Skip to content

GitLab

D
duo-buildroot-sdk
Commit e955c3f4 authored by sam.xiang's avatar sam.xiang Committed by forum_service
Browse files
Options

build: weekly update 2023-04-26 1. add huashanpi board 2. add new sensors:... 

build: weekly update 2023-04-26 1. add huashanpi board 2. add new sensors: gc0329,mis2008,tp2863 3. modified the configuration of some boards

Change-Id: I2d8814128ca6983d4a9f65c30c6598cca6d2e5ea
parent f0e3f7d1
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3664 additions and 3065 deletions
build/boards/cv180x/cv1800b_sophpi_duo_sd/cv1800b_sophpi_duo_sd_defconfig
View file @ e955c3f4
...@@ -13,17 +13,9 @@ CONFIG_NO_TP=y ...@@ -13,17 +13,9 @@ CONFIG_NO_TP=y
CONFIG_DDR_64MB_SIZE=y CONFIG_DDR_64MB_SIZE=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_sd=y CONFIG_STORAGE_TYPE_sd=y
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y CONFIG_SENSOR_TUNING_PARAM_cv180x_src_sms_sc200ai=y
CONFIG_SENSOR_GCORE_GC4653=y CONFIG_SENSOR_SMS_SC200AI=y
CONFIG_SENSOR_SMS_SC3335=y CONFIG_SENSOR_GCORE_GC2053=y
CONFIG_SENSOR_SMS_SC500AI=y
CONFIG_SENSOR_SONY_IMX307=y
CONFIG_SENSOR_SONY_IMX307_2L=y
CONFIG_SENSOR_SONY_IMX307_SLAVE=y
CONFIG_SENSOR_SONY_IMX327=y
CONFIG_SENSOR_SONY_IMX327_2L=y
CONFIG_SENSOR_SONY_IMX327_SLAVE=y
CONFIG_SENSOR_OV_OS04C10=y
CONFIG_UBOOT_2021_10=y CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y CONFIG_KERNEL_LZMA=y
......
build/boards/cv180x/cv1800b_sophpi_duo_sd/linux/cvitek_cv1800b_sophpi_duo_sd_defconfig
View file @ e955c3f4
...@@ -177,6 +177,7 @@ CONFIG_USB_F_UAC1=y ...@@ -177,6 +177,7 @@ CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UVC=y CONFIG_USB_F_UVC=y
CONFIG_USB_CONFIGFS=y CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_ACM=y CONFIG_USB_CONFIGFS_ACM=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI=y
...@@ -252,7 +253,7 @@ CONFIG_FRAME_POINTER=n ...@@ -252,7 +253,7 @@ CONFIG_FRAME_POINTER=n
CONFIG_DEBUG_MISC=n CONFIG_DEBUG_MISC=n
CONFIG_RCU_TRACE=y CONFIG_RCU_TRACE=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_MULTIUSER=n CONFIG_MULTIUSER=y
CONFIG_BUG=n CONFIG_BUG=n
CONFIG_IO_URING=n CONFIG_IO_URING=n
CONFIG_ADVISE_SYSCALLS=n CONFIG_ADVISE_SYSCALLS=n
......
build/boards/cv180x/cv1800b_sophpi_duo_sd/u-boot/cvi_board_init.c
View file @ e955c3f4
int cvi_board_init(void) int cvi_board_init(void)
{ {
#if defined(CV180X_QFN_88_PIN) // sensor i2c1 reset mclk
PINMUX_CONFIG(PAD_MIPI_TXP1, IIC2_SCL);
PINMUX_CONFIG(PAD_MIPI_TXM1, IIC2_SDA);
PINMUX_CONFIG(PAD_MIPI_TXP0, XGPIOC_13);
PINMUX_CONFIG(PAD_MIPI_TXM0, CAM_MCLK1);
#elif defined(CV180X_QFN_88_PIN_38)
//I2C2
PINMUX_CONFIG(PAD_MIPI_TXP1, IIC2_SCL);
PINMUX_CONFIG(PAD_MIPI_TXM1, IIC2_SDA);
//CAM_RST0
PINMUX_CONFIG(PAD_MIPI_TXP2, XGPIOC_17);
PINMUX_CONFIG(PAD_MIPI_TXM2, XGPIOC_16);
//CAM_MCLK0
PINMUX_CONFIG(PAD_MIPI_TXP0, CAM_MCLK0);
PINMUX_CONFIG(PAD_MIPI_TXM0, XGPIOC_12);
//IRCUT
//PINMUX_CONFIG(SD1_D2, PWR_GPIO19);
//PINMUX_CONFIG(SD1_D3, PWR_GPIO18);
#elif defined(CV180X_QFN_68_PIN)
PINMUX_CONFIG(PAD_MIPIRX1P, IIC1_SDA);
PINMUX_CONFIG(PAD_MIPIRX0N, IIC1_SCL);
PINMUX_CONFIG(PAD_MIPIRX1N, XGPIOC_8);
PINMUX_CONFIG(PAD_MIPIRX0P, CAM_MCLK0);
//IRCUT
//PINMUX_CONFIG(SD1_D2, PWR_GPIO19);
//PINMUX_CONFIG(SD1_D3, PWR_GPIO18);
#endif
PINMUX_CONFIG(PAD_MIPIRX0P, CAM_MCLK0); // MCLK0 PINMUX_CONFIG(PAD_MIPIRX0P, CAM_MCLK0); // MCLK0
PINMUX_CONFIG(PAD_MIPIRX1P, IIC1_SDA); // I2C 2 PINMUX_CONFIG(PAD_MIPIRX1P, IIC1_SDA); // I2C 2
PINMUX_CONFIG(PAD_MIPIRX0N, IIC1_SCL); PINMUX_CONFIG(PAD_MIPIRX0N, IIC1_SCL);
PINMUX_CONFIG(PAD_MIPIRX1N, XGPIOC_8);
// all default gpio
PINMUX_CONFIG(SPINOR_HOLD_X, XGPIOA_26);
PINMUX_CONFIG(SPINOR_SCK, XGPIOA_22);
PINMUX_CONFIG(SPINOR_MOSI, XGPIOA_25);
PINMUX_CONFIG(SPINOR_WP_X, XGPIOA_27);
PINMUX_CONFIG(SPINOR_MISO, XGPIOA_23);
PINMUX_CONFIG(SPINOR_CS_X, XGPIOA_24);
PINMUX_CONFIG(IIC0_SDA, XGPIOA_29);
PINMUX_CONFIG(IIC0_SCL, XGPIOA_28);
// sd1
PINMUX_CONFIG(SD1_D3, PWR_GPIO_18);
PINMUX_CONFIG(SD1_D2, PWR_GPIO_19);
PINMUX_CONFIG(SD1_D1, PWR_GPIO_20);
PINMUX_CONFIG(SD1_D0, PWR_GPIO_21);
PINMUX_CONFIG(SD1_CMD, PWR_GPIO_22);
PINMUX_CONFIG(SD1_CLK, PWR_GPIO_23);
//default to gpio
PINMUX_CONFIG(PAD_MIPIRX1P, XGPIOC_9);
PINMUX_CONFIG(PAD_MIPIRX0N, XGPIOC_10);
PINMUX_CONFIG(USB_VBUS_DET, XGPIOB_6);
PINMUX_CONFIG(PWR_SEQ2, PWR_GPIO_4);
return 0; return 0;
} }
build/boards/cv180x/cv1800b_sophpi_duo_sd/u-boot/cvitek_cv1800b_sophpi_duo_sd_defconfig
View file @ e955c3f4
...@@ -40,7 +40,7 @@ CONFIG_BOOTM_OPENRTOS=y ...@@ -40,7 +40,7 @@ CONFIG_BOOTM_OPENRTOS=y
# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set # CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_MEMORY is not set CONFIG_CMD_MEMORY=y
# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set # CONFIG_CMD_LOADS is not set
......
build/boards/cv180x/cv1800b_sophpi_duo_sd/u-boot/cvitek_cv1800b_sophpi_duo_sd_rls_defconfig
View file @ e955c3f4
...@@ -6,7 +6,7 @@ CONFIG_IDENT_STRING="cvitek_cv180x" ...@@ -6,7 +6,7 @@ CONFIG_IDENT_STRING="cvitek_cv180x"
CONFIG_ARCH_RV64I=y CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y CONFIG_RISCV_SMODE=y
CONFIG_TARGET_CVITEK_CV180X=y CONFIG_TARGET_CVITEK_CV180X=y
# CONFIG_CVITEK_SPI_FLASH is not set # CONFIG_CVITEK_SPI_FLASH is not set
CONFIG_FIT=y CONFIG_FIT=y
# CONFIG_FIT_PRINT is not set # CONFIG_FIT_PRINT is not set
# CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_LEGACY_IMAGE_FORMAT is not set
...@@ -40,11 +40,11 @@ CONFIG_BOOTM_OPENRTOS=y ...@@ -40,11 +40,11 @@ CONFIG_BOOTM_OPENRTOS=y
# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set # CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_MEMORY is not set CONFIG_CMD_MEMORY=y
# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set # CONFIG_CMD_LOADS is not set
# CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_SAVEENV is not set
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y CONFIG_CMD_PART=y
CONFIG_CMD_ECHO=y CONFIG_CMD_ECHO=y
...@@ -65,7 +65,7 @@ CONFIG_MMC_SDHCI=y ...@@ -65,7 +65,7 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CVITEK=y CONFIG_MMC_SDHCI_CVITEK=y
CONFIG_MTD=y CONFIG_MTD=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHY_CVITEK_CV182XA=y CONFIG_PHY_CVITEK_CV182XA=y
CONFIG_DM_ETH=y CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y CONFIG_ETH_DESIGNWARE=y
...@@ -77,6 +77,6 @@ CONFIG_LZMA=y ...@@ -77,6 +77,6 @@ CONFIG_LZMA=y
# CONFIG_GZIP is not set # CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set # CONFIG_EFI_LOADER is not set
# CONFIG_TOOLS_LIBCRYPTO is not set # CONFIG_TOOLS_LIBCRYPTO is not set
# CONFIG_ENV_SUPPORT is not set # CONFIG_ENV_SUPPORT is not set
# CONFIG_ENV_OVERWRITE is not set # CONFIG_ENV_OVERWRITE is not set
CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_NOWHERE=y
build/boards/cv180x/cv1800c_wevb_0009a_spinor/linux/cvitek_cv1800c_wevb_0009a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1800b_wdmb_0008a_spinor/linux/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv1800c_wevb_0009a_spinor/u-boot/cvitek_cv1800c_wevb_0009a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1800b_wdmb_0008a_spinor/u-boot/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv1801b_wevb_0008a_spinor/linux/cvitek_cv1801b_wevb_0008a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1800b_wdmb_0008a_spinor/linux/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv1801b_wevb_0008a_spinor/u-boot/cvitek_cv1801b_wevb_0008a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1800b_wdmb_0008a_spinor/u-boot/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv1801c_wevb_0009a_spinand/linux/cvitek_cv1801c_wevb_0009a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1800b_wdmb_0008a_spinor/linux/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv1801c_wevb_0009a_spinand/u-boot/cvitek_cv1801c_wevb_0009a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1800b_wdmb_0008a_spinor/u-boot/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv180zb_wdmb_0008a_spinor/cv180zb_wdmb_0008a_spinor_defconfig
View file @ e955c3f4
...@@ -15,6 +15,7 @@ CONFIG_BOOT_IMAGE_SINGLE_DTB=y ...@@ -15,6 +15,7 @@ CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_spinor=y CONFIG_STORAGE_TYPE_spinor=y
CONFIG_SENSOR_TUNING_PARAM_cv180x_src_gcore_gc4653=y CONFIG_SENSOR_TUNING_PARAM_cv180x_src_gcore_gc4653=y
CONFIG_SENSOR_SMS_SC3336=y CONFIG_SENSOR_SMS_SC3336=y
CONFIG_SENSOR_GCORE_GC2053=y
CONFIG_UBOOT_2021_10=y CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y CONFIG_KERNEL_LZMA=y
......
build/boards/cv180x/cv180zb_wevb_0008a_spinor/cv180zb_wevb_0008a_spinor_defconfig
View file @ e955c3f4
...@@ -13,8 +13,9 @@ CONFIG_NO_TP=y ...@@ -13,8 +13,9 @@ CONFIG_NO_TP=y
CONFIG_DDR_64MB_SIZE=y CONFIG_DDR_64MB_SIZE=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_spinor=y CONFIG_STORAGE_TYPE_spinor=y
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y CONFIG_SENSOR_TUNING_PARAM_cv180x_src_gcore_gc2053=y
CONFIG_SENSOR_SMS_SC3336=y CONFIG_SENSOR_SMS_SC3336=y
CONFIG_SENSOR_GCORE_GC2053=y
CONFIG_UBOOT_2021_10=y CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y CONFIG_KERNEL_LZMA=y
...@@ -31,9 +32,7 @@ CONFIG_TARGET_PACKAGE_CRONTABS=y ...@@ -31,9 +32,7 @@ CONFIG_TARGET_PACKAGE_CRONTABS=y
CONFIG_TARGET_PACKAGE_WIFI=y CONFIG_TARGET_PACKAGE_WIFI=y
CONFIG_TARGET_PACKAGE_DROPBEAR=y CONFIG_TARGET_PACKAGE_DROPBEAR=y
CONFIG_TARGET_PACKAGE_NTP=y CONFIG_TARGET_PACKAGE_NTP=y
CONFIG_ENABLE_FREERTOS=y
CONFIG_ENABLE_RTOS_DUMP_PRINT=y CONFIG_ENABLE_RTOS_DUMP_PRINT=y
CONFIG_DUMP_PRINT_SZ_IDX=17 CONFIG_DUMP_PRINT_SZ_IDX=17
CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y
CONFIG_USB_OSDRV_CVITEK_GADGET=n CONFIG_USB_OSDRV_CVITEK_GADGET=n
CONFIG_BUILD_FOR_DEBUG=n
build/boards/cv180x/cv180zb_wevb_0008a_spinor/dts_riscv/cv180zb_wevb_0008a_spinor.dts
View file @ e955c3f4
...@@ -9,6 +9,11 @@ ...@@ -9,6 +9,11 @@
}; };
/ { / {
wifi_pin {
compatible = "cvitek,wifi-pin";
poweron-gpio = <&porte 25 GPIO_ACTIVE_HIGH>;
wakeup-gpio = <&porte 26 GPIO_ACTIVE_HIGH>;
};
}; };
build/boards/cv180x/cv180zb_wevb_0008a_spinor/linux/cvitek_cv180zb_wevb_0008a_spinor_defconfig deleted 120000 → 0
View file @ f0e3f7d1
../../cv180zb_wdmb_0008a_spinor/linux/cvitek_cv180zb_wdmb_0008a_spinor_defconfig
\ No newline at end of file
build/boards/cv180x/cv180zb_wevb_0008a_spinor/linux/cvitek_cv180zb_wevb_0008a_spinor_defconfig 0 → 100644
View file @ e955c3f4
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_BUG is not set
# CONFIG_BASE_FULL is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_KALLSYMS is not set
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_FORCE_MAX_ZONEORDER=10
CONFIG_ARCH_CVITEK=y
CONFIG_SOC_THEAD=y
# CONFIG_RISCV_SWIOTLB is not set
CONFIG_VECTOR=y
CONFIG_VECTOR_0_7=y
# CONFIG_COMPAT is not set
CONFIG_ARCH_CV180X=y
CONFIG_ARCH_CVITEK_CHIP="cv180x"
CONFIG_ARCH_CV180X_ASIC=y
CONFIG_COMPAT_32BIT_TIME=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_COREDUMP is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_RFKILL=y
CONFIG_UEVENT_HELPER=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_BLOCK=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SPI_CVI_SPIF=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
CONFIG_STMMAC_ETH=y
# CONFIG_DWMAC_GENERIC is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_CV182XA_PHY=y
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RTL8189FS=m
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=5
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PINCTRL=y
CONFIG_CVITEK_PINCTRL_CV1835=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
CONFIG_POWER_RESET=y
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_EMULATION=y
CONFIG_CV180X_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_HDA_PREALLOC_SIZE=1
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_CV182XA_CV182XAADC=y
CONFIG_SND_SOC_CV182XA_CV182XADAC=y
CONFIG_SND_CV1835_I2S=y
CONFIG_SND_SOC_CV182XAADC=y
CONFIG_SND_SOC_CV182XADAC=y
CONFIG_SND_SOC_CV1835_USE_AUDIO_PLL=y
CONFIG_CV1835_I2S_SUBSYS=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_GADGET=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UVC=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_CVI=y
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC_CVITEK=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_STAGING=y
CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CARVEOUT_HEAP=y
CONFIG_ION_CMA_HEAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_CV1835_SYSDMA_REMAP=y
CONFIG_PWM=y
CONFIG_SIFIVE_PLIC=y
CONFIG_ANDROID=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
CONFIG_VFAT_FS=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
# CONFIG_EFIVAR_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_MISC is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
build/boards/cv180x/cv180zb_wevb_0008a_spinor/linux/cvitek_cv180zb_wevb_0008a_spinor_rls_defconfig deleted 120000 → 0
View file @ f0e3f7d1
../../cv1800b_wdmb_0008a_spinor/linux/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv180x/cv180zb_wevb_0008a_spinor/partition/partition_spinor.xml
View file @ e955c3f4
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
<partition label="fip" size_in_kb="512" readonly="false" file="fip.bin"/> <partition label="fip" size_in_kb="512" readonly="false" file="fip.bin"/>
<partition label="BOOT" size_in_kb="3072" readonly="false" file="boot.spinor"/> <partition label="BOOT" size_in_kb="3072" readonly="false" file="boot.spinor"/>
<partition label="ENV" size_in_kb="64" file="" /> <partition label="ENV" size_in_kb="64" file="" />
<partition label="ROOTFS" size_in_kb="4032" readonly="false" file="rootfs.spinor" /> <partition label="ROOTFS" size_in_kb="4232" readonly="false" file="rootfs.spinor" />
<partition label="DATA" size_in_kb="512" readonly="false" file="data.spinor" mountpoint="/mnt/data" type="jffs2" /> <partition label="DATA" size_in_kb="312" readonly="false" file="data.spinor" mountpoint="/mnt/data" type="jffs2" />
</physical_partition> </physical_partition>
build/boards/cv180x/cv180zb_wevb_0008a_spinor/u-boot/cvi_board_init.c deleted 120000 → 0
View file @ f0e3f7d1
../../../default/u-boot/cv180x_qfn_cvi_board_init.c
\ No newline at end of file
build/boards/cv180x/cv180zb_wevb_0008a_spinor/u-boot/cvi_board_init.c 0 → 100644
View file @ e955c3f4
int cvi_board_init(void)
{
#if defined(CV180X_QFN_88_PIN)
PINMUX_CONFIG(PAD_MIPI_TXP1, IIC2_SCL);
PINMUX_CONFIG(PAD_MIPI_TXM1, IIC2_SDA);
PINMUX_CONFIG(PAD_MIPI_TXP0, XGPIOC_13);
PINMUX_CONFIG(PAD_MIPI_TXM0, CAM_MCLK1);
#elif defined(CV180X_QFN_88_PIN_38)
//I2C2
PINMUX_CONFIG(PAD_MIPI_TXP1, IIC2_SCL);
PINMUX_CONFIG(PAD_MIPI_TXM1, IIC2_SDA);
//CAM_RST0
PINMUX_CONFIG(PAD_MIPI_TXP2, XGPIOC_17);
PINMUX_CONFIG(PAD_MIPI_TXM2, XGPIOC_16);
//CAM_MCLK0
PINMUX_CONFIG(PAD_MIPI_TXP0, CAM_MCLK0);
PINMUX_CONFIG(PAD_MIPI_TXM0, XGPIOC_12);
//IRCUT
//PINMUX_CONFIG(SD1_D2, PWR_GPIO19);
//PINMUX_CONFIG(SD1_D3, PWR_GPIO18);
#elif defined(CV180X_QFN_68_PIN)
PINMUX_CONFIG(PAD_MIPIRX1P, IIC1_SDA);
PINMUX_CONFIG(PAD_MIPIRX0N, IIC1_SCL);
PINMUX_CONFIG(PAD_MIPIRX1N, XGPIOC_8);
PINMUX_CONFIG(PAD_MIPIRX0P, CAM_MCLK0);
//IRCUT
//PINMUX_CONFIG(SD1_D2, PWR_GPIO19);
//PINMUX_CONFIG(SD1_D3, PWR_GPIO18);
#endif
// pinmux for wifi
pinmux_config(PINMUX_SDIO1);
return 0;
}
build/boards/cv180x/cv180zb_wevb_0008a_spinor/u-boot/cvitek_cv180zb_wevb_0008a_spinor_defconfig deleted 120000 → 0
View file @ f0e3f7d1
../../../default/u-boot/cv180x_wevb_riscv_spinor_defconfig
\ No newline at end of file
build/boards/cv180x/cv180zb_wevb_0008a_spinor/u-boot/cvitek_cv180zb_wevb_0008a_spinor_defconfig 0 → 100644
View file @ e955c3f4
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_DEVICE_TREE="cv180x_asic"
CONFIG_IDENT_STRING=" cvitek_cv180x"
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_TARGET_CVITEK_CV180X=y
CONFIG_CVITEK_SPI_FLASH=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=1
CONFIG_SYS_PROMPT="cv180x_c906# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_ITEST is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_CVI_SD_UPDATE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CVITEK=y
CONFIG_MTD=y
CONFIG_SPI_FLASH_USE_4K_SECTORS=y
CONFIG_PHY_CVITEK=y
CONFIG_PHY_CVITEK_CV182XA=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_LZ4=y
CONFIG_LZMA=y
# CONFIG_TOOLS_LIBCRYPTO is not set
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
build/boards/cv180x/cv180zb_wevb_0008a_spinor/u-boot/cvitek_cv180zb_wevb_0008a_spinor_rls_defconfig
View file @ e955c3f4
...@@ -65,6 +65,7 @@ CONFIG_MMC_SDHCI_SDMA=y ...@@ -65,6 +65,7 @@ CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CVITEK=y CONFIG_MMC_SDHCI_CVITEK=y
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_SPI_FLASH_USE_4K_SECTORS=y CONFIG_SPI_FLASH_USE_4K_SECTORS=y
CONFIG_PHY_CVITEK=y
CONFIG_PHY_CVITEK_CV182XA=y CONFIG_PHY_CVITEK_CV182XA=y
CONFIG_DM_ETH=y CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y CONFIG_ETH_DESIGNWARE=y
......
build/boards/cv181x/cv1811c_wevb_0006a_spinor/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + SPINOR 16MB + BGA SIP 128MB" "board_information": "C906B + SPINOR 16MB + BGA SIP 128MB"
} }
build/boards/cv181x/cv1811h_wevb_0007a_emmc/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + EMMC 512MB + BGA SIP 128MB" "board_information": "C906B + EMMC 512MB + BGA SIP 128MB"
} }
build/boards/cv181x/cv1811h_wevb_0007a_spinand/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + SPINAND 256MB + BGA SIP 128MB" "board_information": "C906B + SPINAND 256MB + BGA SIP 128MB"
} }
build/boards/cv181x/cv1811h_wevb_0007a_spinand/linux/cvitek_cv1811h_wevb_0007a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wevb_0006a_spinand/linux/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1811h_wevb_0007a_spinand/u-boot/cvitek_cv1811h_wevb_0007a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wevb_0006a_spinand/u-boot/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1811h_wevb_0007a_spinor/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + SPINOR 16MB + BGA SIP 128MB" "board_information": "C906B + SPINOR 16MB + BGA SIP 128MB"
} }
build/boards/cv181x/cv1812cp_wevb_0006a_spinand/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + SPINAND 256MB + BGA SIP 256MB" "board_information": "C906B + SPINAND 256MB + BGA SIP 256MB"
} }
build/boards/cv181x/cv1812cp_wevb_0006a_spinand/linux/cvitek_cv1812cp_wevb_0006a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wevb_0006a_spinand/linux/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/config.json 0 → 100755
View file @ e955c3f4
{
"ddr_cfg_list": [
"",
"ddr3_1866_x16",
"ddr3_2133_x16",
"ddr_auto_x16"
],
"board_information": "C906B + EMMC 512MB + BGA SIP 256MB"
}
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/cv1812h_wevb_0007a_emmc_huashan_defconfig 0 → 100755
View file @ e955c3f4
CONFIG_CHIP_cv1812h=y
CONFIG_BOARD_wevb_0007a_emmc_huashan=y
CONFIG_DDR_CFG_ddr3_1866_x16=y
CONFIG_ARCH="riscv"
CONFIG_CROSS_COMPILE="riscv64-unknown-linux-gnu-"
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KERNEL_ENTRY_HACK=y
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
CONFIG_TOOLCHAIN_MUSL_RISCV64=y
CONFIG_FLASH_SIZE_SHRINK=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_emmc=y
CONFIG_SENSOR_GCORE_GC2053=y
CONFIG_SENSOR_GCORE_GC2093=y
CONFIG_SENSOR_GCORE_GC4653=y
CONFIG_SENSOR_SMS_SC3335=y
CONFIG_SENSOR_SMS_SC500AI=y
CONFIG_SENSOR_SONY_IMX307=y
CONFIG_SENSOR_SONY_IMX307_2L=y
CONFIG_SENSOR_SONY_IMX307_SLAVE=y
CONFIG_SENSOR_SONY_IMX327=y
CONFIG_SENSOR_SONY_IMX327_2L=y
CONFIG_SENSOR_SONY_IMX327_SLAVE=y
CONFIG_SENSOR_OV_OS04C10=y
CONFIG_SENSOR_OV_OS04A10=y
CONFIG_SENSOR_OV_OV5647=y
CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y
CONFIG_SKIP_RAMDISK=y
CONFIG_TARGET_PACKAGE_PARTED=y
CONFIG_TARGET_PACKAGE_E2FSPROGS=y
CONFIG_TARGET_PACKAGE_ENVTOOLS=y
# CONFIG_TARGET_PACKAGE_GATORD is not set
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
# CONFIG_ROOTFS_OVERLAYFS is not set
CONFIG_TARGET_PACKAGE_DROPBEAR=y
# CONFIG_TARGET_PACKAGE_MTD-UTILS is not set
# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
CONFIG_ENABLE_FREERTOS=y
CONFIG_ENABLE_RTOS_DUMP_PRINT=y
CONFIG_DUMP_PRINT_SZ_IDX=17
CONFIG_WIFI_ENABLE=y
CONFIG_WIFI_RTL8821CS=y
CONFIG_WIFI_RTL8723DS=y
CONFIG_TP_ENABLE=y
CONFIG_TP_GT9XX=y
CONFIG_TARGET_PACKAGE_ADBD=y
CONFIG_TARGET_PACKAGE_NTP=y
CONFIG_USB_OSDRV_CVITEK_GADGET=y
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/dts_riscv/cv1812h_wevb_0007a_emmc_huashan.dts 0 → 100755
View file @ e955c3f4
/dts-v1/;
#include "cv181x_base_riscv.dtsi"
#include "cv181x_asic_bga.dtsi"
#include "cv181x_asic_emmc.dtsi"
#include "cv181x_default_memmap.dtsi"
#include "cv181x_base.dtsi"
&dac {
/delete-property/ mute-gpio-l;
/delete-property/ mute-gpio-r;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&wifisd {
status = "okay";
};
&mipi_rx {
snsr-reset = <&porta 2 GPIO_ACTIVE_LOW>, <&porta 6 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>;
};
/ {
i2c3: i2c@04030000 {
compatible = "snps,designware-i2c";
clocks = <&clk CV181X_CLK_I2C>;
reg = <0x0 0x04030000 0x0 0x1000>;
clock-frequency = <400000>;
resets = <&rst RST_I2C3>;
reset-names = "i2c3";
interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&plic0>;
gt9xx: gt9xx@14 {
compatible = "goodix,gt9xx";
reg = <0x14>;
status = "okay";
};
};
};
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/memmap.py 0 → 100755
View file @ e955c3f4
SIZE_1M = 0x100000
SIZE_1K = 1024
# Only attributes in class MemoryMap are generated to .h
class MemoryMap:
# No prefix "CVIMMAP_" for the items in _no_prefix[]
_no_prefix = [
"CONFIG_SYS_TEXT_BASE" # u-boot's CONFIG_SYS_TEXT_BASE is used without CPP.
]
DRAM_BASE = 0x80000000
DRAM_SIZE = 256 * SIZE_1M
# ==============
# C906L FreeRTOS
# ==============
FREERTOS_SIZE = 2 * SIZE_1M
# FreeRTOS is at the end of DRAM
FREERTOS_ADDR = DRAM_BASE + DRAM_SIZE - FREERTOS_SIZE
FSBL_C906L_START_ADDR = FREERTOS_ADDR
# ==============================
# OpenSBI | arm-trusted-firmware
# ==============================
# Monitor is at the begining of DRAM
MONITOR_ADDR = DRAM_BASE
ATF_SIZE = 512 * SIZE_1K
OPENSBI_SIZE = 512 * SIZE_1K
OPENSBI_FDT_ADDR = MONITOR_ADDR + OPENSBI_SIZE
# =========================
# memory@DRAM_BASE in .dts.
# =========================
# Ignore the area of FreeRTOS in u-boot and kernel
KERNEL_MEMORY_ADDR = DRAM_BASE
KERNEL_MEMORY_SIZE = DRAM_SIZE - FREERTOS_SIZE
# =================
# Multimedia buffer. Used by u-boot/kernel/FreeRTOS
# =================
ION_SIZE = 175 * SIZE_1M
H26X_BITSTREAM_SIZE = 2 * SIZE_1M
H26X_ENC_BUFF_SIZE = 0
ISP_MEM_BASE_SIZE = 20 * SIZE_1M
FREERTOS_RESERVED_ION_SIZE = H26X_BITSTREAM_SIZE + H26X_ENC_BUFF_SIZE + ISP_MEM_BASE_SIZE
# ION after FreeRTOS
ION_ADDR = FREERTOS_ADDR - ION_SIZE
# Buffers of the fast image are inside the ION buffer
H26X_BITSTREAM_ADDR = ION_ADDR
H26X_ENC_BUFF_ADDR = H26X_BITSTREAM_ADDR + H26X_BITSTREAM_SIZE
ISP_MEM_BASE_ADDR = H26X_ENC_BUFF_ADDR + H26X_ENC_BUFF_SIZE
assert ISP_MEM_BASE_ADDR + ISP_MEM_BASE_SIZE <= ION_ADDR + ION_SIZE
# Boot logo is after the ION buffer
# Framebuffer uses boot logo's reserved memory
BOOTLOGO_SIZE = 1800 * SIZE_1K
BOOTLOGO_ADDR = ION_ADDR - BOOTLOGO_SIZE
FRAMEBUFFER_SIZE = BOOTLOGO_SIZE
FRAMEBUFFER_ADDR = BOOTLOGO_ADDR
# ===================
# FSBL and u-boot-2021
# ===================
CVI_UPDATE_HEADER_SIZE = SIZE_1K
UIMAG_SIZE = 16 * SIZE_1M
# kernel image loading buffer
UIMAG_ADDR = DRAM_BASE + 24 * SIZE_1M
CVI_UPDATE_HEADER_ADDR = UIMAG_ADDR - CVI_UPDATE_HEADER_SIZE
# FSBL decompress buffer
FSBL_UNZIP_ADDR = UIMAG_ADDR
