Add softdevice headers and .ld files

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/ble_err.h

+/* 
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ * 
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ * 
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ * 
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ * 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+/**
+  @addtogroup BLE_COMMON
+  @{
+  @addtogroup  nrf_error
+  @{
+    @ingroup BLE_COMMON
+  @}
+
+  @defgroup ble_err General error codes
+  @{
+
+  @brief General error code definitions for the BLE API.
+
+  @ingroup BLE_COMMON
+*/
+#ifndef NRF_BLE_ERR_H__
+#define NRF_BLE_ERR_H__
+
+#include "nrf_error.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* @defgroup BLE_ERRORS Error Codes
+ * @{ */
+#define BLE_ERROR_NOT_ENABLED            (NRF_ERROR_STK_BASE_NUM+0x001) /**< @ref sd_ble_enable has not been called. */
+#define BLE_ERROR_INVALID_CONN_HANDLE    (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid connection handle. */
+#define BLE_ERROR_INVALID_ATTR_HANDLE    (NRF_ERROR_STK_BASE_NUM+0x003) /**< Invalid attribute handle. */
+#define BLE_ERROR_NO_TX_PACKETS          (NRF_ERROR_STK_BASE_NUM+0x004) /**< Not enough application packets available on this connection. */
+#define BLE_ERROR_INVALID_ROLE           (NRF_ERROR_STK_BASE_NUM+0x005) /**< Invalid role. */
+/** @} */
+
+
+/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges
+ *  @brief Assignment of subranges for module specific error codes.
+ *  @note For specific error codes, see ble_<module>.h or ble_error_<module>.h.
+ * @{ */
+#define NRF_L2CAP_ERR_BASE             (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */
+#define NRF_GAP_ERR_BASE               (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */
+#define NRF_GATTC_ERR_BASE             (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */
+#define NRF_GATTS_ERR_BASE             (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+
+/**
+  @}
+  @}
+*/

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/ble_hci.h

+/* 
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ * 
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ * 
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ * 
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ * 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+/**
+  @addtogroup BLE_COMMON 
+  @{
+*/
+
+
+#ifndef BLE_HCI_H__
+#define BLE_HCI_H__ 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
+ * @{ */
+
+#define BLE_HCI_STATUS_CODE_SUCCESS                        0x00   /**< Success. */
+#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND           0x01   /**< Unknown BLE Command. */
+#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER  0x02   /**< Unknown Connection Identifier. */
+/*0x03 Hardware Failure
+0x04 Page Timeout
+*/
+#define BLE_HCI_AUTHENTICATION_FAILURE                     0x05   /**< Authentication Failure. */
+#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING             0x06   /**< Pin or Key missing. */
+#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED                   0x07   /**< Memory Capacity Exceeded. */
+#define BLE_HCI_CONNECTION_TIMEOUT                         0x08   /**< Connection Timeout. */
+/*0x09 Connection Limit Exceeded
+0x0A Synchronous Connection Limit To A Device Exceeded
+0x0B ACL Connection Already Exists*/
+#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED             0x0C   /**< Command Disallowed. */
+/*0x0D Connection Rejected due to Limited Resources
+0x0E Connection Rejected Due To Security Reasons
+0x0F Connection Rejected due to Unacceptable BD_ADDR
+0x10 Connection Accept Timeout Exceeded
+0x11 Unsupported Feature or Parameter Value*/
+#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12  /**< Invalid BLE Command Parameters. */
+#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION           0x13  /**< Remote User Terminated Connection. */
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14  /**< Remote Device Terminated Connection due to low resources.*/
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF     0x15  /**< Remote Device Terminated Connection due to power off. */
+#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION            0x16  /**< Local Host Terminated Connection. */
+/*
+0x17 Repeated Attempts
+0x18 Pairing Not Allowed
+0x19 Unknown LMP PDU
+*/
+#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A                   /**< Unsupported Remote Feature. */
+/*
+0x1B SCO Offset Rejected
+0x1C SCO Interval Rejected
+0x1D SCO Air Mode Rejected*/
+#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS     0x1E       /**< Invalid LMP Parameters. */
+#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR          0x1F       /**< Unspecified Error. */
+/*0x20 Unsupported LMP Parameter Value
+0x21 Role Change Not Allowed
+*/
+#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT       0x22       /**< LMP Response Timeout. */
+/*0x23 LMP Error Transaction Collision*/
+#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED        0x24       /**< LMP PDU Not Allowed. */
+/*0x25 Encryption Mode Not Acceptable
+0x26 Link Key Can Not be Changed
+0x27 Requested QoS Not Supported
+*/
+#define BLE_HCI_INSTANT_PASSED                         0x28       /**< Instant Passed. */
+#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED      0x29       /**< Pairing with Unit Key Unsupported. */
+#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION        0x2A       /**< Different Transaction Collision. */
+/*
+0x2B Reserved
+0x2C QoS Unacceptable Parameter
+0x2D QoS Rejected
+0x2E Channel Classification Not Supported
+0x2F Insufficient Security
+0x30 Parameter Out Of Mandatory Range
+0x31 Reserved
+0x32 Role Switch Pending
+0x33 Reserved
+0x34 Reserved Slot Violation
+0x35 Role Switch Failed
+0x36 Extended Inquiry Response Too Large
+0x37 Secure Simple Pairing Not Supported By Host.
+0x38 Host Busy - Pairing
+0x39 Connection Rejected due to No Suitable Channel Found*/
+#define BLE_HCI_CONTROLLER_BUSY                        0x3A       /**< Controller Busy. */
+#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE             0x3B       /**< Connection Interval Unacceptable. */
+#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT            0x3C       /**< Directed Adverisement Timeout. */
+#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE     0x3D       /**< Connection Terminated due to MIC Failure. */
+#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED          0x3E       /**< Connection Failed to be Established. */
+
+/** @} */
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif // BLE_HCI_H__
+
+/** @} */

