reorganize the configuration files of each board

build/boards/cv180x/cv1800b_milkv_duo_sd/cv1800b_milkv_duo_sd_defconfig

@@ -2,43 +2,113 @@ CONFIG_CHIP_cv1800b=y
 CONFIG_BOARD_milkv_duo_sd=y
 CONFIG_DDR_CFG_ddr2_1333_x16=y
 CONFIG_ARCH="riscv"
+
+#
+# Compile-time checks and compiler options
+#
 CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
+CONFIG_CROSS_COMPILE_KERNEL="riscv64-unknown-linux-musl-"
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KERNEL_ENTRY_HACK=y
 CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
+# end of Compile-time checks and compiler options
+
+#
+# SDK options
+#
 CONFIG_TOOLCHAIN_MUSL_RISCV64=y
+CONFIG_CROSS_COMPILE_SDK="riscv64-unknown-linux-musl-"
+CONFIG_MW_VER="v2"
+CONFIG_SDK_VER="musl_riscv64"
+CONFIG_BUILD_FOR_DEBUG=y
 CONFIG_FLASH_SIZE_SHRINK=y
-CONFIG_NO_FB=y
-CONFIG_NO_TP=y
-CONFIG_DDR_64MB_SIZE=y
 CONFIG_BOOT_IMAGE_SINGLE_DTB=y
+CONFIG_DDR_64MB_SIZE=y
+# end of SDK options
+
+#
+# FIP setting
+#
+CONFIG_FIP_V2=y
+# end of FIP setting
+
+#
+# Storage settings
+#
 CONFIG_STORAGE_TYPE_sd=y
-CONFIG_SENSOR_TUNING_PARAM_cv180x_src_sms_sc200ai=y
-CONFIG_SENSOR_SMS_SC200AI=y
+CONFIG_STORAGE_TYPE="sd"
+CONFIG_NANDFLASH_BLOCKSIZE=131072
+CONFIG_NANDFLASH_PAGESIZE=2048
+# end of Storage settings
+
+#
+# Sensor settings
+#
+
+#
+# Sensor support list
+#
 CONFIG_SENSOR_GCORE_GC2053=y
 CONFIG_SENSOR_GCORE_GC2083=y
-CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_GCORE_GC4653=y
 CONFIG_SENSOR_OV_OV5647=y
+CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_SMS_SC200AI=y
+# end of Sensor support list
+
+#
+# Sensor tuning param config
+#
+
+#
+# src
+#
+CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
+# end of src
+
+CONFIG_SENSOR_TUNING_PARAM="gcore_gc4653"
+# end of Sensor tuning param config
+# end of Sensor settings
+
+#
+# uboot options
+#
+CONFIG_USE_DEFAULT_ENV=y
 CONFIG_UBOOT_2021_10=y
+CONFIG_UBOOT_SRC="u-boot-2021.10"
+# end of uboot options
+
+#
+# Kernel options
+#
 CONFIG_KERNEL_SRC_5.10=y
+CONFIG_KERNEL_SRC="linux_5.10"
 CONFIG_KERNEL_LZMA=y
+CONFIG_KERNEL_COMPRESS="lzma"
+# end of Kernel options
+
+#
+# ROOTFS options
+#
 CONFIG_SKIP_RAMDISK=y
-# CONFIG_ROOTFS_OVERLAYFS is not set
-# CONFIG_TARGET_PACKAGE_CVITRACER is not set
-# CONFIG_TARGET_PACKAGE_GDBSERVER is not set
-# CONFIG_TARGET_PACKAGE_LIBCRYPTO is not set
-# CONFIG_TARGET_PACKAGE_LIBZ is not set
-# CONFIG_TARGET_PACKAGE_OTASERVER is not set
-# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
-CONFIG_TARGET_PACKAGE_CRONTABS=y
-# CONFIG_TARGET_PACKAGE_GATORD is not set
-CONFIG_TARGET_PACKAGE_WIFI=y
+CONFIG_BUILDROOT_FS=y
+# end of ROOTFS options
+
+#
+# Rootfs packages
+#
 CONFIG_TARGET_PACKAGE_DROPBEAR=y
+CONFIG_TARGET_PACKAGE_WIFI=y
+CONFIG_TARGET_PACKAGE_CRONTABS=y
 CONFIG_TARGET_PACKAGE_NTP=y
+# end of Rootfs packages
+
+#
+# RTOS options
+#
 CONFIG_ENABLE_FREERTOS=y
 CONFIG_ENABLE_RTOS_DUMP_PRINT=y
 CONFIG_DUMP_PRINT_SZ_IDX=17
-CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y
-CONFIG_USB_OSDRV_CVITEK_GADGET=n
-CONFIG_BUILDROOT_FS=y
-CONFIG_BUILD_FOR_DEBUG=y
\ No newline at end of file
+CONFIG_FAST_IMAGE_TYPE=0
+CONFIG_DISABLE_ALIOS=y
+# end of RTOS options

build/boards/cv180x/cv1800b_milkv_duo_spinand/cv1800b_milkv_duo_spinand_defconfig

@@ -2,43 +2,115 @@ CONFIG_CHIP_cv1800b=y
 CONFIG_BOARD_milkv_duo_spinand=y
 CONFIG_DDR_CFG_ddr2_1333_x16=y
 CONFIG_ARCH="riscv"
+
+#
+# Compile-time checks and compiler options
+#
 CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
+CONFIG_CROSS_COMPILE_KERNEL="riscv64-unknown-linux-musl-"
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KERNEL_ENTRY_HACK=y
 CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
+# end of Compile-time checks and compiler options
+
+#
+# SDK options
+#
 CONFIG_TOOLCHAIN_MUSL_RISCV64=y
+CONFIG_CROSS_COMPILE_SDK="riscv64-unknown-linux-musl-"
+CONFIG_MW_VER="v2"
+CONFIG_SDK_VER="musl_riscv64"
+CONFIG_BUILD_FOR_DEBUG=y
 CONFIG_FLASH_SIZE_SHRINK=y
-CONFIG_NO_FB=y
-CONFIG_NO_TP=y
-CONFIG_DDR_64MB_SIZE=y
 CONFIG_BOOT_IMAGE_SINGLE_DTB=y
+CONFIG_DDR_64MB_SIZE=y
+# end of SDK options
+
+#
+# FIP setting
+#
+CONFIG_FIP_V2=y
+# end of FIP setting
+
+#
+# Storage settings
+#
 CONFIG_STORAGE_TYPE_spinand=y
-CONFIG_SENSOR_TUNING_PARAM_cv180x_src_sms_sc200ai=y
-CONFIG_SENSOR_SMS_SC200AI=y
+CONFIG_STORAGE_TYPE="spinand"
+CONFIG_NANDFLASH_BLOCKSIZE=131072
+CONFIG_NANDFLASH_PAGESIZE=2048
+# end of Storage settings
+
+#
+# Sensor settings
+#
+
+#
+# Sensor support list
+#
 CONFIG_SENSOR_GCORE_GC2053=y
 CONFIG_SENSOR_GCORE_GC2083=y
-CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_GCORE_GC4653=y
 CONFIG_SENSOR_OV_OV5647=y
+CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_SMS_SC200AI=y
+# end of Sensor support list
+
+#
+# Sensor tuning param config
+#
+
+#
+# src
+#
+CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
+# end of src
+
+CONFIG_SENSOR_TUNING_PARAM="gcore_gc4653"
+# end of Sensor tuning param config
+# end of Sensor settings
+
+#
+# uboot options
+#
+CONFIG_USE_DEFAULT_ENV=y
 CONFIG_UBOOT_2021_10=y
+CONFIG_UBOOT_SRC="u-boot-2021.10"
+# end of uboot options
+
+#
+# Kernel options
+#
 CONFIG_KERNEL_SRC_5.10=y
+CONFIG_KERNEL_SRC="linux_5.10"
 CONFIG_KERNEL_LZMA=y
+CONFIG_KERNEL_COMPRESS="lzma"
+# end of Kernel options
+
+#
+# ROOTFS options
+#
 CONFIG_SKIP_RAMDISK=y
-# CONFIG_ROOTFS_OVERLAYFS is not set
-# CONFIG_TARGET_PACKAGE_CVITRACER is not set
-# CONFIG_TARGET_PACKAGE_GDBSERVER is not set
-# CONFIG_TARGET_PACKAGE_LIBCRYPTO is not set
-# CONFIG_TARGET_PACKAGE_LIBZ is not set
-# CONFIG_TARGET_PACKAGE_OTASERVER is not set
-# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
-CONFIG_TARGET_PACKAGE_CRONTABS=y
-# CONFIG_TARGET_PACKAGE_GATORD is not set
-CONFIG_TARGET_PACKAGE_WIFI=y
-CONFIG_TARGET_PACKAGE_DROPBEAR=y
-CONFIG_TARGET_PACKAGE_NTP=y
+CONFIG_BUILDROOT_FS=y
+CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y
+# end of ROOTFS options
+
+#
+# RTOS options
+#
 CONFIG_ENABLE_FREERTOS=y
 CONFIG_ENABLE_RTOS_DUMP_PRINT=y
 CONFIG_DUMP_PRINT_SZ_IDX=17
-CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y
-CONFIG_USB_OSDRV_CVITEK_GADGET=n
-CONFIG_BUILDROOT_FS=y
-CONFIG_BUILD_FOR_DEBUG=y
+CONFIG_FAST_IMAGE_TYPE=0
+CONFIG_DISABLE_ALIOS=y
+# end of RTOS options
+
+#
+# Rootfs packages
+#
+CONFIG_TARGET_PACKAGE_DROPBEAR=y
+CONFIG_TARGET_PACKAGE_WIFI=y
+CONFIG_TARGET_PACKAGE_CRONTABS=y
+CONFIG_TARGET_PACKAGE_NTP=y
+# end of Rootfs packages
+

build/boards/cv180x/cv1800b_milkv_duo_spinor/cv1800b_milkv_duo_spinor_defconfig

@@ -2,43 +2,115 @@ CONFIG_CHIP_cv1800b=y
 CONFIG_BOARD_milkv_duo_spinor=y
 CONFIG_DDR_CFG_ddr2_1333_x16=y
 CONFIG_ARCH="riscv"
+
+#
+# Compile-time checks and compiler options
+#
 CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
+CONFIG_CROSS_COMPILE_KERNEL="riscv64-unknown-linux-musl-"
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KERNEL_ENTRY_HACK=y
 CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
+# end of Compile-time checks and compiler options
+
+#
+# SDK options
+#
 CONFIG_TOOLCHAIN_MUSL_RISCV64=y
+CONFIG_CROSS_COMPILE_SDK="riscv64-unknown-linux-musl-"
+CONFIG_MW_VER="v2"
+CONFIG_SDK_VER="musl_riscv64"
+CONFIG_BUILD_FOR_DEBUG=y
 CONFIG_FLASH_SIZE_SHRINK=y
-CONFIG_NO_FB=y
-CONFIG_NO_TP=y
-CONFIG_DDR_64MB_SIZE=y
 CONFIG_BOOT_IMAGE_SINGLE_DTB=y
+CONFIG_DDR_64MB_SIZE=y
+# end of SDK options
+
+#
+# FIP setting
+#
+CONFIG_FIP_V2=y
+# end of FIP setting
+
+#
+# Storage settings
+#
 CONFIG_STORAGE_TYPE_spinor=y
-CONFIG_SENSOR_TUNING_PARAM_cv180x_src_sms_sc200ai=y
-CONFIG_SENSOR_SMS_SC200AI=y
+CONFIG_STORAGE_TYPE="spinor"
+CONFIG_NANDFLASH_BLOCKSIZE=131072
+CONFIG_NANDFLASH_PAGESIZE=2048
+# end of Storage settings
+
+#
+# Sensor settings
+#
+
+#
+# Sensor support list
+#
 CONFIG_SENSOR_GCORE_GC2053=y
 CONFIG_SENSOR_GCORE_GC2083=y
-CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_GCORE_GC4653=y
 CONFIG_SENSOR_OV_OV5647=y
+CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_SMS_SC200AI=y
+# end of Sensor support list
+
+#
+# Sensor tuning param config
+#
+
+#
+# src
+#
+CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
+# end of src
+
+CONFIG_SENSOR_TUNING_PARAM="gcore_gc4653"
+# end of Sensor tuning param config
+# end of Sensor settings
+
+#
+# uboot options
+#
+CONFIG_USE_DEFAULT_ENV=y
 CONFIG_UBOOT_2021_10=y
+CONFIG_UBOOT_SRC="u-boot-2021.10"
+# end of uboot options
+
+#
+# Kernel options
+#
 CONFIG_KERNEL_SRC_5.10=y
+CONFIG_KERNEL_SRC="linux_5.10"
 CONFIG_KERNEL_LZMA=y
+CONFIG_KERNEL_COMPRESS="lzma"
+# end of Kernel options
+
+#
+# ROOTFS options
+#
 CONFIG_SKIP_RAMDISK=y
-# CONFIG_ROOTFS_OVERLAYFS is not set
-# CONFIG_TARGET_PACKAGE_CVITRACER is not set
-# CONFIG_TARGET_PACKAGE_GDBSERVER is not set
-# CONFIG_TARGET_PACKAGE_LIBCRYPTO is not set
-# CONFIG_TARGET_PACKAGE_LIBZ is not set
-# CONFIG_TARGET_PACKAGE_OTASERVER is not set
-# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
-CONFIG_TARGET_PACKAGE_CRONTABS=y
-# CONFIG_TARGET_PACKAGE_GATORD is not set
-CONFIG_TARGET_PACKAGE_WIFI=y
-CONFIG_TARGET_PACKAGE_DROPBEAR=y
-CONFIG_TARGET_PACKAGE_NTP=y
+CONFIG_BUILDROOT_FS=y
+CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y
+# end of ROOTFS options
+
+#
+# RTOS options
+#
 CONFIG_ENABLE_FREERTOS=y
 CONFIG_ENABLE_RTOS_DUMP_PRINT=y
 CONFIG_DUMP_PRINT_SZ_IDX=17
-CONFIG_USE_4K_ERASE_SIZE_FOR_JFFS2=y
-CONFIG_USB_OSDRV_CVITEK_GADGET=n
-CONFIG_BUILDROOT_FS=y
-CONFIG_BUILD_FOR_DEBUG=y
+CONFIG_FAST_IMAGE_TYPE=0
+CONFIG_DISABLE_ALIOS=y
+# end of RTOS options
+
+#
+# Rootfs packages
+#
+CONFIG_TARGET_PACKAGE_DROPBEAR=y
+CONFIG_TARGET_PACKAGE_WIFI=y
+CONFIG_TARGET_PACKAGE_CRONTABS=y
+CONFIG_TARGET_PACKAGE_NTP=y
+# end of Rootfs packages
+

build/boards/cv181x/cv1812cp_milkv_duo256m_sd/cv1812cp_milkv_duo256m_sd_defconfig

