Adding Dude's Cab board (#1933)

Adding Dude's Cab board (rp2040 based board for virtual pinball use)

package/package_pico_index.template.json

@@ -101,6 +101,9 @@
                   {
                      "name": "DFRobot Beetle RP2040"
                   },
+                  {
+                     "name": "L'atelier d'Arnoz DudesCab"
+                  },
                   {
                      "name": "ElectronicCats HunterCat NFC RP2040"
                   },

tools/json/DudesCab.json

+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x106F"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_RASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x106F"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "DudesCab"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "DudesCab",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe",
+      "pico-debug"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "L'atelier d'Arnoz"
+}

tools/makeboards.py

@@ -386,6 +386,10 @@ MakeBoard("flyboard2040_core", "DeRuiLab", "FlyBoard2040Core", "0x2e8a", "0x008a
 # DFRobot
 MakeBoard("dfrobot_beetle_rp2040", "DFRobot", "Beetle RP2040", "0x3343", "0x4253", 250, "DFROBOT_BEETLE_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 
+# DudesCab
+MakeBoard("DudesCab", "L'atelier d'Arnoz", "DudesCab", "0x2e8a", "0x106F", 250, "RASPBERRY_PI_PICO", 4, "boot2_w25q080_2_padded_checksum")
+
+
 # ElectronicCat
 MakeBoard("electroniccats_huntercat_nfc", "ElectronicCats", "HunterCat NFC RP2040", "0x2E8A", "0x1037", 500, "ELECTRONICCATS_HUNTERCAT_NFC", 2, "boot2_w25q080_2_padded_checksum")
 

variants/DudesCab/pins_arduino.h

+#pragma once
+
+// Pin definitions taken from:
+//    https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf
+
+
+// LEDs
+#define PIN_LED        (25u)
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI
+#define PIN_SPI0_MISO  (4u)
+#define PIN_SPI0_MOSI  (3u)
+#define PIN_SPI0_SCK   (2u)
+#define PIN_SPI0_SS    (5u)
+
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (15u)
+#define PIN_SPI1_SCK   (14u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (18u)
+#define PIN_WIRE0_SCL  (19u)
+
+#define PIN_WIRE1_SDA  (10u)
+#define PIN_WIRE1_SCL  (11u)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"