adds Calliope mini V3 to the library (#518)

* added mini3

* adds calliope pins, working

* update readme

* adds mini V3 to workflow

.github/workflows/compile.yml

@@ -18,6 +18,7 @@ jobs:
           - BBCmicrobit
           - BBCmicrobitV2
           - CalliopeMini
+          - CalliopeminiV3
           - Generic_nRF51822:chip=xxac
           - Generic_nRF52832
           - Generic_nRF52833

README.md

@@ -82,7 +82,7 @@ Become a sponsor and get your logo on our README on Github with a link to your s
 
 ### nRF52833
  * [BBC micro:bit v2](https://microbit.org/new-microbit/)
-
+ * [Calliope mini V3](https://calliope.cc/calliope-mini-3)
 ### nRF52
  * [Plain nRF52 MCU](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832)
  * [Nordic Semiconductor nRF52 DK](https://www.nordicsemi.com/eng/Products/Bluetooth-Smart-Bluetooth-low-energy/nRF52-DK)

boards.txt

@@ -534,6 +534,38 @@ CalliopeMini.menu.softdevice.s130.upload.maximum_size=151552
 CalliopeMini.menu.softdevice.s130.build.extra_flags=-DNRF51 -DS130 -DNRF51_S130
 CalliopeMini.menu.softdevice.s130.build.ldscript=armgcc_s130_nrf51822_xxaa.ld
 
+CalliopeminiV3.name=Calliope mini V3
+
+CalliopeminiV3.vid.0=0x0d28
+CalliopeminiV3.pid.0=0x0204
+
+CalliopeminiV3.upload.tool=sandeepmistry:openocd
+CalliopeminiV3.upload.protocol=cmsis-dap
+CalliopeminiV3.upload.target=nrf52
+CalliopeminiV3.upload.maximum_size=524288
+CalliopeminiV3.upload.setup_command=transport select swd;
+CalliopeminiV3.upload.use_1200bps_touch=false
+CalliopeminiV3.upload.wait_for_upload_port=false
+CalliopeminiV3.upload.native_usb=false
+
+CalliopeminiV3.bootloader.tool=sandeepmistry:openocd
+
+CalliopeminiV3.build.mcu=cortex-m4
+CalliopeminiV3.build.f_cpu=64000000
+CalliopeminiV3.build.board=CALLIOPE_MINI_V3
+CalliopeminiV3.build.core=nRF5
+CalliopeminiV3.build.variant=CalliopeminiV3
+CalliopeminiV3.build.variant_system_lib=
+CalliopeminiV3.build.extra_flags=-DNRF52833_XXAA
+CalliopeminiV3.build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16
+CalliopeminiV3.build.ldscript=nrf52833_xxaa.ld
+
+CalliopeminiV3.build.lfclk_flags=-DUSE_LFSYNT
+
+CalliopeminiV3.menu.softdevice.none=None
+CalliopeminiV3.menu.softdevice.none.softdevice=none
+CalliopeminiV3.menu.softdevice.none.softdeviceversion=
+
 BluzDK.name=Bluz DK
 
 BluzDK.upload.tool=sandeepmistry:openocd

variants/CalliopeminiV3/pins_arduino.h

+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+// API compatibility
+#include "variant.h"

variants/CalliopeminiV3/variant.cpp

+/* Pins for Calliope mini V3 
+This file connects the hardware pin numbers on the left to the array position. 
+In Arduino IDE this array position is usually used when calling a pin by number, 
+e.g. pinMode(5, INPUT) sets BTN A to input mode */
+
+#include "variant.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+  // 0 - 4
+  2,  // A0, PAD 0
+  3,  // A1, PAD 1
+  4,  // A2, PAD 2
+  35, // Pad 3, not analog (Calliope exclusive pin)
+  28, // A4, COL1
+
+  // 5 - 9
+  14, // BTN A
+  37, // COL4, P1.05
+  11, // COL2
+  10, // NFC2
+  9,  // NFC1
+
+  // 10-16
+  30, // A5, COL5
+  23, // BTN B
+  12,
+  17, // SCK
+  1,  // MISO
+  13, // MOSI
+  29, // A5, C16_A1RX (Calliope change)
+
+  // 17 + 18
+  34, // P1.02 C17 (Calliope exclusive pin)
+  31, // A3, COL3 (Calliope changed pin number)
+
+  // 19 + 20
+  26, // SCL
+  32, // SDA, P1.00
+
+  // 21 - 25
+  21, // ROW1
+  22, // ROW2
+  15, // ROW3
+  24, // ROW4
+  19, // ROW5
+
+  // 26 - 29
+  36, // LOGO (touch sensor)
+  0,  // SPEAKER (Note: Must use synthesized LF clock to make this pin available)
+  20, // RUN_MIC
+  5,  // A6, MIC_IN
+
+  // 30 - 31
+  16, // I2C_INT_SDA
+  8,  // I2C_INT_SCL
+
+  // 32 - 34
+  25, // COMBINED_SENSOR_INT
+  40, // RX, P1.08
+  6,  // TX
+  
+  // 35 - 40 internal Calliope mini pins
+  7, // RGB
+  38, // MOTOR_MODE
+  33, // M0_DIR
+  27, // M0_SPEED
+  39, // M1_DIR
+  41, // M1_SPEED  
+};

variants/CalliopeminiV3/variant.h

+#ifndef _CALLIOPE_MINI_V3_
+#define _CALLIOPE_MINI_V3_
+
+// Master clock frequency
+
+#define VARIANT_MCK (64000000ul)
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+
+#define PINS_COUNT			(41)
+#define NUM_DIGITAL_PINS	(41)
+#define NUM_ANALOG_INPUTS	(7)
+#define NUM_ANALOG_OUTPUTS	(0)
+
+// LEDs
+
+#define PIN_LED             (13) // This goes to Calliope mini header C12 (not a built in LED)
+#define LED_BUILTIN         PIN_LED
+
+// Buttons
+
+#define PIN_BUTTON_A		(5)
+#define PIN_BUTTON_B		(11)
+
+// Analog pins
+
+#define PIN_A0				(0)
+#define PIN_A1				(1)
+#define PIN_A2				(2)
+#define PIN_A3				(3)
+#define PIN_A4				(4)
+#define PIN_A5				(10)
+#define PIN_A6				(29)
+
+#define ADC_RESOLUTION 10
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+static const uint8_t A6 = PIN_A6;
+
+// Serial
+
+#define PIN_SERIAL_RX		(33)
+#define PIN_SERIAL_TX		(34)
+
+// SPI
+
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO		(14)
+#define PIN_SPI_MOSI		(15)
+#define PIN_SPI_SCK			(13)
+
+// Wire Interfaces (external and internal)
+
+#define WIRE_INTERFACES_COUNT 2
+
+#define PIN_WIRE_SDA		(20)
+#define PIN_WIRE_SCL		(19)
+
+#define PIN_WIRE1_SDA       (30)
+#define PIN_WIRE1_SCL       (31)
+
+#ifdef __cplusplus
+
+// Calliope internal pins
+#define PIN_RGB (35)
+#define PIN_M_MODE (36)
+#define PIN_M0_DIR (37)
+#define PIN_M0_SPEED (38)
+#define PIN_M1_DIR (39)
+#define PIN_M1_SPEED (40)
+}
+#endif // __cplusplus
+
+#endif