Skip to content

GitLab

C
circuitpython
Commit 51f3a6be authored by Damien George's avatar Damien George
Browse files
Options

stm: Improved ADC module; add BOARD_NAME config value.

parent b829b5ca
Hide whitespace changes
Inline Side-by-side
Showing with 209 additions and 58 deletions
stm/adc.c
View file @ 51f3a6be
......@@ -2,6 +2,7 @@
#include <stm32f4xx.h>
#include "misc.h"
#include "nlr.h"
#include "mpconfig.h"
#include "qstr.h"
#include "obj.h"
......@@ -41,7 +42,7 @@ typedef struct {
} gpio_t;
/* ADC GPIOs */
static gpio_t adc_gpio[] = {
static const gpio_t adc_gpio[] = {
{GPIOA, GPIO_Pin_0}, /* ADC123_IN0 */
{GPIOA, GPIO_Pin_1}, /* ADC123_IN1 */
{GPIOA, GPIO_Pin_2}, /* ADC123_IN2 */
......@@ -61,7 +62,7 @@ static gpio_t adc_gpio[] = {
};
void adc_init(uint32_t resolution) {
void adc_init_all(uint32_t resolution) {
ADC_InitTypeDef ADC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
ADC_CommonInitTypeDef ADC_CommonInitStructure;
......@@ -111,6 +112,54 @@ void adc_init(uint32_t resolution) {
ADC_TempSensorVrefintCmd(ENABLE);
}
void adc_init_single(uint32_t channel) {
ADC_InitTypeDef ADC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
ADC_CommonInitTypeDef ADC_CommonInitStructure;
/* Enable ADCx, DMA and GPIO clocks */
#if 0
/* GPIO clocks enabled in main */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA |
RCC_AHB1Periph_GPIOB |
RCC_AHB1Periph_GPIOC, ENABLE);
#endif
RCC_APB2PeriphClockCmd(ADCx_CLK, ENABLE);
/* ADC Common Init */
ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_CommonInitStructure.ADC_Prescaler = ADC_Prescaler_Div2;
ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
ADC_CommonInit(&ADC_CommonInitStructure);
/* Configure ADC GPIO for the single channel */
GPIO_InitStructure.GPIO_Pin = adc_gpio[channel].pin;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(adc_gpio[channel].port, &GPIO_InitStructure);
/* ADCx Init */
// ADC_DeInit();
ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfConversion = 1;
ADC_Init(ADCx, &ADC_InitStructure);
/* Enable ADCx */
ADC_Cmd(ADCx, ENABLE);
/* Enable VBAT/VREF monitor */
ADC_VBATCmd(ENABLE);
/* Enable temperature sensor */
ADC_TempSensorVrefintCmd(ENABLE);
}
uint32_t adc_read_channel(int channel)
{
int timeout = 10000;
......@@ -213,91 +262,183 @@ float adc_read_core_vref()
}
/******************************************************************************/
/* Micro Python bindings */
/* Micro Python bindings : adc_all object */
typedef struct _pyb_adc_obj_t {
typedef struct _pyb_obj_adc_all_t {
mp_obj_base_t base;
int adc_id;
bool is_enabled;
} pyb_adc_obj_t;
} pyb_obj_adc_all_t;
static void adc_all_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
print(env, "<ADC all>");
}
static mp_obj_t adc_obj_read_channel(mp_obj_t self_in, mp_obj_t channel) {
mp_obj_t ret = mp_const_none;
pyb_adc_obj_t *self = self_in;
static mp_obj_t adc_all_read_channel(mp_obj_t self_in, mp_obj_t channel) {
pyb_obj_adc_all_t *self = self_in;
if (self->is_enabled) {
uint32_t chan = mp_obj_get_int(channel);
uint32_t data = adc_read_channel(chan);
ret = mp_obj_new_int(data);
return mp_obj_new_int(data);
} else {
return mp_const_none;
}
return ret;
}
static mp_obj_t adc_obj_read_core_temp(mp_obj_t self_in) {
mp_obj_t ret = mp_const_none;
pyb_adc_obj_t *self = self_in;
static mp_obj_t adc_all_read_core_temp(mp_obj_t self_in) {