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/ble_l2cap.h

+/*
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/**
+  @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
+  @{
+  @brief Definitions and prototypes for the L2CAP interface.
+ */
+
+#ifndef BLE_L2CAP_H__
+#define BLE_L2CAP_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_err.h"
+#include "nrf_svc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations
+ * @{ */
+
+/**@brief L2CAP API SVC numbers. */
+enum BLE_L2CAP_SVCS
+{
+  SD_BLE_L2CAP_CID_REGISTER = BLE_L2CAP_SVC_BASE,  /**< Register a CID. */
+  SD_BLE_L2CAP_CID_UNREGISTER,                     /**< Unregister a CID. */
+  SD_BLE_L2CAP_TX                                  /**< Transmit a packet. */
+};
+
+/**@brief L2CAP Event IDs. */
+enum BLE_L2CAP_EVTS
+{
+  BLE_L2CAP_EVT_RX  = BLE_L2CAP_EVT_BASE          /**< L2CAP packet received. */
+};
+
+/** @} */
+
+/**@addtogroup BLE_L2CAP_DEFINES Defines
+ * @{ */
+
+/**@defgroup BLE_ERRORS_L2CAP SVC return values specific to L2CAP
+ * @{ */
+#define BLE_ERROR_L2CAP_CID_IN_USE            (NRF_L2CAP_ERR_BASE + 0x000)  /**< CID already in use. */
+/** @} */
+
+/**@brief Default L2CAP MTU. */
+#define BLE_L2CAP_MTU_DEF           (23)
+
+/**@brief Invalid Channel Identifier. */
+#define BLE_L2CAP_CID_INVALID       (0x0000)
+
+/**@brief Dynamic Channel Identifier base. */
+#define BLE_L2CAP_CID_DYN_BASE      (0x0040)
+
+/**@brief Maximum amount of dynamic CIDs. */
+#define BLE_L2CAP_CID_DYN_MAX       (8)
+
+/** @} */
+
+/**@addtogroup BLE_L2CAP_STRUCTURES Structures
+ * @{ */
+
+/**@brief Packet header format for L2CAP transmission. */
+typedef struct
+{
+  uint16_t   len;                                 /**< Length of valid info in data member. */
+  uint16_t   cid;                                 /**< Channel ID on which packet is transmitted. */
+} ble_l2cap_header_t;
+
+
+/**@brief L2CAP Received packet event report. */
+typedef struct
+{
+  ble_l2cap_header_t header;                      /**< L2CAP packet header. */
+  uint8_t    data[1];                             /**< Packet data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
+                                                       See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
+} ble_l2cap_evt_rx_t;
+
+
+/**@brief L2CAP event callback event structure. */
+typedef struct
+{
+  uint16_t conn_handle;                           /**< Connection Handle on which event occured. */
+  union
+  {
+    ble_l2cap_evt_rx_t rx;                        /**< RX Event parameters. */
+  } params;                                       /**< Event Parameters. */
+} ble_l2cap_evt_t;
+
+/** @} */
+
+/**@addtogroup BLE_L2CAP_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Register a CID with L2CAP.
+ *
+ * @details This registers a higher protocol layer with the L2CAP multiplexer, and is requried prior to all operations on the CID.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_L2CAP_API_MSC}
+ * @endmscs
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @retval ::NRF_SUCCESS Successfully registered a CID with the L2CAP layer.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CID must be above @ref BLE_L2CAP_CID_DYN_BASE.
+ * @retval ::BLE_ERROR_L2CAP_CID_IN_USE L2CAP CID already in use.
+ * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_L2CAP_CID_REGISTER, uint32_t, sd_ble_l2cap_cid_register(uint16_t cid));
+
+/**@brief Unregister a CID with L2CAP.
+ *
+ * @details This unregisters a previously registerd higher protocol layer with the L2CAP multiplexer.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_L2CAP_API_MSC}
+ * @endmscs
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @retval ::NRF_SUCCESS Successfully unregistered the CID.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @retval ::NRF_ERROR_NOT_FOUND CID not previously registered.
+ */
+SVCALL(SD_BLE_L2CAP_CID_UNREGISTER, uint32_t, sd_ble_l2cap_cid_unregister(uint16_t cid));
+
+/**@brief Transmit an L2CAP packet.
+ *
+ * @note    It is important to note that a call to this function will <b>consume an application packet</b>, and will therefore
+ *          generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted.
+ *          Please see the documentation of @ref sd_ble_tx_packet_count_get for more details.
+ *
+ * @events
+ * @event{@ref BLE_EVT_TX_COMPLETE}
+ * @event{@ref BLE_L2CAP_EVT_RX}
+ * @endevents
+ *
+ * @mscs
+ * @mmsc{@ref BLE_L2CAP_API_MSC}
+ * @endmscs
+ *
+ * @param[in] conn_handle Connection Handle.
+ * @param[in] p_header    Pointer to a packet header containing length and CID.
+ * @param[in] p_data      Pointer to the data to be transmitted.
+ *
+ * @retval ::NRF_SUCCESS Successfully queued an L2CAP packet for transmission.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CIDs must be registered beforehand with @ref sd_ble_l2cap_cid_register.
+ * @retval ::NRF_ERROR_NOT_FOUND CID not found.
+ * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @retval ::BLE_ERROR_NO_TX_PACKETS Not enough application packets available.
+ * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, see @ref BLE_L2CAP_MTU_DEF.
+ */
+SVCALL(SD_BLE_L2CAP_TX, uint32_t, sd_ble_l2cap_tx(uint16_t conn_handle, ble_l2cap_header_t const *p_header, uint8_t const *p_data));
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+#endif // BLE_L2CAP_H__
+
+/**
+  @}
+*/