@@ -2,31 +2,118 @@ CONFIG_CHIP_cv1812cp=y
 CONFIG_BOARD_milkv_duo256m_sd=y
 CONFIG_DDR_CFG_ddr3_1866_x16=y
 CONFIG_ARCH="riscv"
+
+#
+# Compile-time checks and compiler options
+#
 CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
+CONFIG_CROSS_COMPILE_KERNEL="riscv64-unknown-linux-musl-"
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KERNEL_ENTRY_HACK=y
 CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
+# end of Compile-time checks and compiler options
+
+#
+# SDK options
+#
 CONFIG_TOOLCHAIN_MUSL_RISCV64=y
+CONFIG_CROSS_COMPILE_SDK="riscv64-unknown-linux-musl-"
+CONFIG_MW_VER="v2"
+CONFIG_SDK_VER="musl_riscv64"
+CONFIG_BUILD_FOR_DEBUG=y
 CONFIG_FLASH_SIZE_SHRINK=y
 CONFIG_BOOT_IMAGE_SINGLE_DTB=y
+# end of SDK options
+
+#
+# FIP setting
+#
+CONFIG_FIP_V2=y
 CONFIG_OD_CLK_SEL=y
+# end of FIP setting
+
+#
+# Storage settings
+#
 CONFIG_STORAGE_TYPE_sd=y
-CONFIG_SENSOR_SONY_IMX327=y
+CONFIG_STORAGE_TYPE="sd"
+CONFIG_NANDFLASH_BLOCKSIZE=131072
+CONFIG_NANDFLASH_PAGESIZE=2048
+# end of Storage settings
+
+#
+# Sensor settings
+#
+
+#
+# Sensor support list
+#
+CONFIG_SENSOR_GCORE_GC2053=y
 CONFIG_SENSOR_GCORE_GC2083=y
+CONFIG_SENSOR_GCORE_GC4653=y
+CONFIG_SENSOR_OV_OV5647=y
 CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_SMS_SC200AI=y
+# end of Sensor support list
+
+#
+# Sensor tuning param config
+#
+
+#
+# src
+#
+CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
+# end of src
+
+CONFIG_SENSOR_TUNING_PARAM="gcore_gc4653"
+# end of Sensor tuning param config
+# end of Sensor settings
+
+#
+# uboot options
+#
+CONFIG_USE_DEFAULT_ENV=y
 CONFIG_UBOOT_2021_10=y
+CONFIG_UBOOT_SRC="u-boot-2021.10"
+# end of uboot options
+
+#
+# Kernel options
+#
 CONFIG_KERNEL_SRC_5.10=y
+CONFIG_KERNEL_SRC="linux_5.10"
 CONFIG_KERNEL_LZMA=y
+CONFIG_KERNEL_COMPRESS="lzma"
+# end of Kernel options
+
+#
+# ROOTFS options
+#
 CONFIG_SKIP_RAMDISK=y
-# CONFIG_ROOTFS_OVERLAYFS is not set
+CONFIG_BUILDROOT_FS=y
+# end of ROOTFS options
+
+#
+# Rootfs packages
+#
 CONFIG_TARGET_PACKAGE_DROPBEAR=y
+CONFIG_TARGET_PACKAGE_GDBSERVER=y
+CONFIG_TARGET_PACKAGE_LIBCRYPTO=y
+CONFIG_TARGET_PACKAGE_LIBZ=y
 CONFIG_TARGET_PACKAGE_MTD-UTILS=y
-# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
+CONFIG_TARGET_PACKAGE_OTASERVER=y
 CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
+CONFIG_TARGET_PACKAGE_CRONTABS=y
+CONFIG_TARGET_PACKAGE_NTP=y
+# end of Rootfs packages
+
+#
+# RTOS options
