GitLab

Hi,

Just a typo and a couple of wording corrections.

Fixes #2047

Fixes #2034

Fixes #2019

Fixes #2008

MACs are 6-bytes long, not 8.

See https://github.com/earlephilhower/arduino-pico/pull/2001#issuecomment-1944461469

Remove the HW random generator call while initting LWIP to avoid the SDK
looping forver due to FreeRTOS exception/timer interrupts.

The `Picoprobe` example showing how to upload to Ubuntu is invalid because Ubuntu does not create or assign users to a `users` group (for many major releases, now). 

The reason the example worked is because the permissions were applied globally, rendering the `GROUP=users` assignment in the rule irrelevant. Hence, this assignment has been dropped.  

The `pico-debug` example has been updated similarly, but it uses a proper group-level rule, and Ubuntu does still use group `plugdev`. 

The reader thus has two good examples of creating `udev` rules.

WiFiMulti specifies a specific BSSID, in addition to the AP name and
password.  In the WiFi core the BSSID is stored as the raw 6-byte MAC
address, but the ESPHostedFG firmware expects a formatted C-String
(i.e. "ab:cd:ef:01:02:03" instead of {0xab, 0xcd, 0xef, 1, 2, 3})

Convert the raw bytes to the string format expected in the ESP FW.

Use the #define board name to identify when building for the
WIZnet W5100s-EVB-Pico and assign the proper pins and IRQs.

Fixes #1991

Correct buffer size to match Wire.h

Remove outdated(?) info

No polling needed and massively reduces latency by using the GPIO interrupt to
signal the Pico to read a received packet.  Also drops CPU load when no packets
are incoming.

Fixes #1983

Fixes #1973

The periodic LWIP pump/Ethernet packet reader async_context stopped
firing occasionally under high packet loads, causing the LWIP stack
to become unresponsive to any incoming data.

Re-implement the 2-step process for polling (like the CYW43 driver
from the RPI folks does) and undoes #1864 change.

All binaries should now be native on Apple silicon.

* Add native Apple ARM silicon M1/M2/M3 support

* Identify Mac ARM in download get.py script

Thanks to the ESP32 `get.py` sources!

* Rebuild M1 w/o using strip