GitLab

Most users w/the Library Manager will get a little nervous with the GH site.
The ReadTheDocs site includes links to the GH site, too, so they can still
find the origin.

Per #130 request, the dtostrf() definition and others were not visible.

Added Printable.h in dir where it can be found

Also add a README.md to the tools directory.

Add -fno-exceptions and -fno-rtti where possible.
Move insanely long strings to @files to shrink platform.txt and make
build command line shorter.

Was never deleting the tone object on noTone, so eventually the leaked
objects would fill up heap and cause a crash.

Fixes #121

BOOTSEL needs to be multicore protected, too.
Reading BOOTSEL required disabling the flash interface, so the other
core needs to be idles while this runs.

Make the PIO program object multicore safe, too, so that if both cores
try to load a program they won't step on each other.

Fix some typos

Fixes #28

Update pico-sdk to 1.1.2

Add methods to block the opposite core while doing flash updates.
Ensure opposite core is stopped in LittleFS and EEPROM while doing
flash updates.

Update documentation with new calls.

Fixes #120

* add keywords file

* Add PWM function definitions

Support running code on the second core by adding a setup1() and/or
a loop1() routine to a sketch.  These functions operate exactly like
the normal Arduino ones, and anything they call will be run on
the second core automatically.

Add a simple multicore example.

Using the official Raspberry Pi Pico datasheet and the Adafruit Feather
RP2040 schematic, set the default pins for peripherals to match.

Fixes #92

Keep a per-core IRQ stack for noInterrupts since each core has its own
enable/disable.

Make analogRead/analogWrite multicore safe

Add a mutex around the Tone mapping for multicore safety.

Fix #104

Fixes #96

Fix #100

Can't have cores/rp2040/api in the include path because the Arduino API
dir has a "String.h" file.  On Windows, because it is case-insensitive
normally, this overrides the POSIX "string.h" header leading to bad
stuff.

Add manual redirect includes for commonly accessed headers in the
cores/rp2040 path instead.

Missing Size field was causing the Arduino 2.0 beta to reject the JSON.

Fixes #93

Thanks to @me-no-dev for pointing out that the Picoprobe does UART
passthrough!

Update the ArduinoAPI with new macros/inlines that allow accessing
values that are not naturally aligned (i.e. an int at address 0x0001).

Fixes #79

Last step before 1.0. Docs for readthedocs.io.

Update the I2S API to mimic others where `setXXX` is called before
`begin()` to set the GPIO pins used.

The SDK would assert if a flash write/erase happened past the end of the
flash space it was built with.  So, 8MB chips would crash when accessing
offset 3MB, for example.

Avoid this by specifying the maximum flash available so the SDK won't
trip.

Fixes #76

Pull in the ESP8266 File/Dir/etc. filesystem and port LittleFS
and SD/SDFS to the RP2040.

See https://arduino-esp8266.readthedocs.io/en/latest/filesystem.html
for more information

Using the PIO-driven I2S from pico-extras, add I2S output support.

Be sure to `git submodule update --init` to get the new directories.