+#
 CONFIG_ENABLE_FREERTOS=y
 CONFIG_ENABLE_RTOS_DUMP_PRINT=y
 CONFIG_DUMP_PRINT_SZ_IDX=17
-CONFIG_TARGET_PACKAGE_GATORD=n
-CONFIG_TARGET_PACKAGE_NTP=y
-# CONFIG_TARGET_PACKAGE_WIFI is not set
-CONFIG_BUILDROOT_FS=y
+CONFIG_FAST_IMAGE_TYPE=0
+CONFIG_DISABLE_ALIOS=y
+# end of RTOS options

build/boards/cv181x/cv1813h_milkv_duos_emmc/cv1813h_milkv_duos_emmc_defconfig

@@ -2,46 +2,122 @@ CONFIG_CHIP_cv1813h=y
 CONFIG_BOARD_milkv_duos_emmc=y
 CONFIG_DDR_CFG_ddr3_1866_x16=y
 CONFIG_ARCH="riscv"
-CONFIG_CROSS_COMPILE="riscv64-unknown-linux-gnu-"
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
+CONFIG_CROSS_COMPILE_KERNEL="riscv64-unknown-linux-musl-"
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KERNEL_ENTRY_HACK=y
 CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
+# end of Compile-time checks and compiler options
+
+#
+# SDK options
+#
 CONFIG_TOOLCHAIN_MUSL_RISCV64=y
+CONFIG_CROSS_COMPILE_SDK="riscv64-unknown-linux-musl-"
+CONFIG_MW_VER="v2"
+CONFIG_SDK_VER="musl_riscv64"
+CONFIG_BUILD_FOR_DEBUG=y
 CONFIG_FLASH_SIZE_SHRINK=y
 CONFIG_BOOT_IMAGE_SINGLE_DTB=y
+# end of SDK options
+
+#
+# FIP setting
+#
+CONFIG_FIP_V2=y
 CONFIG_OD_CLK_SEL=y
+# end of FIP setting
+
+#
+# Storage settings
+#
 CONFIG_STORAGE_TYPE_emmc=y
-CONFIG_SENSOR_GCORE_GC4653=y
+CONFIG_STORAGE_TYPE="emmc"
+CONFIG_NANDFLASH_BLOCKSIZE=131072
+CONFIG_NANDFLASH_PAGESIZE=2048
+# end of Storage settings
+
+#
+# Sensor settings
+#
+
+#
+# Sensor support list
+#
+CONFIG_SENSOR_GCORE_GC2053=y
 CONFIG_SENSOR_GCORE_GC2083=y
-CONFIG_SENSOR_SMS_SC3335=y
-CONFIG_SENSOR_SMS_SC500AI=y
-CONFIG_SENSOR_SONY_IMX307=y
-CONFIG_SENSOR_SONY_IMX307_2L=y
-CONFIG_SENSOR_SONY_IMX307_SLAVE=y
-CONFIG_SENSOR_SONY_IMX327=y
-CONFIG_SENSOR_SONY_IMX327_2L=y
-CONFIG_SENSOR_SONY_IMX327_SLAVE=y
+CONFIG_SENSOR_GCORE_GC4653=y
 CONFIG_SENSOR_OV_OV5647=y
-CONFIG_SENSOR_OV_OS04C10=y
-CONFIG_SENSOR_OV_OS04A10=y
+CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_SMS_SC200AI=y
+# end of Sensor support list
+
+#
+# Sensor tuning param config
+#
+
+#
+# src
+#
+CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
+# end of src
+
+CONFIG_SENSOR_TUNING_PARAM="gcore_gc4653"
+# end of Sensor tuning param config
+# end of Sensor settings
+
+#
+# uboot options
+#
+CONFIG_USE_DEFAULT_ENV=y
 CONFIG_UBOOT_2021_10=y
+CONFIG_UBOOT_SRC="u-boot-2021.10"
+# end of uboot options
+
+#
+# Kernel options
+#
 CONFIG_KERNEL_SRC_5.10=y
+CONFIG_KERNEL_SRC="linux_5.10"
