Unverified Commit 361b4e08 authored by Earle F. Philhower, III's avatar Earle F. Philhower, III Committed by GitHub

Allow uploading huge files to WebServer (#2180)

From https://github.com/espressif/arduino-esp32/pull/9440
parent fa2bfdc2
# Upload Huge File To Filesystem Over HTTP
This project is an example of an HTTP server designed to facilitate the transfer of large files using the PUT method, in accordance with RFC specifications.
### Example cURL Command
```bash
curl -X PUT -T ./my-file.mp3 http://pico-ip/upload/my-file.mp3
```
## Resources
- RFC HTTP/1.0 - Additional Request Methods - PUT : [Link](https://datatracker.ietf.org/doc/html/rfc1945#appendix-D.1.1)
#include <WiFi.h>
#include <WiFiClient.h>
#include <WebServer.h>
#include <uri/UriRegex.h>
#include <LittleFS.h>
#ifndef STASSID
#define STASSID "your-ssid"
#define STAPSK "your-password"
#endif
const char *ssid = STASSID;
const char *password = STAPSK;
WebServer server(80);
File rawFile;
void handleCreate() {
server.send(200, "text/plain", "");
}
void handleCreateProcess() {
String path = "/" + server.pathArg(0);
HTTPRaw& raw = server.raw();
if (raw.status == RAW_START) {
if (LittleFS.exists((char *)path.c_str())) {
LittleFS.remove((char *)path.c_str());
}
rawFile = LittleFS.open(path.c_str(), "w");
Serial.print("Upload: START, filename: ");
Serial.println(path);
} else if (raw.status == RAW_WRITE) {
if (rawFile) {
rawFile.write(raw.buf, raw.currentSize);
}
Serial.print("Upload: WRITE, Bytes: ");
Serial.println(raw.currentSize);
} else if (raw.status == RAW_END) {
if (rawFile) {
rawFile.close();
}
Serial.print("Upload: END, Size: ");
Serial.println(raw.totalSize);
}
}
void returnFail(String msg) {
server.send(500, "text/plain", msg + "\r\n");
}
void handleNotFound() {
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET) ? "GET" : "POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i = 0; i < server.args(); i++) {
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
}
server.send(404, "text/plain", message);
}
void setup(void) {
Serial.begin(115200);
LittleFS.begin();
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
server.on(UriRegex("/upload/(.*)"), HTTP_PUT, handleCreate, handleCreateProcess);
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}
void loop(void) {
server.handleClient();
delay(2);//allow the cpu to switch to other tasks
}
......@@ -31,6 +31,7 @@
enum HTTPUploadStatus { UPLOAD_FILE_START, UPLOAD_FILE_WRITE, UPLOAD_FILE_END,
UPLOAD_FILE_ABORTED
};
enum HTTPRawStatus { RAW_START, RAW_WRITE, RAW_END, RAW_ABORTED };
enum HTTPClientStatus { HC_NONE, HC_WAIT_READ, HC_WAIT_CLOSE };
enum HTTPAuthMethod { BASIC_AUTH, DIGEST_AUTH };
......@@ -40,6 +41,10 @@ enum HTTPAuthMethod { BASIC_AUTH, DIGEST_AUTH };
#define HTTP_UPLOAD_BUFLEN 1436
#endif
#ifndef HTTP_RAW_BUFLEN
#define HTTP_RAW_BUFLEN 1436
#endif
#define HTTP_MAX_DATA_WAIT 5000 //ms to wait for the client to send the request
#define HTTP_MAX_DATA_AVAILABLE_WAIT 30 //ms to wait for the client to send the request when there is another client with data available
#define HTTP_MAX_POST_WAIT 5000 //ms to wait for POST data to arrive
......@@ -63,6 +68,16 @@ typedef struct {
uint8_t buf[HTTP_UPLOAD_BUFLEN];
} HTTPUpload;
typedef struct {
HTTPRawStatus status;
size_t totalSize; // content size
size_t currentSize; // size of data currently in buf
uint8_t buf[HTTP_UPLOAD_BUFLEN];
void *data; // additional data
} HTTPRaw;
#include "detail/RequestHandler.h"
namespace fs {
......@@ -97,6 +112,9 @@ public:
HTTPUpload& upload() {
return *_currentUpload;
}
HTTPRaw& raw() {
return *_currentRaw;
}
String pathArg(unsigned int i); // get request path argument by number
String arg(String name); // get request argument value by name
......@@ -257,6 +275,7 @@ protected:
RequestArgument* _postArgs;
std::unique_ptr<HTTPUpload> _currentUpload;
std::unique_ptr<HTTPRaw> _currentRaw;
int _headerKeysCount;
RequestArgument* _currentHeaders;
......
......@@ -188,7 +188,30 @@ HTTPServer::ClientFuture HTTPServer::_parseRequest(WiFiClient* client) {
}
}
if (!isForm) {
if (!isForm && _currentHandler && _currentHandler->canRaw(_currentUri)) {
log_v("Parse raw");
_currentRaw.reset(new HTTPRaw());
_currentRaw->status = RAW_START;
_currentRaw->totalSize = 0;
_currentRaw->currentSize = 0;
log_v("Start Raw");
_currentHandler->raw(*this, _currentUri, *_currentRaw);
_currentRaw->status = RAW_WRITE;
while (_currentRaw->totalSize < (size_t)_clientContentLength) {
_currentRaw->currentSize = client->readBytes(_currentRaw->buf, HTTP_RAW_BUFLEN);
_currentRaw->totalSize += _currentRaw->currentSize;
if (_currentRaw->currentSize == 0) {
_currentRaw->status = RAW_ABORTED;
_currentHandler->raw(*this, _currentUri, *_currentRaw);
return CLIENT_MUST_STOP;
}
_currentHandler->raw(*this, _currentUri, *_currentRaw);
}
_currentRaw->status = RAW_END;
_currentHandler->raw(*this, _currentUri, *_currentRaw);
log_v("Finish Raw");
} else if (!isForm) {
size_t plainLength;
char* plainBuf = readBytesWithTimeout(client, _clientContentLength, plainLength, HTTP_MAX_POST_WAIT);
if ((int)plainLength < (int)_clientContentLength) {
......@@ -333,7 +356,7 @@ void HTTPServer::_uploadWriteByte(uint8_t b) {
_currentUpload->buf[_currentUpload->currentSize++] = b;
}
int HTTPServer::_uploadReadByte(WiFiClient* client) {
int HTTPServer::_uploadReadByte(WiFiClient * client) {
int res = client->read();
if (res < 0) {
// keep trying until you either read a valid byte or timeout
......@@ -376,7 +399,7 @@ int HTTPServer::_uploadReadByte(WiFiClient* client) {
return res;
}
bool HTTPServer::_parseForm(WiFiClient* client, String boundary, uint32_t len) {
bool HTTPServer::_parseForm(WiFiClient * client, String boundary, uint32_t len) {
(void) len;
log_v("Parse Form: Boundary: %s Length: %d", boundary.c_str(), len);
String line;
......@@ -595,7 +618,7 @@ readfile:
return false;
}
String HTTPServer::urlDecode(const String& text) {
String HTTPServer::urlDecode(const String & text) {
String decoded = "";
char temp[] = "0x00";
unsigned int len = text.length();
......
......@@ -171,6 +171,7 @@ void WebServerTemplate<ServerType, DefaultPort>::handleClient() {
}
_currentStatus = HC_NONE;
_currentUpload.reset();
_currentRaw.reset();
}
if (callYield) {
......
......@@ -15,6 +15,10 @@ public:
(void) uri;
return false;
}
virtual bool canRaw(String uri) {
(void) uri;
return false;
}
virtual bool handle(HTTPServer& server, HTTPMethod requestMethod, String requestUri) {
(void) server;
(void) requestMethod;
......@@ -26,6 +30,11 @@ public:
(void) requestUri;
(void) upload;
}
virtual void raw(HTTPServer& server, String requestUri, HTTPRaw& raw) {
(void) server;
(void) requestUri;
(void) raw;
}
RequestHandler* next() {
return _next;
......
......@@ -42,6 +42,14 @@ public:
return true;
}
bool canRaw(String requestUri) override {
(void) requestUri;
if (!_ufn || _method == HTTP_GET) {
return false;
}
return true;
}
bool handle(HTTPServer& server, HTTPMethod requestMethod, String requestUri) override {
(void) server;
......@@ -61,6 +69,14 @@ public:
}
}
void raw(HTTPServer& server, String requestUri, HTTPRaw& raw) override {
(void)server;
(void)raw;
if (canRaw(requestUri)) {
_ufn();
}
}
protected:
HTTPServer::THandlerFunction _fn;
HTTPServer::THandlerFunction _ufn;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment