Add DFRobot Beetle RP2040 boards V1.0.0 (#502)

tools/json/dfrobot_beetle_rp2040.json

+{
+  "build": {
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_DFROBOT_BEETLE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ]
+    ],
+    "mcu": "rp2040",
+    "arduino": {
+      "earlephilhower": {
+        "variant": "dfrobot_beetle_rp2040",
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x3343",
+        "usb_pid": "0x4253",
+        "usb_manufacturer": "DFRobot",
+        "usb_product": "Beetle RP2040"
+      }
+    }
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Beetle RP2040",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "DFRobot"
+}
\ No newline at end of file

tools/makeboards.py

@@ -225,6 +225,7 @@ BuildGlobalMenuList()
 # Raspberry Pi
 MakeBoard("rpipico", "Raspberry Pi", "Pico", "0x2e8a", "0x000a", 250, "RASPBERRY_PI_PICO", 2, "boot2_w25q080_2_padded_checksum")
 
+
 # Adafruit
 MakeBoard("adafruit_feather", "Adafruit", "Feather RP2040", "0x239a", "0x80f1", 250, "ADAFRUIT_FEATHER_RP2040", 8, "boot2_w25x10cl_4_padded_checksum")
 MakeBoard("adafruit_itsybitsy", "Adafruit", "ItsyBitsy RP2040", "0x239a", "0x80fd", 250, "ADAFRUIT_ITSYBITSY_RP2040", 8, "boot2_w25q080_2_padded_checksum")
@@ -244,6 +245,9 @@ MakeBoard("cytron_maker_pi_rp2040", "Cytron", "Maker Pi RP2040", "0x2e8a", "0x10
 # DeRuiLab
 MakeBoard("flyboard2040_core", "DeRuiLab", "FlyBoard2040Core", "0x2e8a", "0x008a", 500, "FLYBOARD2040_CORE", 4, "boot2_generic_03h_4_padded_checksum")
 
+# DFRobot
+MakeBoard("dfrobot_beetle_rp2040", "DFRobot", "Beetle RP2040", "0x3343", "0x4253", 250, "DFROBOT_BEETLE_RP2040", 2, "boot2_w25q080_2_padded_checksum")
+
 # iLabs
 MakeBoard("challenger_2040_lora", "iLabs", "Challenger 2040 LoRa", "0x2e8a", "0x1023", 250, "CHALLENGER_2040_LORA_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("challenger_2040_wifi", "iLabs", "Challenger 2040 WiFi", "0x2e8a", "0x1006", 250, "CHALLENGER_2040_WIFI_RP2040", 8, "boot2_w25q080_2_padded_checksum")
@@ -269,4 +273,6 @@ MakeBoard("wiznet_5100s_evb_pico", "WIZnet", "W5100S-EVB-Pico", "0x2e8a", "0x100
 # Generic
 MakeBoard("generic", "Generic", "RP2040", "0x2e8a", "0xf00a", 250, "GENERIC_RP2040", 16, "boot2_generic_03h_4_padded_checksum")
 
+
+
 sys.stdout.close()

variants/dfrobot_beetle_rp2040/pins_arduino.h

+#pragma once
+
+// Pin definitions taken from:
+//    https://www.dfrobot.com
+
+// Not pinned out
+#define PIN_LED        (31u)
+
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+// Not pinned out
+#define PIN_SERIAL2_TX (31u)
+#define PIN_SERIAL2_RX (31u)
+
+// SPI
+#define PIN_SPI0_MISO  (0u)
+#define PIN_SPI0_MOSI  (3u)
+#define PIN_SPI0_SCK   (2u)
+#define PIN_SPI0_SS    (1u)
+
+// Not pinned out
+#define PIN_SPI1_MISO  (31u)
+#define PIN_SPI1_MOSI  (31u)
+#define PIN_SPI1_SCK   (31u)
+#define PIN_SPI1_SS    (31u)
+
+// Wire
+#define PIN_WIRE0_SDA  (31u)
+#define PIN_WIRE0_SCL  (31u)
+#define PIN_WIRE1_SDA  (26u)
+#define PIN_WIRE1_SCL  (27u)
+
+#define SERIAL_HOWMANY (2u)
+#define SPI_HOWMANY    (1u)
+#define WIRE_HOWMANY   (1u)
+
+#include "../generic/common.h"