pyb_obj_adc_all_t *self = self_in;
if (self->is_enabled) {
int data = adc_read_core_temp();
ret = mp_obj_new_int(data);
return mp_obj_new_int(data);
} else {
return mp_const_none;
}
return ret;
}
static mp_obj_t adc_obj_read_core_vbat(mp_obj_t self_in) {
mp_obj_t ret = mp_const_none;
pyb_adc_obj_t *self = self_in;
static mp_obj_t adc_all_read_core_vbat(mp_obj_t self_in) {
pyb_obj_adc_all_t *self = self_in;
if (self->is_enabled) {
float data = adc_read_core_vbat();
ret = mp_obj_new_float(data);
return mp_obj_new_float(data);
} else {
return mp_const_none;
}
return ret;
}
static mp_obj_t adc_obj_read_core_vref(mp_obj_t self_in) {
mp_obj_t ret = mp_const_none;
pyb_adc_obj_t *self = self_in;
static mp_obj_t adc_all_read_core_vref(mp_obj_t self_in) {
pyb_obj_adc_all_t *self = self_in;
if (self->is_enabled) {
float data = adc_read_core_vref();
ret = mp_obj_new_float(data);
return mp_obj_new_float(data);
} else {
return mp_const_none;
}
return ret;
}
static void adc_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
pyb_adc_obj_t *self = self_in;
print(env, "<ADC %lu>", self->adc_id);
static MP_DEFINE_CONST_FUN_OBJ_2(adc_all_read_channel_obj, adc_all_read_channel);
static MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_temp_obj, adc_all_read_core_temp);
static MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_vbat_obj, adc_all_read_core_vbat);
static MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_vref_obj, adc_all_read_core_vref);
static const mp_method_t adc_all_methods[] = {
{ "read_channel", &adc_all_read_channel_obj},
{ "read_core_temp", &adc_all_read_core_temp_obj},
{ "read_core_vbat", &adc_all_read_core_vbat_obj},
{ "read_core_vref", &adc_all_read_core_vref_obj},
{ NULL, NULL },
};
static const mp_obj_type_t adc_all_type = {
{ &mp_const_type },
"ADC_all",
.print = adc_all_print,
.methods = adc_all_methods,
};
mp_obj_t pyb_ADC_all(mp_obj_t resolution) {
/* init ADC */
adc_init_all(mp_obj_get_int(resolution));
pyb_obj_adc_all_t *o = m_new_obj(pyb_obj_adc_all_t);
o->base.type = &adc_all_type;
o->is_enabled = true;
return o;
}
static MP_DEFINE_CONST_FUN_OBJ_2(adc_obj_read_channel_obj, adc_obj_read_channel);
static MP_DEFINE_CONST_FUN_OBJ_1(adc_obj_read_core_temp_obj, adc_obj_read_core_temp);
static MP_DEFINE_CONST_FUN_OBJ_1(adc_obj_read_core_vbat_obj, adc_obj_read_core_vbat);
static MP_DEFINE_CONST_FUN_OBJ_1(adc_obj_read_core_vref_obj, adc_obj_read_core_vref);
MP_DEFINE_CONST_FUN_OBJ_1(pyb_ADC_all_obj, pyb_ADC_all);
/******************************************************************************/
/* Micro Python bindings : adc object (single channel) */
typedef struct _pyb_obj_adc_t {
mp_obj_base_t base;
mp_obj_t pin_name;
int channel;
bool is_enabled;
} pyb_obj_adc_t;
static void adc_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
pyb_obj_adc_t *self = self_in;
print(env, "<ADC on ");
mp_obj_print_helper(print, env, self->pin_name, PRINT_STR);
print(env, " channel=%lu>", self->channel);
}
static mp_obj_t adc_read(mp_obj_t self_in) {
pyb_obj_adc_t *self = self_in;
if (self->is_enabled) {
uint32_t data = adc_read_channel(self->channel);
return mp_obj_new_int(data);
} else {
return mp_const_none;
}
}
static MP_DEFINE_CONST_FUN_OBJ_1(adc_read_obj, adc_read);
static const mp_method_t adc_methods[] = {
{ "read_channel", &adc_obj_read_channel_obj},