 CONFIG_KERNEL_LZMA=y
+CONFIG_KERNEL_COMPRESS="lzma"
+# end of Kernel options
+
+#
+# ROOTFS options
+#
 CONFIG_SKIP_RAMDISK=y
-CONFIG_TARGET_PACKAGE_PARTED=y
-CONFIG_TARGET_PACKAGE_E2FSPROGS=y
-CONFIG_TARGET_PACKAGE_ENVTOOLS=y
-# CONFIG_TARGET_PACKAGE_GATORD is not set
-CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
-# CONFIG_ROOTFS_OVERLAYFS is not set
-CONFIG_TARGET_PACKAGE_DROPBEAR=y
-CONFIG_TARGET_PACKAGE_MTD-UTILS=y
-# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
-CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
+CONFIG_BUILDROOT_FS=y
+# end of ROOTFS options
+
+#
+# RTOS options
+#
 CONFIG_ENABLE_FREERTOS=y
 CONFIG_ENABLE_RTOS_DUMP_PRINT=y
 CONFIG_DUMP_PRINT_SZ_IDX=17
-CONFIG_TARGET_PACKAGE_GATORD=n
+CONFIG_FAST_IMAGE_TYPE=0
+CONFIG_DISABLE_ALIOS=y
+# end of RTOS options
+
+#
+# Rootfs packages
+#
+CONFIG_TARGET_PACKAGE_DROPBEAR=y
+CONFIG_TARGET_PACKAGE_GDBSERVER=y
+CONFIG_TARGET_PACKAGE_LIBCRYPTO=y
+CONFIG_TARGET_PACKAGE_LIBZ=y
+CONFIG_TARGET_PACKAGE_MTD-UTILS=y
+CONFIG_TARGET_PACKAGE_OTASERVER=y
+CONFIG_TARGET_PACKAGE_PARTED=y
+CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
+CONFIG_TARGET_PACKAGE_CRONTABS=y
+CONFIG_TARGET_PACKAGE_E2FSPROGS=y
 CONFIG_TARGET_PACKAGE_NTP=y
-# CONFIG_TARGET_PACKAGE_WIFI is not set
-CONFIG_BUILDROOT_FS=y
+CONFIG_TARGET_PACKAGE_ENVTOOLS=y
+# end of Rootfs packages
+

build/boards/cv181x/cv1813h_milkv_duos_sd/cv1813h_milkv_duos_sd_defconfig

@@ -2,46 +2,121 @@ CONFIG_CHIP_cv1813h=y
 CONFIG_BOARD_milkv_duos_sd=y
 CONFIG_DDR_CFG_ddr3_1866_x16=y
 CONFIG_ARCH="riscv"
-CONFIG_CROSS_COMPILE="riscv64-unknown-linux-gnu-"
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
+CONFIG_CROSS_COMPILE_KERNEL="riscv64-unknown-linux-musl-"
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KERNEL_ENTRY_HACK=y
 CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
+# end of Compile-time checks and compiler options
+
+#
+# SDK options
+#
 CONFIG_TOOLCHAIN_MUSL_RISCV64=y
+CONFIG_CROSS_COMPILE_SDK="riscv64-unknown-linux-musl-"
+CONFIG_MW_VER="v2"
+CONFIG_SDK_VER="musl_riscv64"
+CONFIG_BUILD_FOR_DEBUG=y
 CONFIG_FLASH_SIZE_SHRINK=y
 CONFIG_BOOT_IMAGE_SINGLE_DTB=y
+# end of SDK options
+
+#
+# FIP setting
+#
+CONFIG_FIP_V2=y
 CONFIG_OD_CLK_SEL=y
+# end of FIP setting
+
+#
+# Storage settings
+#
 CONFIG_STORAGE_TYPE_sd=y
-CONFIG_SENSOR_GCORE_GC4653=y
+CONFIG_STORAGE_TYPE="sd"
+CONFIG_NANDFLASH_BLOCKSIZE=131072