FSBL_UNZIP_SIZE = UIMAG_SIZE
assert UIMAG_ADDR + UIMAG_SIZE <= BOOTLOGO_ADDR
# u-boot's run address and entry point
CONFIG_SYS_TEXT_BASE = DRAM_BASE + 2 * SIZE_1M
# u-boot's init stack point is only used before board_init_f()
CONFIG_SYS_INIT_SP_ADDR = UIMAG_ADDR + UIMAG_SIZE
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/partition/partition_emmc.xml 0 → 100755
View file @ e955c3f4
<physical_partition type="emmc">
<partition label="BOOT" size_in_kb="8192" file="boot.emmc" />
<partition label="MISC" size_in_kb="512" file="logo.jpg" />
<!-- Beware that in emmc u-boot environment should be 0x40000 alignment -->
<partition label="ENV" size_in_kb="128" file="" />
<partition label="ROOTFS" size_in_kb="70656" file="rootfs.emmc" />
<partition label="SYSTEM" size_in_kb="40960" file="system.emmc" type="ext4" />
<partition label="CFG" size_in_kb="15240" file="cfg.emmc" mountpoint="/mnt/cfg" type="ext4" />
<partition label="DATA" size_in_kb="3145728" file="" mountpoint="/mnt/data" type="ext4"/>
</physical_partition>
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/rootfs_script/clean_rootfs.sh 0 → 100755
View file @ e955c3f4
#!/bin/bash
SYSTEM_DIR=$1
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libcvi*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libmad*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libmp3*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libopencv*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libopencv*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvi_rtsp.so
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libcvi_rtsp.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvikernel.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/*.a
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libgst*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libg*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/gstreamer-1.0/libgst*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libcrypto.so*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libssl.so*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libcvi_protobuf.so*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libprotobuf-lite.so*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcviai*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvi_ispd.so*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libraw_replay.so*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvi_ive_tpu.so*
rm -rf $SYSTEM_DIR/mnt/system/usr/lib/gio
rm -rf $SYSTEM_DIR/mnt/system/usr/lib/glib*
rm -rf $SYSTEM_DIR/mnt/system/usr/lib/gstreamer-1.0*
rm -rf $SYSTEM_DIR/mnt/system/usr/libexec*
rm -rf $SYSTEM_DIR/mnt/system/usr/bin
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvimath.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcviruntime.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcnpy.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcipher.so
rm -f $SYSTEM_DIR/mnt/system/lib/libcipher.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libcvi_ispd.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libraw_replay.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libmad.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libmp3*
rm -f $SYSTEM_DIR/mnt/system/lib/libnanomsg*
#del 3rdparty lib
#del thttpd/libwebsockets lib
rm -f $SYSTEM_DIR/mnt/system/lib/libthttpd*
rm -f $SYSTEM_DIR/mnt/system/lib/libwebsocket*
if [ $SDK_VER = "uclibc" ]
then
#del opencv lib
rm -f $SYSTEM_DIR/mnt/system/lib/libopencv*
#del ffmpeg lib
rm -f $SYSTEM_DIR/mnt/system/lib/libav*
#save /mnt/system/lib/ openssl lib; need by ntpdate/wpa_supplicant
else
#glibc ramdisk(rootfs/common_arm/usr/lib/) has libcrypto.so and libssl.so
#del openssl
rm -f $SYSTEM_DIR/mnt/system/lib/libssl*
fi
rm -rf $SYSTEM_DIR/etc/init.d/S23ntp
rm -rf $SYSTEM_DIR/bin/ntpd
du -sh $SYSTEM_DIR/* |sort -rh
du -sh $SYSTEM_DIR/mnt/* |sort -rh
du -sh $SYSTEM_DIR/mnt/system/* |sort -rh
du -sh $SYSTEM_DIR/mnt/system/lib/* |sort -rh
du -sh $SYSTEM_DIR/mnt/system/data/install/* |sort -rh
du -sh $SYSTEM_DIR/usr/* |sort -rh
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/u-boot/cvi_board_init.c 0 → 100755
View file @ e955c3f4
static void set_rtc_register_for_power(void)
{
printf("set_rtc_register_for_power\n");
mmio_write_32(0x050250AC, 0x2);
mmio_write_32(0x050260D0, 0x3);
mmio_write_32(0x03001098, 0x0);
mmio_write_32(0x0300109C, 0x0);
mmio_write_32(0x03001090, 0x0);
mmio_write_32(0x03001094, 0x0);
mmio_write_32(0x05027084, 0x0);
mmio_write_32(0x05027088, 0x0);
mmio_write_32(0x0502708C, 0x0);
mmio_write_32(0x05027090, 0x0);
mmio_write_32(0x050260BC, 0x1700);
mmio_write_32(0x05026128, 0x0);
}
int cvi_board_init(void)
{
/*touch panel*/
PINMUX_CONFIG(IIC0_SCL, XGPIOA_28);
PINMUX_CONFIG(IIC0_SDA, XGPIOA_29);
PINMUX_CONFIG(VIVO_D9, XGPIOB_12);
PINMUX_CONFIG(VIVO_D8, XGPIOB_13);
//#########WIFI
pinmux_config(PINMUX_SDIO1);
PINMUX_CONFIG(AUX0, XGPIOA_30);
mmio_write_32(0x03020004, mmio_read_32(0x03020004) | 0x40000000);
mmio_write_32(0x03020000, mmio_read_32(0x03020000) | 0x40000000);
PINMUX_CONFIG(VIVO_D3, UART2_RTS);
PINMUX_CONFIG(VIVO_D4, UART2_CTS);
PINMUX_CONFIG(VIVO_D9, UART2_RX);
PINMUX_CONFIG(VIVO_D10, UART2_TX);
//########LT9611 IIC4
PINMUX_CONFIG(ADC3,IIC4_SCL);
PINMUX_CONFIG(ADC2,IIC4_SDA);
PINMUX_CONFIG(USB_VBUS_EN, XGPIOB_5);
PINMUX_CONFIG(PAD_MIPIRX5N, XGPIOC_0);
//#######sensor
PINMUX_CONFIG(IIC2_SDA, IIC2_SDA);
PINMUX_CONFIG(IIC2_SCL, IIC2_SCL);
//Sensor PWDN PIN
PINMUX_CONFIG(CAM_PD0, XGPIOA_1);
PINMUX_CONFIG(CAM_PD1, XGPIOA_4);
mmio_write_32(0x03020004, mmio_read_32(0x03020004) | 0x2);
mmio_write_32(0x03020000, mmio_read_32(0x03020000) | 0x2);
mmio_write_32(0x03020004, mmio_read_32(0x03020004) | 0x10);
mmio_write_32(0x03020000, mmio_read_32(0x03020000) | 0x10);
//Sensor Reset PIN
PINMUX_CONFIG(CAM_RST0, XGPIOA_2);
PINMUX_CONFIG(IIC3_SDA, XGPIOA_6);
//Sensor Clock PIN
PINMUX_CONFIG(CAM_MCLK0, CAM_MCLK0);
PINMUX_CONFIG(CAM_MCLK1, CAM_MCLK1);
//Resolve I2C3 Conflict problem
PINMUX_CONFIG(IIC3_SCL, XGPIOA_5);
//#######tp
PINMUX_CONFIG(VIVO_D1, IIC3_SDA);
PINMUX_CONFIG(VIVO_D0, IIC3_SCL);
PINMUX_CONFIG(JTAG_CPU_TMS, XGPIOA_19);
PINMUX_CONFIG(JTAG_CPU_TCK, XGPIOA_18);
//########panel
PINMUX_CONFIG(JTAG_CPU_TRST, XGPIOA_20);
pinmux_config(PINMUX_DSI);
PINMUX_CONFIG(PWR_GPIO0, PWR_GPIO_0);
//######## usb
PINMUX_CONFIG(USB_VBUS_DET, XGPIOB_6);
set_rtc_register_for_power();
return 0;
}
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/u-boot/cvitek.h 0 → 100755
View file @ e955c3f4
/*
*VO control GPIOs
*/
#define VO_GPIO_RESET_PORT portb
#define VO_GPIO_RESET_INDEX 5
