GitLab

Add definitions for compatibility to many platforms and libraries
- clockCyclesPerMicrosecond()
- clockCyclesToMicroseconds(a)
- microsecondsToClockCycles(a)

Add -DBOARD_NAME="{build.board}" to Compile patterns to facilitate using BOARD_NAME in sketches

Was required before due to C++ internals, but is not needed anymore thanks
to #137

Older builds included C++ locale information in RAM/flash as well as a
bunch of exception code which can't get called since they're not enabled.

Remove them by adjusting final link command and not instantiating them
in main.cpp in the first place.

Blink went from:
> Sketch uses 215604 bytes (10%) of program storage space. Maximum is 2093056 bytes.
> Global variables use 18152 bytes (6%) of dynamic memory, leaving 243992 bytes for local variables. Maximum is 262144 bytes.

To:
> Sketch uses 56112 bytes (5%) of program storage space. Maximum is 1044480 bytes.
> Global variables use 12152 bytes (4%) of dynamic memory, leaving 249992 bytes for local variables. Maximum is 262144 bytes.

For a savings of **155KB of flash** and **6KB of RAM**

Should fix #134 .  The SPI pin macros were set using the SPI1 set, not
the SPI0 set of pins it should have been using.

Use a shared infrastructure based on TinyUSB, allow users to use sketches
with ported Arduino Keyboard and Mouse libraries.

Most users w/the Library Manager will get a little nervous with the GH site.
The ReadTheDocs site includes links to the GH site, too, so they can still
find the origin.

Per #130 request, the dtostrf() definition and others were not visible.

Added Printable.h in dir where it can be found

Also add a README.md to the tools directory.

Add -fno-exceptions and -fno-rtti where possible.
Move insanely long strings to @files to shrink platform.txt and make
build command line shorter.

Was never deleting the tone object on noTone, so eventually the leaked
objects would fill up heap and cause a crash.

Fixes #121

BOOTSEL needs to be multicore protected, too.
Reading BOOTSEL required disabling the flash interface, so the other
core needs to be idles while this runs.

Make the PIO program object multicore safe, too, so that if both cores
try to load a program they won't step on each other.

Fix some typos

Fixes #28

Update pico-sdk to 1.1.2

Add methods to block the opposite core while doing flash updates.
Ensure opposite core is stopped in LittleFS and EEPROM while doing
flash updates.

Update documentation with new calls.

Fixes #120

* add keywords file

* Add PWM function definitions

Support running code on the second core by adding a setup1() and/or
a loop1() routine to a sketch.  These functions operate exactly like
the normal Arduino ones, and anything they call will be run on
the second core automatically.

Add a simple multicore example.

Using the official Raspberry Pi Pico datasheet and the Adafruit Feather
RP2040 schematic, set the default pins for peripherals to match.

Fixes #92

Keep a per-core IRQ stack for noInterrupts since each core has its own
enable/disable.

Make analogRead/analogWrite multicore safe

Add a mutex around the Tone mapping for multicore safety.