{ "read_core_temp", &adc_obj_read_core_temp_obj},
{ "read_core_vbat", &adc_obj_read_core_vbat_obj},
{ "read_core_vref", &adc_obj_read_core_vref_obj},
{ "read", &adc_read_obj},
{ NULL, NULL },
};
static const mp_obj_type_t adc_obj_type = {
static const mp_obj_type_t adc_type = {
{ &mp_const_type },
"ADC",
.print = adc_obj_print,
.print = adc_print,
.methods = adc_methods,
};
mp_obj_t pyb_ADC(mp_obj_t resolution) {
/* init ADC */
adc_init(mp_obj_get_int(resolution));
mp_obj_t pyb_ADC(mp_obj_t pin_name_obj) {
pyb_obj_adc_t *o = m_new_obj(pyb_obj_adc_t);
o->base.type = &adc_type;
o->pin_name = pin_name_obj;
// work out the channel from the pin name
const char *pin_name = mp_obj_str_get_str(pin_name_obj);
GPIO_TypeDef *port;
switch (pin_name[0]) {
case 'A': case 'a': port = GPIOA; break;
case 'B': case 'b': port = GPIOB; break;
case 'C': case 'c': port = GPIOC; break;
default: goto pin_error;
}
uint pin_num = 0;
for (const char *s = pin_name + 1; *s; s++) {
if (!('0' <= *s && *s <= '9')) {
goto pin_error;
}
pin_num = 10 * pin_num + *s - '0';
}
if (!(0 <= pin_num && pin_num <= 15)) {
goto pin_error;
}
int i;
for (i = 0; i < ADC_NUM_CHANNELS; i++) {
if (adc_gpio[i].port == port && adc_gpio[i].pin == (1 << pin_num)) {
o->channel = i;
break;
}
}
if (i == ADC_NUM_CHANNELS) {
nlr_jump(mp_obj_new_exception_msg_1_arg(MP_QSTR_ValueError, "pin %s does not have ADC capabilities", pin_name));
}
// init ADC just for this channel
adc_init_single(o->channel);
pyb_adc_obj_t *o = m_new_obj(pyb_adc_obj_t);
o->base.type = &adc_obj_type;
o->adc_id = 1;
o->is_enabled = true;
return o;
pin_error:
nlr_jump(mp_obj_new_exception_msg_1_arg(MP_QSTR_ValueError, "pin %s does not exist", pin_name));
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_ADC_obj, pyb_ADC);
stm/adc.h
View file @ 51f3a6be
mp_obj_t pyb_ADC(mp_obj_t resolution);
MP_DECLARE_CONST_FUN_OBJ(pyb_ADC_all_obj);
MP_DECLARE_CONST_FUN_OBJ(pyb_ADC_obj);
stm/lcd.c
View file @ 51f3a6be
......@@ -13,7 +13,7 @@
#include "font_petme128_8x8.h"
#include "lcd.h"
#if defined(PYBOARD)
#if defined(PYBOARD3)
#define PYB_LCD_PORT (GPIOA)
#define PYB_LCD_CS1_PIN (GPIO_Pin_0)
#define PYB_LCD_RST_PIN (GPIO_Pin_1)
......
stm/lib/stm324x7i_eval.c
View file @ 51f3a6be
......@@ -122,7 +122,7 @@ void SD_LowLevel_Init(void)
GPIO_Init(GPIOC, &GPIO_InitStructure);
/*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */
#if defined(PYBOARD)
#if defined(PYBOARD3)
// dpgeorge: PYBv2-v3: switch is normally open, connected to VDD when card inserted
GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; // needs to be 2MHz due to restrictions on PC13
......
stm/lib/stm324x7i_eval.h
View file @ 51f3a6be
......@@ -41,7 +41,7 @@
/**
* @brief SD FLASH SDIO Interface
*/
#if defined(PYBOARD)
#if defined(PYBOARD3)
#define SD_DETECT_PIN GPIO_Pin_13 /* PC.13 */
#define SD_DETECT_GPIO_PORT GPIOC /* GPIOC */
#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOC
......
stm/lib/stm324x7i_eval_sdio_sd.c
View file @ 51f3a6be
......@@ -518,7 +518,7 @@ uint8_t SD_Detect(void)
__IO uint8_t status = SD_PRESENT;
/*!< Check GPIO to detect SD */
#if defined(PYBOARD)
#if defined(PYBOARD3)
if (GPIO_ReadInputDataBit(SD_DETECT_GPIO_PORT, SD_DETECT_PIN) != Bit_SET)
#elif defined(PYBOARD4)
if (GPIO_ReadInputDataBit(SD_DETECT_GPIO_PORT, SD_DETECT_PIN) == Bit_SET)
......
stm/main.c
View file @ 51f3a6be
......@@ -137,8 +137,10 @@ static const char *help_text =
" pyb.switch() -- return True/False if switch pressed or not\n"
" pyb.accel() -- get accelerometer values\n"
" pyb.rand() -- get a 16-bit random number\n"
" pyb.gpio(<port>) -- get port value (port='a4' for example)\n"
" pyb.gpio(<port>) -- get port value (port='A4' for example)\n"
" pyb.gpio(<port>, <val>) -- set port value, True or False, 1 or 0\n"
" pyb.ADC(<port>) -- make an analog port object (port='C0' for example)\n"
" ADC methods: read()\n"
;
// get some help about available functions
......@@ -348,7 +350,7 @@ int readline(vstr_t *line, const char *prompt) {
}
void do_repl(void) {
stdout_tx_str("Micro Python build <git hash> on 2/1/2014; PYBv3 with STM32F405RG\r\n");
stdout_tx_str("Micro Python build <git hash> on 25/1/2014; " MICROPY_HW_BOARD_NAME " with STM32F405RG\r\n");
stdout_tx_str("Type \"help()\" for more information.\r\n");
vstr_t line;
......@@ -654,7 +656,8 @@ soft_reset:
rt_store_attr(m, MP_QSTR_I2C, rt_make_function_n(2, pyb_I2C));
rt_store_attr(m, MP_QSTR_gpio, (mp_obj_t)&pyb_gpio_obj);
rt_store_attr(m, MP_QSTR_Usart, rt_make_function_n(2, pyb_Usart));
rt_store_attr(m, MP_QSTR_ADC, rt_make_function_n(1, pyb_ADC));
rt_store_attr(m, qstr_from_str("ADC_all"), (mp_obj_t)&pyb_ADC_all_obj);
rt_store_attr(m, MP_QSTR_ADC, (mp_obj_t)&pyb_ADC_obj);
rt_store_name(MP_QSTR_pyb, m);
rt_store_name(MP_QSTR_open, rt_make_function_n(2, pyb_io_open));
......
stm/mpconfigport.h
View file @ 51f3a6be
......@@ -23,11 +23,13 @@ machine_float_t machine_sqrt(machine_float_t x);
// board specific definitions
// choose 1 of these boards
//#define PYBOARD
#define PYBOARD4
#define PYBOARD3
//#define PYBOARD4
//#define STM32F4DISC
#if defined (PYBOARD)
#if defined (PYBOARD3)
#define MICROPY_HW_BOARD_NAME "PYBv3"
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (1)
#define MICROPY_HW_HAS_MMA7660 (1)
......@@ -68,6 +70,8 @@ machine_float_t machine_sqrt(machine_float_t x);
#define PYB_LED_OFF(port, pin) (port->BSRRL = pin)
#elif defined (PYBOARD4)
#define MICROPY_HW_BOARD_NAME "PYBv4"
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (1)
#define MICROPY_HW_HAS_MMA7660 (1)
......@@ -108,6 +112,8 @@ machine_float_t machine_sqrt(machine_float_t x);
#define PYB_LED_OFF(port, pin) (port->BSRRH = pin)
#elif defined (STM32F4DISC)
#define MICROPY_HW_BOARD_NAME "F4DISC"
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (0)
#define MICROPY_HW_HAS_MMA7660 (0)
......
stm/usart.c
View file @ 51f3a6be
......@@ -77,7 +77,7 @@ void usart_init(pyb_usart_t usart_id, uint32_t baudrate) {
case PYB_USART_3:
USARTx = USART3;
#if defined(PYBOARD4)
#if defined(PYBOARD3) || defined(PYBOARD4)
GPIO_Port = GPIOB;
GPIO_AF_USARTx = GPIO_AF_USART3;
GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11;
......
stm/usrsw.c
View file @ 51f3a6be
......@@ -44,7 +44,7 @@ void switch_init(void) {
}
int switch_get(void) {
#if defined (PYBOARD) || defined (PYBOARD4)
#if defined (PYBOARD3) || defined (PYBOARD4)
if (USRSW_PORT->IDR & USRSW_PIN) {
// pulled high, so switch is not pressed
return 0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment