GitLab

* set a reset pin if RESET_PIN is defined in variant.h

* move setting of reset pin to wiring.c

* remove leftover code

* In support of 'issue' #183 - Add Black Magic Probe (BMP) upload method
This is basically a merge of work done by @rogerclarkmelbourne in arduino-nRF5-customised, with the addition of bootloader uploading as per @sandeepmistry openocd reference in platform.txt
Note: This incorporates changes based off feedback from @sandeepmistry, @dmikhalsky, @dlabun
* README.md - BMP driver installation details
* platform.txt - BMP tool setup
* programmers.txt - Add BMP as a programmer option

* In support of 'issue' #183 - Add Black Magic Probe (BMP) upload method
This is basically a merge of work done by @rogerclarkmelbourne in arduino-nRF5-customised, with the addition of bootloader uploading as per @sandeepmistry openocd reference in platform.txt
Note: This incorporates changes based off feedback from @sandeepmistry, @dmikhalsky, @dlabun
* README.md - BMP driver installation details
* platform.txt - BMP tool setup
* programmers.txt - Add BMP as a programmer option

* Update programmers.txt

Remove accidental references to sandeepmistry:openocd for openocd methods

* Update programmers.txt

* * rename bmp programmer to the more descriptive blackmagicprobe

* * remove accidental addition of bootloader.tool to openocd methods

add support for Electronut labs hackaBLE module

Use falling edge polarity for PWM to match standard Arduino

Fix stopBit = false mode in nRF51 Wire library

Add support for second SPI HW device

Set nRF51 default ADC to 1/3 prescaler and 1/3 reference voltage

So that the ADC input range is configured from 0 to Vdd instead of the
current 0 to 3.6V.

* clarify effects of lfclk selection

As per Softdevice changelog "Synthesized low frequency clock source is not tested or intended for use with BLE stack."
Also https://devzone.nordicsemi.com/question/953/what-low-frequency-clock-sources-can-i-use/?answer=955#post-id-955
Maybe option should better be removed?

* implications of soft device selection

* add S132, adhere SoC to naming, add versions

according to SoftDevice releasenotes

* incorporate suggestions

Fix nRF51 I2C read operation

Fix ADC prescaler reg config, add prescaler options

* Add NFR51 Smart Beacon Kit to Boards

* Remove PCA20006 flag from Generic

* Fix Flags and Board Variant

* Fiz typos on Boards.txt

* Fix Wire (I2C) Lib

* Revert "Fiz typos on Boards.txt"

This reverts commit 7320c2a9df428828938d1e037ecba57251ca597f.

* Revert "Fix Wire (I2C) Lib"

This reverts commit 911d76d20af987cc2679fbacab47f7100d220ae9.

* Update Boards, Remove I2C changes made at this branch

* Change Variant Pin Mapping and Menu Placement

Correct license in read me

Fix minor markup error in README.md

* first pass at tinyble variant

* TinyBLE: fix name

* TinyBLE: board fixes

* TinyBLE: fix crystal

* TinyBLE: board fixes

* TinyBLE: fix pins

* TinyBLE: add to tests

* TinyBLE: fix default programmer

* TinyBLE: fix default programmer

* fix NUM_DIGITAL_PINS based on current understand of rules

* Add SDA and SCL pin constants to variant definitions

* consolidating custom .interface keys to more standard .protocol keys

* platform.txt fix spelling

* fix microbit target

Remove unused interrupt from nRF51 Wire lib

Add SDA and SCL pin constants to variant definitions.

Linux install instructions

Fix RTC1 EVTENSET/INTENSET and RTC1_IRQHandler

Set CMSIS-DAP as the default uploader for the micro:bit

micro:bit new website

the micro:bit site has changed to the one given in this PR

  - Correction of EVTENSET/INTENSET

Set microbit build.board value