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/ble_ranges.h

+/* 
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ * 
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ * 
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ * 
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ * 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+/**
+  @addtogroup BLE_COMMON
+  @{
+  @defgroup ble_ranges Module specific SVC, event and option number subranges
+  @{
+
+  @brief Definition of SVC, event and option number subranges for each API module.
+
+  @note
+  SVCs, event and option numbers are split into subranges for each API module.
+  Each module receives its entire allocated range of SVC calls, whether implemented or not,
+  but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range.
+
+  Note that the symbols BLE_<module>_SVC_LAST is the end of the allocated SVC range,
+  rather than the last SVC function call actually defined and implemented.
+
+  Specific SVC, event and option values are defined in each module's ble_<module>.h file,
+  which defines names of each individual SVC code based on the range start value.
+*/
+
+#ifndef BLE_RANGES_H__
+#define BLE_RANGES_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define BLE_SVC_BASE           0x60       /**< Common BLE SVC base. */
+#define BLE_SVC_LAST           0x6B       /**< Total: 12. */
+
+#define BLE_RESERVED_SVC_BASE  0x6C       /**< Reserved BLE SVC base. */
+#define BLE_RESERVED_SVC_LAST  0x6F       /**< Total: 4. */
+
+#define BLE_GAP_SVC_BASE       0x70       /**< GAP BLE SVC base. */
+#define BLE_GAP_SVC_LAST       0x8F       /**< Total: 32. */
+
+#define BLE_GATTC_SVC_BASE     0x90       /**< GATTC BLE SVC base. */
+#define BLE_GATTC_SVC_LAST     0x9F       /**< Total: 32. */
+
+#define BLE_GATTS_SVC_BASE     0xA0       /**< GATTS BLE SVC base. */
+#define BLE_GATTS_SVC_LAST     0xAF       /**< Total: 16. */
+
+#define BLE_L2CAP_SVC_BASE     0xB0       /**< L2CAP BLE SVC base. */
+#define BLE_L2CAP_SVC_LAST     0xBF       /**< Total: 16. */
+
+
+#define BLE_EVT_INVALID        0x00       /**< Invalid BLE Event. */
+
+#define BLE_EVT_BASE           0x01       /**< Common BLE Event base. */
+#define BLE_EVT_LAST           0x0F       /**< Total: 15. */
+
+#define BLE_GAP_EVT_BASE       0x10       /**< GAP BLE Event base. */
+#define BLE_GAP_EVT_LAST       0x2F       /**< Total: 32. */
+
+#define BLE_GATTC_EVT_BASE     0x30       /**< GATTC BLE Event base. */
+#define BLE_GATTC_EVT_LAST     0x4F       /**< Total: 32. */
+
+#define BLE_GATTS_EVT_BASE     0x50       /**< GATTS BLE Event base. */
+#define BLE_GATTS_EVT_LAST     0x6F       /**< Total: 32. */
+
+#define BLE_L2CAP_EVT_BASE     0x70       /**< L2CAP BLE Event base. */
+#define BLE_L2CAP_EVT_LAST     0x8F       /**< Total: 32.  */
+
+
+#define BLE_OPT_INVALID        0x00       /**< Invalid BLE Option. */
+
+#define BLE_OPT_BASE           0x01       /**< Common BLE Option base. */
+#define BLE_OPT_LAST           0x1F       /**< Total: 31. */
+
+#define BLE_GAP_OPT_BASE       0x20       /**< GAP BLE Option base. */
+#define BLE_GAP_OPT_LAST       0x3F       /**< Total: 32. */
+
+#define BLE_GATTC_OPT_BASE     0x40       /**< GATTC BLE Option base. */
+#define BLE_GATTC_OPT_LAST     0x5F       /**< Total: 32. */
+
+#define BLE_GATTS_OPT_BASE     0x60       /**< GATTS BLE Option base. */
+#define BLE_GATTS_OPT_LAST     0x7F       /**< Total: 32. */
+
+#define BLE_L2CAP_OPT_BASE     0x80       /**< L2CAP BLE Option base. */
+#define BLE_L2CAP_OPT_LAST     0x9F       /**< Total: 32.  */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BLE_RANGES_H__ */
+
+/**
+  @}
+  @}
+*/

