Add new board variant: Cytron Maker UNO RP2040 (#1838)

package/package_pico_index.template.json

@@ -86,6 +86,9 @@
                   {
                      "name": "Cytron Maker Pi RP2040"
                   },
+                  {
+                     "name": "Cytron Maker UNO RP2040"
+                  },
                   {
                      "name": "DatanoiseTV PicoADK"
                   },

tools/json/cytron_maker_uno_rp2040.json

+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x1071"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_CYTRON_MAKER_UNO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x1071"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "cytron_maker_uno_rp2040"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Maker UNO RP2040",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe",
+      "pico-debug"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Cytron"
+}

tools/makeboards.py

@@ -370,6 +370,7 @@ MakeBoard("bridgetek_idm2040-7a", "BridgeTek", "IDM2040-7A", "0x2e8a", "0x1041",
 # Cytron
 MakeBoard("cytron_maker_nano_rp2040", "Cytron", "Maker Nano RP2040", "0x2e8a", "0x100f", 250, "CYTRON_MAKER_NANO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 MakeBoard("cytron_maker_pi_rp2040", "Cytron", "Maker Pi RP2040", "0x2e8a", "0x1000", 250, "CYTRON_MAKER_PI_RP2040", 2, "boot2_w25q080_2_padded_checksum")
+MakeBoard("cytron_maker_uno_rp2040", "Cytron", "Maker UNO RP2040", "0x2e8a", "0x1071", 250, "CYTRON_MAKER_UNO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 
 # DatanoiseTV
 MakeBoard("datanoisetv_picoadk", "DatanoiseTV", "PicoADK", "0x2e8a", "0x000a", 250, "DATANOISETV_PICOADK", 2, "boot2_w25q080_2_padded_checksum")

variants/cytron_maker_uno_rp2040/pins_arduino.h

+#pragma once
+
+// LEDs
+#define PIN_LED             (3u)
+
+
+// Neopixel
+#define PIN_NEOPIXEL        (25u)
+#define NUM_NEOPIXEL        (2u)
+#define PIN_RGB             PIN_NEOPIXEL
+
+// Buzzer
+#define PIN_BUZZER          (8u)
+
+// Button
+#define PIN_BUTTON	    (2u)
+
+
+
+// Serial 1
+#define PIN_SERIAL1_TX      (0u)
+#define PIN_SERIAL1_RX      (1u)
+
+// Serial 2 (Not pinned out)
+#define PIN_SERIAL2_TX      (31u)
+#define PIN_SERIAL2_RX      (31u)
+
+// SPI 0
+#define PIN_SPI0_MISO       (12u)
+#define PIN_SPI0_MOSI       (11u)
+#define PIN_SPI0_SCK        (10u)
+#define PIN_SPI0_SS         (13u)
+
+// SPI 1 (Not pinned out)
+#define PIN_SPI1_MISO       (31u)
+#define PIN_SPI1_MOSI       (31u)
+#define PIN_SPI1_SCK        (31u)
+#define PIN_SPI1_SS         (31u)
+
+// Wire
+#define PIN_WIRE0_SDA       (20u)
+#define PIN_WIRE0_SCL       (21u)
+
+#define PIN_WIRE1_SDA       (26u)
+#define PIN_WIRE1_SCL       (27u)
+
+
+
+#define SERIAL_HOWMANY      (1u)
+#define SPI_HOWMANY         (1u)
+#define WIRE_HOWMANY        (1u)
+
+#include "../generic/common.h"