#define VO_GPIO_RESET_ACTIVE GPIO_ACTIVE_LOW
#define VO_GPIO_PWM_PORT portb
#define VO_GPIO_PWM_INDEX 4
#define VO_GPIO_PWM_ACTIVE GPIO_ACTIVE_HIGH
#define VO_GPIO_POWER_CT_PORT portb
#define VO_GPIO_POWER_CT_INDEX 3
#define VO_GPIO_POWER_CT_ACTIVE GPIO_ACTIVE_HIGH
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/u-boot/cvitek_cv1812h_wevb_0007a_emmc_huashan_defconfig 0 → 100755
View file @ e955c3f4
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_DEVICE_TREE="cv181x_asic"
CONFIG_IDENT_STRING=" cvitek_cv181x"
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_TARGET_CVITEK_CV181X=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=1
CONFIG_SYS_PROMPT="cv181x_c906# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_ITEST is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_CVI_SD_UPDATE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CVITEK=y
CONFIG_MTD=y
# CONFIG_PHY_SMSC is not set
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY_CVITEK_CV182XA=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_LZ4=y
CONFIG_LZMA=y
# CONFIG_TOOLS_LIBCRYPTO is not set
CONFIG_ENV_IS_IN_MMC=y
build/boards/cv181x/cv1812h_wevb_0007a_spinand/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + SPINAND 256MB + BGA SIP 128MB" "board_information": "C906B + SPINAND 256MB + BGA SIP 128MB"
} }
build/boards/cv181x/cv1812h_wevb_0007a_spinand/linux/cvitek_cv1812h_wevb_0007a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wevb_0006a_spinand/linux/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_spinand/u-boot/cvitek_cv1812h_wevb_0007a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wevb_0006a_spinand/u-boot/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/config.json 0 → 100644
View file @ e955c3f4
{
"ddr_cfg_list": [
"",
"ddr3_1866_x16",
"ddr3_2133_x16",
"ddr_auto_x16"
],
"board_information": "C906B + SPINAND 256MB + BGA SIP 128MB"
}
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/cv1812h_wevb_0007a_spinand_huashan_defconfig 0 → 100644
View file @ e955c3f4
CONFIG_CHIP_cv1812h=y
CONFIG_BOARD_wevb_0007a_spinand_huashan=y
CONFIG_DDR_CFG_ddr3_1866_x16=y
CONFIG_ARCH="riscv"
CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KERNEL_ENTRY_HACK=y
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
CONFIG_TOOLCHAIN_MUSL_RISCV64=y
CONFIG_FLASH_SIZE_SHRINK=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_spinand=y
CONFIG_SENSOR_GCORE_GC4653=y
CONFIG_SENSOR_SMS_SC3335=y
CONFIG_SENSOR_SMS_SC500AI=y
CONFIG_SENSOR_SONY_IMX307=y
CONFIG_SENSOR_SONY_IMX307_2L=y
CONFIG_SENSOR_SONY_IMX307_SLAVE=y
CONFIG_SENSOR_SONY_IMX327=y
CONFIG_SENSOR_SONY_IMX327_2L=y
CONFIG_SENSOR_SONY_IMX327_SLAVE=y
CONFIG_SENSOR_OV_OS04C10=y
CONFIG_SENSOR_OV_OS04A10=y
CONFIG_SENSOR_OV_OV5647=y
CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y
CONFIG_SKIP_RAMDISK=y
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
# CONFIG_ROOTFS_OVERLAYFS is not set
# CONFIG_TARGET_PACKAGE_CVITRACER is not set
# CONFIG_TARGET_PACKAGE_GDBSERVER is not set
# CONFIG_TARGET_PACKAGE_LIBCRYPTO is not set
# CONFIG_TARGET_PACKAGE_LIBZ is not set
# CONFIG_TARGET_PACKAGE_OTASERVER is not set
# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
# CONFIG_TARGET_PACKAGE_GATORD is not set
CONFIG_TARGET_PACKAGE_DROPBEAR=y
CONFIG_ENABLE_FREERTOS=y
CONFIG_ENABLE_RTOS_DUMP_PRINT=y
CONFIG_DUMP_PRINT_SZ_IDX=17
CONFIG_WIFI_ENABLE=y
CONFIG_WIFI_RTL8821CS=y
CONFIG_WIFI_RTL8723DS=y
CONFIG_TP_ENABLE=y
CONFIG_TP_GT9XX=y
CONFIG_TARGET_PACKAGE_ADBD=y
CONFIG_TARGET_PACKAGE_NTP=y
CONFIG_TARGET_PACKAGE_CRONTABS=y
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/dts_riscv/cv1812h_wevb_0007a_spinand_huashan.dts 0 → 100644
View file @ e955c3f4
/dts-v1/;
#include "cv181x_base_riscv.dtsi"
#include "cv181x_asic_bga.dtsi"
#include "cv181x_asic_spinand.dtsi"
#include "cv181x_default_memmap.dtsi"
/ {
};
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/memmap.py 0 → 100755
View file @ e955c3f4
SIZE_1M = 0x100000
SIZE_1K = 1024
# Only attributes in class MemoryMap are generated to .h
class MemoryMap:
# No prefix "CVIMMAP_" for the items in _no_prefix[]
_no_prefix = [
"CONFIG_SYS_TEXT_BASE" # u-boot's CONFIG_SYS_TEXT_BASE is used without CPP.
]
DRAM_BASE = 0x80000000
DRAM_SIZE = 256 * SIZE_1M
# ==============
# C906L FreeRTOS
# ==============
FREERTOS_SIZE = 2 * SIZE_1M
# FreeRTOS is at the end of DRAM
FREERTOS_ADDR = DRAM_BASE + DRAM_SIZE - FREERTOS_SIZE
FSBL_C906L_START_ADDR = FREERTOS_ADDR
# ==============================
# OpenSBI | arm-trusted-firmware
# ==============================
# Monitor is at the begining of DRAM
MONITOR_ADDR = DRAM_BASE
ATF_SIZE = 512 * SIZE_1K
OPENSBI_SIZE = 512 * SIZE_1K
OPENSBI_FDT_ADDR = MONITOR_ADDR + OPENSBI_SIZE
# =========================
# memory@DRAM_BASE in .dts.
# =========================
# Ignore the area of FreeRTOS in u-boot and kernel
KERNEL_MEMORY_ADDR = DRAM_BASE
KERNEL_MEMORY_SIZE = DRAM_SIZE - FREERTOS_SIZE
# =================
# Multimedia buffer. Used by u-boot/kernel/FreeRTOS
# =================
ION_SIZE = 170 * SIZE_1M
H26X_BITSTREAM_SIZE = 2 * SIZE_1M
H26X_ENC_BUFF_SIZE = 0
ISP_MEM_BASE_SIZE = 20 * SIZE_1M
FREERTOS_RESERVED_ION_SIZE = H26X_BITSTREAM_SIZE + H26X_ENC_BUFF_SIZE + ISP_MEM_BASE_SIZE
# ION after FreeRTOS
ION_ADDR = FREERTOS_ADDR - ION_SIZE
# Buffers of the fast image are inside the ION buffer
H26X_BITSTREAM_ADDR = ION_ADDR
H26X_ENC_BUFF_ADDR = H26X_BITSTREAM_ADDR + H26X_BITSTREAM_SIZE
ISP_MEM_BASE_ADDR = H26X_ENC_BUFF_ADDR + H26X_ENC_BUFF_SIZE
assert ISP_MEM_BASE_ADDR + ISP_MEM_BASE_SIZE <= ION_ADDR + ION_SIZE
# Boot logo is after the ION buffer
# Framebuffer uses boot logo's reserved memory
BOOTLOGO_SIZE = 1800 * SIZE_1K
BOOTLOGO_ADDR = ION_ADDR - BOOTLOGO_SIZE
FRAMEBUFFER_SIZE = BOOTLOGO_SIZE
FRAMEBUFFER_ADDR = BOOTLOGO_ADDR
# ===================
# FSBL and u-boot-2021
# ===================
CVI_UPDATE_HEADER_SIZE = SIZE_1K
UIMAG_SIZE = 16 * SIZE_1M
# kernel image loading buffer
UIMAG_ADDR = DRAM_BASE + 24 * SIZE_1M
CVI_UPDATE_HEADER_ADDR = UIMAG_ADDR - CVI_UPDATE_HEADER_SIZE
# FSBL decompress buffer
FSBL_UNZIP_ADDR = UIMAG_ADDR
FSBL_UNZIP_SIZE = UIMAG_SIZE
assert UIMAG_ADDR + UIMAG_SIZE <= BOOTLOGO_ADDR
# u-boot's run address and entry point
CONFIG_SYS_TEXT_BASE = DRAM_BASE + 2 * SIZE_1M
# u-boot's init stack point is only used before board_init_f()
CONFIG_SYS_INIT_SP_ADDR = UIMAG_ADDR + UIMAG_SIZE
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/partition/partition_spinand.xml 0 → 120000
View file @ e955c3f4
../../../default/partition/partition_spinand_page_2k.xml
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/rootfs_script/clean_rootfs.sh 0 → 100755