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/nrf51/nrf_mbr.h

+/*
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/**
+  @defgroup nrf_mbr_api Master Boot Record API
+  @{
+
+  @brief APIs for updating SoftDevice and BootLoader
+
+*/
+
+/* Header guard */
+#ifndef NRF_MBR_H__
+#define NRF_MBR_H__
+
+#include "nrf_svc.h"
+#include <stdint.h>
+
+#ifndef NRF51
+#error "This header file shall only be included for nRF51 projects"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup NRF_MBR_DEFINES Defines
+ * @{ */
+
+/**@brief MBR SVC Base number. */
+#define MBR_SVC_BASE        (0x18)
+
+/**@brief Page size in words. */
+#define PAGE_SIZE_IN_WORDS 256
+/** @} */
+
+/** @brief The size that must be reserved for the MBR when a softdevice is written to flash.
+This is the offset where the first byte of the softdevice hex file is written.*/
+#define MBR_SIZE                (0x1000)
+
+/** @addtogroup NRF_MBR_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF Master Boot Record API SVC numbers. */
+enum NRF_MBR_SVCS
+{
+  SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */
+};
+
+/**@brief Possible values for ::sd_mbr_command_t.command */
+enum NRF_MBR_COMMANDS
+{
+  SD_MBR_COMMAND_COPY_BL,               /**< Copy a new BootLoader. @see sd_mbr_command_copy_bl_t */
+  SD_MBR_COMMAND_COPY_SD,               /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/
+  SD_MBR_COMMAND_INIT_SD,               /**< Init forwarding interrupts to SD, and run reset function in SD*/
+  SD_MBR_COMMAND_COMPARE,               /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/
+  SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Start forwarding all exception to this address @see ::sd_mbr_command_vector_table_base_set_t*/
+};
+
+/** @} */
+
+/** @addtogroup NRF_MBR_TYPES Types
+ * @{ */
+
+/**@brief This command copies part of a new SoftDevice
+ * The destination area is erased before copying.
+ * If dst is in the middle of a flash page, that whole flash page will be erased.
+ * If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
+ *
+ * The user of this function is responsible for setting the PROTENSET registers.
+ *
+ * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly.
+ * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying.
+ */
+typedef struct
+{
+  uint32_t *src;  /**< Pointer to the source of data to be copied.*/
+  uint32_t *dst;  /**< Pointer to the destination where the content is to be copied.*/
+  uint32_t len;   /**< Number of 32 bit words to copy. Must be a multiple of @ref PAGE_SIZE_IN_WORDS words.*/
+} sd_mbr_command_copy_sd_t;
+
+
+/**@brief This command works like memcmp, but takes the length in words.
+ *
+ * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal.
+ * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal.
+ */
+typedef struct
+{
+  uint32_t *ptr1; /**< Pointer to block of memory. */
+  uint32_t *ptr2; /**< Pointer to block of memory. */
+  uint32_t len;   /**< Number of 32 bit words to compare.*/
+} sd_mbr_command_compare_t;
+
+
+/**@brief This command copies a new BootLoader.
+ *  With this command, destination of BootLoader is always the address written in NRF_UICR->BOOTADDR.
+ *
+ *  Destination is erased by this function.
+ *  If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased.
+ *
+ *  This function will use PROTENSET to protect the flash that is not intended to be written.
+ *
+ *  On Success, this function will not return. It will start the new BootLoader from reset-vector as normal.
+ *
+ * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
+ * @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set.
+ * @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area.
+ */
+typedef struct
+{
+  uint32_t *bl_src;  /**< Pointer to the source of the Bootloader to be be copied.*/
+  uint32_t bl_len;   /**< Number of 32 bit words to copy for BootLoader. */
+} sd_mbr_command_copy_bl_t;
+
+/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR
+ *
+ * Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.
+ *
+ * To restore default forwarding this function should be called with @param address set to 0.
+ * The MBR will then start forwarding to interrupts to the address in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.
+ *
+ * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
+ * @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size.
+ */
+typedef struct
+{
+  uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
+} sd_mbr_command_vector_table_base_set_t;
+
+typedef struct
+{
+  uint32_t command;  /**< type of command to be issued see @ref NRF_MBR_COMMANDS. */
+  union
+  {
+    sd_mbr_command_copy_sd_t copy_sd;  /**< Parameters for copy SoftDevice.*/
+    sd_mbr_command_copy_bl_t copy_bl;  /**< Parameters for copy BootLoader.*/
+    sd_mbr_command_compare_t compare;  /**< Parameters for verify.*/
+    sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set.*/
+  } params;
+} sd_mbr_command_t;
+
+/** @} */
+
+/** @addtogroup NRF_MBR_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Issue Master Boot Record commands
+ *
+ * Commands used when updating a SoftDevice and bootloader.
+ *
+ * @param[in]  param Pointer to a struct describing the command.
+ *
+ *@note for retvals see ::sd_mbr_command_copy_sd_t ::sd_mbr_command_copy_bl_t ::sd_mbr_command_compare_t
+
+*/
+SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param));
+
+/** @} */
+#ifdef __cplusplus
+}
+#endif
+#endif // NRF_MBR_H__
+
+/**
+  @}
+*/

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/nrf_error.h

+/* 
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ * 
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ * 
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ * 
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ * 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */ 
+ /**
+  @defgroup nrf_error SoftDevice Global Error Codes
+  @{
+   
+  @brief Global Error definitions
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_H__
+#define NRF_ERROR_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions
+ * @{ */
+#define NRF_ERROR_BASE_NUM      (0x0)       ///< Global error base
+#define NRF_ERROR_SDM_BASE_NUM  (0x1000)    ///< SDM error base
+#define NRF_ERROR_SOC_BASE_NUM  (0x2000)    ///< SoC error base
+#define NRF_ERROR_STK_BASE_NUM  (0x3000)    ///< STK error base
+/** @} */
+
+#define NRF_SUCCESS                           (NRF_ERROR_BASE_NUM + 0)  ///< Successful command
+#define NRF_ERROR_SVC_HANDLER_MISSING         (NRF_ERROR_BASE_NUM + 1)  ///< SVC handler is missing
+#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED      (NRF_ERROR_BASE_NUM + 2)  ///< SoftDevice has not been enabled
+#define NRF_ERROR_INTERNAL                    (NRF_ERROR_BASE_NUM + 3)  ///< Internal Error
+#define NRF_ERROR_NO_MEM                      (NRF_ERROR_BASE_NUM + 4)  ///< No Memory for operation
+#define NRF_ERROR_NOT_FOUND                   (NRF_ERROR_BASE_NUM + 5)  ///< Not found
+#define NRF_ERROR_NOT_SUPPORTED               (NRF_ERROR_BASE_NUM + 6)  ///< Not supported
+#define NRF_ERROR_INVALID_PARAM               (NRF_ERROR_BASE_NUM + 7)  ///< Invalid Parameter
+#define NRF_ERROR_INVALID_STATE               (NRF_ERROR_BASE_NUM + 8)  ///< Invalid state, operation disallowed in this state
+#define NRF_ERROR_INVALID_LENGTH              (NRF_ERROR_BASE_NUM + 9)  ///< Invalid Length
+#define NRF_ERROR_INVALID_FLAGS               (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags
+#define NRF_ERROR_INVALID_DATA                (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data
+#define NRF_ERROR_DATA_SIZE                   (NRF_ERROR_BASE_NUM + 12) ///< Invalid Data size
+#define NRF_ERROR_TIMEOUT                     (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out
+#define NRF_ERROR_NULL                        (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer
+#define NRF_ERROR_FORBIDDEN                   (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation
+#define NRF_ERROR_INVALID_ADDR                (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address
+#define NRF_ERROR_BUSY                        (NRF_ERROR_BASE_NUM + 17) ///< Busy
+#define NRF_ERROR_CONN_COUNT                  (NRF_ERROR_BASE_NUM + 18) ///< Maximum connection count exceeded.
+#define NRF_ERROR_RESOURCES                   (NRF_ERROR_BASE_NUM + 19) ///< Not enough resources for operation
+
+#ifdef __cplusplus
+}
+#endif
+#endif // NRF_ERROR_H__
+
+/**
+  @}
+*/

cores/nRF5/nRF5_SDK_11/components/softdevice/s130/headers/nrf_error_sdm.h

+/*
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ *   4. This software must only be used in a processor manufactured by Nordic
+ *   Semiconductor ASA, or in a processor manufactured by a third party that
+ *   is used in combination with a processor manufactured by Nordic Semiconductor.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+ /**
+  @addtogroup nrf_sdm_api
+  @{
+  @defgroup nrf_sdm_error SoftDevice Manager Error Codes
+  @{
+
+  @brief Error definitions for the SDM API
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SDM_H__
+#define NRF_ERROR_SDM_H__
+
+#include "nrf_error.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN              (NRF_ERROR_SDM_BASE_NUM + 0)  ///< Unknown lfclk source.
+#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1)  ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts).
+#define NRF_ERROR_SDM_INCORRECT_CLENR0                  (NRF_ERROR_SDM_BASE_NUM + 2)  ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing).
+
+#ifdef __cplusplus
+}
+#endif
+#endif // NRF_ERROR_SDM_H__
+
+/**
+  @}
+  @}
+*/