+CONFIG_NANDFLASH_PAGESIZE=2048
+# end of Storage settings
+
+#
+# Sensor settings
+#
+
+#
+# Sensor support list
+#
+CONFIG_SENSOR_GCORE_GC2053=y
 CONFIG_SENSOR_GCORE_GC2083=y
-CONFIG_SENSOR_SMS_SC3335=y
-CONFIG_SENSOR_SMS_SC500AI=y
-CONFIG_SENSOR_SONY_IMX307=y
-CONFIG_SENSOR_SONY_IMX307_2L=y
-CONFIG_SENSOR_SONY_IMX307_SLAVE=y
-CONFIG_SENSOR_SONY_IMX327=y
-CONFIG_SENSOR_SONY_IMX327_2L=y
-CONFIG_SENSOR_SONY_IMX327_SLAVE=y
+CONFIG_SENSOR_GCORE_GC4653=y
 CONFIG_SENSOR_OV_OV5647=y
-CONFIG_SENSOR_OV_OS04C10=y
-CONFIG_SENSOR_OV_OS04A10=y
+CONFIG_SENSOR_SMS_SC035HGS=y
+CONFIG_SENSOR_SMS_SC200AI=y
+# end of Sensor support list
+
+#
+# Sensor tuning param config
+#
+
+#
+# src
+#
+CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
+# end of src
+
+CONFIG_SENSOR_TUNING_PARAM="gcore_gc4653"
+# end of Sensor tuning param config
+# end of Sensor settings
+
+#
+# uboot options
+#
+CONFIG_USE_DEFAULT_ENV=y
 CONFIG_UBOOT_2021_10=y
+CONFIG_UBOOT_SRC="u-boot-2021.10"
+# end of uboot options
+
+#
+# Kernel options
+#
 CONFIG_KERNEL_SRC_5.10=y
+CONFIG_KERNEL_SRC="linux_5.10"
 CONFIG_KERNEL_LZMA=y
+CONFIG_KERNEL_COMPRESS="lzma"
+# end of Kernel options
+
+#
+# ROOTFS options
+#
 CONFIG_SKIP_RAMDISK=y
-CONFIG_TARGET_PACKAGE_PARTED=y
-CONFIG_TARGET_PACKAGE_E2FSPROGS=y
-CONFIG_TARGET_PACKAGE_ENVTOOLS=y
-# CONFIG_TARGET_PACKAGE_GATORD is not set
-CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
-# CONFIG_ROOTFS_OVERLAYFS is not set
-CONFIG_TARGET_PACKAGE_DROPBEAR=y
-CONFIG_TARGET_PACKAGE_MTD-UTILS=y
-# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
-CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
+CONFIG_BUILDROOT_FS=y
+# end of ROOTFS options
+
+#
+# RTOS options
+#
 CONFIG_ENABLE_FREERTOS=y
 CONFIG_ENABLE_RTOS_DUMP_PRINT=y
 CONFIG_DUMP_PRINT_SZ_IDX=17
-CONFIG_TARGET_PACKAGE_GATORD=n
+CONFIG_FAST_IMAGE_TYPE=0
+CONFIG_DISABLE_ALIOS=y
+# end of RTOS options
+
+#
+# Rootfs packages
+#
+CONFIG_TARGET_PACKAGE_DROPBEAR=y
+CONFIG_TARGET_PACKAGE_GDBSERVER=y
+CONFIG_TARGET_PACKAGE_LIBCRYPTO=y
+CONFIG_TARGET_PACKAGE_LIBZ=y
+CONFIG_TARGET_PACKAGE_MTD-UTILS=y
+CONFIG_TARGET_PACKAGE_OTASERVER=y
+CONFIG_TARGET_PACKAGE_PARTED=y
+CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
+CONFIG_TARGET_PACKAGE_CRONTABS=y
+CONFIG_TARGET_PACKAGE_E2FSPROGS=y
 CONFIG_TARGET_PACKAGE_NTP=y
-# CONFIG_TARGET_PACKAGE_WIFI is not set
-CONFIG_BUILDROOT_FS=y
+CONFIG_TARGET_PACKAGE_ENVTOOLS=y
+# end of Rootfs packages