View file @ e955c3f4
#!/bin/bash
SYSTEM_DIR=$1
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libz*
rm -f $SYSTEM_DIR/mnt/system/lib/libz*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libcvi*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libmad*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libmp3*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/3rd/libopencv*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libopencv*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvi_rtsp.so
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libcvi_rtsp.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvikernel.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/*.a
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libgst*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libg*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/gstreamer-1.0/libgst*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libcrypto.so*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libssl.so*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libcvi_protobuf.so*
rm -f $SYSTEM_DIR/mnt/system/data/install/lib/libprotobuf-lite.so*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcviai*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvi_ispd.so*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libraw_replay.so*
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvi_ive_tpu.so*
rm -rf $SYSTEM_DIR/mnt/system/usr/lib/gio
rm -rf $SYSTEM_DIR/mnt/system/usr/lib/glib*
rm -rf $SYSTEM_DIR/mnt/system/usr/lib/gstreamer-1.0*
rm -rf $SYSTEM_DIR/mnt/system/usr/libexec*
rm -rf $SYSTEM_DIR/mnt/system/usr/bin
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcvimath.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcviruntime.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcnpy.so
rm -f $SYSTEM_DIR/mnt/system/usr/lib/libcipher.so
rm -f $SYSTEM_DIR/mnt/system/lib/libcipher.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libcvi_ispd.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libraw_replay.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libmad.so*
rm -f $SYSTEM_DIR/mnt/system/lib/libmp3*
rm -f $SYSTEM_DIR/mnt/system/lib/libnanomsg*
#del 3rdparty lib
#del thttpd/libwebsockets lib
rm -f $SYSTEM_DIR/mnt/system/lib/libthttpd*
rm -f $SYSTEM_DIR/mnt/system/lib/libwebsocket*
if [ $SDK_VER = "uclibc" ]
then
#del opencv lib
rm -f $SYSTEM_DIR/mnt/system/lib/libopencv*
#del ffmpeg lib
rm -f $SYSTEM_DIR/mnt/system/lib/libav*
#save /mnt/system/lib/ openssl lib; need by ntpdate/wpa_supplicant
else
#glibc ramdisk(rootfs/common_arm/usr/lib/) has libcrypto.so and libssl.so
#del openssl
rm -f $SYSTEM_DIR/mnt/system/lib/libssl*
rm -f $SYSTEM_DIR/mnt/system/lib/libcrypto*
fi
rm -rf $SYSTEM_DIR/etc/init.d/S23ntp
rm -rf $SYSTEM_DIR/bin/ntpd
du -sh $SYSTEM_DIR/* |sort -rh
du -sh $SYSTEM_DIR/mnt/* |sort -rh
du -sh $SYSTEM_DIR/mnt/system/* |sort -rh
du -sh $SYSTEM_DIR/mnt/system/lib/* |sort -rh
du -sh $SYSTEM_DIR/mnt/system/data/install/* |sort -rh
du -sh $SYSTEM_DIR/usr/* |sort -rh
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/u-boot/cvi_board_init.c 0 → 100644
View file @ e955c3f4
int cvi_board_init(void)
{
PINMUX_CONFIG(CAM_MCLK0, CAM_MCLK0);
PINMUX_CONFIG(IIC3_SCL, IIC3_SCL);
PINMUX_CONFIG(IIC3_SDA, IIC3_SDA);
PINMUX_CONFIG(IIC2_SCL, IIC2_SCL);
PINMUX_CONFIG(IIC2_SDA, IIC2_SDA);
return 0;
}
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/u-boot/cvitek.h 0 → 100644
View file @ e955c3f4
/*
*VO control GPIOs
*/
#define VO_GPIO_RESET_PORT portb
#define VO_GPIO_RESET_INDEX 5
#define VO_GPIO_RESET_ACTIVE GPIO_ACTIVE_LOW
#define VO_GPIO_PWM_PORT portb
#define VO_GPIO_PWM_INDEX 4
#define VO_GPIO_PWM_ACTIVE GPIO_ACTIVE_HIGH
#define VO_GPIO_POWER_CT_PORT portb
#define VO_GPIO_POWER_CT_INDEX 3
#define VO_GPIO_POWER_CT_ACTIVE GPIO_ACTIVE_HIGH
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/u-boot/cvitek_cv1812h_wevb_0007a_spinand_huashan_defconfig 0 → 100644
View file @ e955c3f4
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_DEVICE_TREE="cv181x_asic"
CONFIG_IDENT_STRING=" cvitek_cv181x"
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_TARGET_CVITEK_CV181X=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=1
CONFIG_SYS_PROMPT="cv181x_c906# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_ITEST is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_CVI_SD_UPDATE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CVITEK=y
CONFIG_MTD=y
# CONFIG_SPI_FLASH is not set
# CONFIG_PHY_SMSC is not set
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY_CVITEK=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_LZ4=y
CONFIG_LZMA=y
# CONFIG_TOOLS_LIBCRYPTO is not set
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_FLASH_CVSNFC_V3=y
CONFIG_ENV_IS_IN_NAND=y
build/boards/cv181x/cv1812h_wevb_0007a_spinor/config.json
View file @ e955c3f4
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
"", "",
"ddr3_1866_x16", "ddr3_1866_x16",
"ddr3_2133_x16", "ddr3_2133_x16",
"ddr_auto_x16" "ddr_auto_x16"
], ],
"board_information": "C906B + SPINOR 16MB + BGA SIP 256MB" "board_information": "C906B + SPINOR 16MB + BGA SIP 256MB"
} }
build/boards/cv181x/cv1812h_wevb_0007a_spinor/cv1812h_wevb_0007a_spinor_defconfig
View file @ e955c3f4
...@@ -105,10 +105,10 @@ CONFIG_NANDFLASH_PAGESIZE=2048 ...@@ -105,10 +105,10 @@ CONFIG_NANDFLASH_PAGESIZE=2048
# #
# Sensor support list # Sensor support list
# #
# CONFIG_SENSOR_GCORE_GC2053 is not set CONFIG_SENSOR_GCORE_GC2053=y
# CONFIG_SENSOR_GCORE_GC2053_1L is not set CONFIG_SENSOR_GCORE_GC2053_1L=y
# CONFIG_SENSOR_GCORE_GC2053_SLAVE is not set # CONFIG_SENSOR_GCORE_GC2053_SLAVE is not set
# CONFIG_SENSOR_GCORE_GC2093 is not set CONFIG_SENSOR_GCORE_GC2093=y
# CONFIG_SENSOR_GCORE_GC2093_SLAVE is not set # CONFIG_SENSOR_GCORE_GC2093_SLAVE is not set
CONFIG_SENSOR_GCORE_GC4653=y CONFIG_SENSOR_GCORE_GC4653=y
# CONFIG_SENSOR_GCORE_GC4653_SLAVE is not set # CONFIG_SENSOR_GCORE_GC4653_SLAVE is not set
...@@ -131,6 +131,7 @@ CONFIG_SENSOR_GCORE_GC4653=y ...@@ -131,6 +131,7 @@ CONFIG_SENSOR_GCORE_GC4653=y
# CONFIG_SENSOR_SMS_SC035GS is not set # CONFIG_SENSOR_SMS_SC035GS is not set
# CONFIG_SENSOR_SMS_SC035GS_1L is not set # CONFIG_SENSOR_SMS_SC035GS_1L is not set
# CONFIG_SENSOR_SMS_SC200AI is not set # CONFIG_SENSOR_SMS_SC200AI is not set
CONFIG_SENSOR_SMS_SC2336=y
CONFIG_SENSOR_SMS_SC3335=y CONFIG_SENSOR_SMS_SC3335=y
# CONFIG_SENSOR_SMS_SC3335_SLAVE is not set # CONFIG_SENSOR_SMS_SC3335_SLAVE is not set
# CONFIG_SENSOR_SMS_SC3336 is not set # CONFIG_SENSOR_SMS_SC3336 is not set
......
build/boards/cv181x/cv1812h_wevb_0007a_spinor/linux/cvitek_cv1812h_wevb_0007a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wdmb_0006a_spinor/linux/cvitek_cv1811c_wdmb_0006a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_spinor/u-boot/cvitek_cv1812h_wevb_0007a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wdmb_0006a_spinor/u-boot/cvitek_cv1811c_wdmb_0006a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1813h_wevb_0007a_spinand/linux/cvitek_cv1813h_wevb_0007a_spinand_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wevb_0006a_spinand/linux/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1813h_wevb_0007a_spinor/cv1813h_wevb_0007a_spinor_defconfig
View file @ e955c3f4
...@@ -105,10 +105,10 @@ CONFIG_NANDFLASH_PAGESIZE=2048 ...@@ -105,10 +105,10 @@ CONFIG_NANDFLASH_PAGESIZE=2048
# #
# Sensor support list # Sensor support list
# #
# CONFIG_SENSOR_GCORE_GC2053 is not set CONFIG_SENSOR_GCORE_GC2053=y
# CONFIG_SENSOR_GCORE_GC2053_1L is not set CONFIG_SENSOR_GCORE_GC2053_1L=y
# CONFIG_SENSOR_GCORE_GC2053_SLAVE is not set # CONFIG_SENSOR_GCORE_GC2053_SLAVE is not set
# CONFIG_SENSOR_GCORE_GC2093 is not set CONFIG_SENSOR_GCORE_GC2093=y
# CONFIG_SENSOR_GCORE_GC2093_SLAVE is not set # CONFIG_SENSOR_GCORE_GC2093_SLAVE is not set
CONFIG_SENSOR_GCORE_GC4653=y CONFIG_SENSOR_GCORE_GC4653=y
# CONFIG_SENSOR_GCORE_GC4653_SLAVE is not set # CONFIG_SENSOR_GCORE_GC4653_SLAVE is not set
...@@ -131,6 +131,7 @@ CONFIG_SENSOR_GCORE_GC4653=y ...@@ -131,6 +131,7 @@ CONFIG_SENSOR_GCORE_GC4653=y
# CONFIG_SENSOR_SMS_SC035GS is not set # CONFIG_SENSOR_SMS_SC035GS is not set
# CONFIG_SENSOR_SMS_SC035GS_1L is not set # CONFIG_SENSOR_SMS_SC035GS_1L is not set
# CONFIG_SENSOR_SMS_SC200AI is not set # CONFIG_SENSOR_SMS_SC200AI is not set
CONFIG_SENSOR_SMS_SC2336=y
CONFIG_SENSOR_SMS_SC3335=y CONFIG_SENSOR_SMS_SC3335=y
# CONFIG_SENSOR_SMS_SC3335_SLAVE is not set # CONFIG_SENSOR_SMS_SC3335_SLAVE is not set
# CONFIG_SENSOR_SMS_SC3336 is not set # CONFIG_SENSOR_SMS_SC3336 is not set
......
build/boards/cv181x/cv1813h_wevb_0007a_spinor/linux/cvitek_cv1813h_wevb_0007a_spinor_rls_defconfig 0 → 120000
View file @ e955c3f4
../../cv1811c_wdmb_0006a_spinor/linux/cvitek_cv1811c_wdmb_0006a_spinor_rls_defconfig
\ No newline at end of file
build/boards/cv181x/cv1813h_wevb_0007a_spinor/memmap.py
View file @ e955c3f4
...@@ -40,7 +40,7 @@ class MemoryMap: ...@@ -40,7 +40,7 @@ class MemoryMap:
# ================= # =================
# Multimedia buffer. Used by u-boot/kernel/FreeRTOS # Multimedia buffer. Used by u-boot/kernel/FreeRTOS
# ================= # =================
ION_SIZE = 75 * SIZE_1M ION_SIZE = 400 * SIZE_1M
H26X_BITSTREAM_SIZE = 2 * SIZE_1M H26X_BITSTREAM_SIZE = 2 * SIZE_1M
H26X_ENC_BUFF_SIZE = 0 H26X_ENC_BUFF_SIZE = 0
ISP_MEM_BASE_SIZE = 20 * SIZE_1M ISP_MEM_BASE_SIZE = 20 * SIZE_1M
......
build/boards/default/dts/cv180x/cv180x_asic_qfn.dtsi
View file @ e955c3f4
...@@ -50,53 +50,6 @@ ...@@ -50,53 +50,6 @@
}; };
}; };
&i2c0 {
/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
scl-pinmux = <0x0300104c 0x4 0x3>; // IIC0_SCL/IIC0_SCL/XGPIOA[28]
sda-pinmux = <0x03001050 0x4 0x3>; // IIC0_SDA/IIC0_SDA/XGPIOA[29]
/* gpio port */
scl-gpios = <&porta 28 GPIO_ACTIVE_HIGH>;
sda-gpios = <&porta 29 GPIO_ACTIVE_HIGH>;
};
&i2c1 {
/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
scl-pinmux = <0x030010f4 0x4 0x3>; // PAD_MIPIRX0N/IIC1_SCL/XGPIOC[10]
sda-pinmux = <0x030010f0 0x4 0x3>; // PAD_MIPIRX1P/IIC1_SDA/XGPIOC[9]
/* gpio port */
scl-gpios = <&portc 10 GPIO_ACTIVE_HIGH>;
sda-gpios = <&portc 9 GPIO_ACTIVE_HIGH>;
};
&i2c2 {
/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
scl-pinmux = <0x03001108 0x4 0x3>; // PAD_MIPI_TXP1/IIC2_SCL/XGPIOC[15]
sda-pinmux = <0x03001104 0x4 0x3>; // PAD_MIPI_TXM1/IIC2_SDA/XGPIOC[14]
/* gpio port */
scl-gpios = <&portc 15 GPIO_ACTIVE_HIGH>;
sda-gpios = <&portc 14 GPIO_ACTIVE_HIGH>;
};
&i2c3 {
/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
scl-pinmux = <0x0300109c 0x2 0x3>; // SD1_CMD/IIC3_SCL/PWR_GPIO[22]
sda-pinmux = <0x030010a0 0x2 0x3>; // SD1_CLK/IIC3_SDA/PWR_GPIO[23]
/* gpio port */
scl-gpios = <&porte 22 GPIO_ACTIVE_HIGH>;
sda-gpios = <&porte 23 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
&i2c4 {
/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
scl-pinmux = <0x030010e4 0x5 0x3>; // PAD_MIPIRX2N/IIC4_SCL/XGPIOC[6]
sda-pinmux = <0x030010e8 0x5 0x3>; // PAD_MIPIRX2P/IIC4_SDA/XGPIOC[7]
/* gpio port */
scl-gpios = <&portc 6 GPIO_ACTIVE_HIGH>;
sda-gpios = <&portc 7 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
/ { / {
/delete-node/ wifi-sd@4320000; /delete-node/ wifi-sd@4320000;
/delete-node/ i2s@04110000; /delete-node/ i2s@04110000;
......
build/cvisetup.sh
View file @ e955c3f4
...@@ -268,7 +268,11 @@ function build_middleware() ...@@ -268,7 +268,11 @@ function build_middleware()
cp -af "$MW_PATH"/lib/3rd/*.so* "$SYSTEM_OUT_DIR"/lib cp -af "$MW_PATH"/lib/3rd/*.so* "$SYSTEM_OUT_DIR"/lib
# copy ko # copy ko
mkdir -p "$SYSTEM_OUT_DIR"/ko mkdir -p "$SYSTEM_OUT_DIR"/ko
if [[ "$BUILD_FOR_DEBUG" != "y" ]]; then
cp -af "$MW_PATH"/ko_shrink/* "$SYSTEM_OUT_DIR"/ko/
else
cp -af "$MW_PATH"/ko/* "$SYSTEM_OUT_DIR"/ko/ cp -af "$MW_PATH"/ko/* "$SYSTEM_OUT_DIR"/ko/
fi
# add sdk version # add sdk version
echo "SDK_VERSION=${SDK_VER}" > "$SYSTEM_OUT_DIR"/sdk-release echo "SDK_VERSION=${SDK_VER}" > "$SYSTEM_OUT_DIR"/sdk-release
......
build/sensors/sensor_list.json
View file @ e955c3f4
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
"sensor_list": [ "sensor_list": [
"BRIGATES_BG0808", "BRIGATES_BG0808",
"GCORE_GC02M1", "GCORE_GC02M1",
"GCORE_GC0329",
"GCORE_GC1054", "GCORE_GC1054",
"GCORE_GC2053", "GCORE_GC2053",
"GCORE_GC2053_1L", "GCORE_GC2053_1L",
...@@ -12,6 +13,7 @@ ...@@ -12,6 +13,7 @@
"GCORE_GC4023", "GCORE_GC4023",
"GCORE_GC4653", "GCORE_GC4653",
"GCORE_GC4653_SLAVE", "GCORE_GC4653_SLAVE",
"IMGDS_MIS2008",
"NEXTCHIP_N5", "NEXTCHIP_N5",
"NEXTCHIP_N6", "NEXTCHIP_N6",
"OV_OS02D10", "OV_OS02D10",
...@@ -73,6 +75,7 @@ ...@@ -73,6 +75,7 @@
"SONY_IMX347", "SONY_IMX347",
"SONY_IMX385", "SONY_IMX385",
"TECHPOINT_TP2850", "TECHPOINT_TP2850",
"TECHPOINT_TP2863",
"VIVO_MCS369", "VIVO_MCS369",
"VIVO_MCS369Q", "VIVO_MCS369Q",
"VIVO_MCS308M2" "VIVO_MCS308M2"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment