also reinitialize the WLAN in station mode and connect to another AP, or in AP mode but with a * You can also reinitialize the WLAN in station mode and connect to another AP, or in AP mode but with a
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment