User linker scripts from nRF5 SDK, simplify paths

boards.txt

@@ -38,7 +38,7 @@ nRF52DK.build.variant=nRF52DK
 nRF52DK.build.variant_system_lib=
 nRF52DK.build.extra_flags=-DNRF52
 nRF52DK.build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16
-nRF52DK.build.ldscript=linker_scripts/gcc/nRF52DK.ld
+nRF52DK.build.ldscript=nrf52_xxaa.ld
 
 
 
@@ -63,4 +63,4 @@ BluzDK.build.variant=BluzDK
 BluzDK.build.variant_system_lib=
 BluzDK.build.extra_flags=-DNRF51
 BluzDK.build.float_flags=
-BluzDK.build.ldscript=linker_scripts/gcc/BluzDK.ld
+BluzDK.build.ldscript=nrf51_xxac.ld

cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/gcc_nrf51_common.ld

+/* Linker script for Nordic Semiconductor nRF5 devices
+ *
+ * Version: Sourcery G++ 4.5-1
+ * Support: https://support.codesourcery.com/GNUToolchain/
+ *
+ * Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions.  No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+	.text :
+	{
+		KEEP(*(.Vectors))
+		*(.text*)
+
+		KEEP(*(.init))
+		KEEP(*(.fini))
+
+		/* .ctors */
+		*crtbegin.o(.ctors)
+		*crtbegin?.o(.ctors)
+		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+		*(SORT(.ctors.*))
+		*(.ctors)
+
+		/* .dtors */
+ 		*crtbegin.o(.dtors)
+ 		*crtbegin?.o(.dtors)
+ 		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ 		*(SORT(.dtors.*))
+ 		*(.dtors)
+
+		*(.rodata*)
+
+		*(.eh_frame*)
+		. = ALIGN(4);
+	} > FLASH
+    
+
+	.ARM.extab : 
+	{
+		*(.ARM.extab* .gnu.linkonce.armextab.*)
+		. = ALIGN(4);
+	} > FLASH
+
+	__exidx_start = .;
+	.ARM.exidx :
+	{
+		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
+		. = ALIGN(4);
+	} > FLASH
+	__exidx_end = .;
+
+	__etext = .;
+		
+	.data : AT (__etext)
+	{
+		__data_start__ = .;
+		*(vtable)
+		*(.data*)
+
+		. = ALIGN(4);
+		/* preinit data */
+		PROVIDE_HIDDEN (__preinit_array_start = .);
+		*(.preinit_array)
+		PROVIDE_HIDDEN (__preinit_array_end = .);
+
+		. = ALIGN(4);
+		/* init data */
+		PROVIDE_HIDDEN (__init_array_start = .);
+		*(SORT(.init_array.*))
+		*(.init_array)
+		PROVIDE_HIDDEN (__init_array_end = .);
+
+
+		. = ALIGN(4);
+		/* finit data */
+		PROVIDE_HIDDEN (__fini_array_start = .);
+		*(SORT(.fini_array.*))
+		*(.fini_array)
+		PROVIDE_HIDDEN (__fini_array_end = .);
+
+		*(.jcr)
+		. = ALIGN(4);
+		/* All data end */
+		__data_end__ = .;
+
+	} > RAM
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start__ = .;
+		*(.bss*)
+		*(COMMON)
+		. = ALIGN(4);
+		__bss_end__ = .;
+	} > RAM
+	
+	.heap (COPY):
+	{
+		__end__ = .;
+		end = __end__;
+		*(.heap*)
+		__HeapLimit = .;
+	} > RAM
+
+	/* .stack_dummy section doesn't contains any symbols. It is only
+	 * used for linker to calculate size of stack sections, and assign
+	 * values to stack symbols later */
+	.stack_dummy (COPY):
+	{
+		*(.stack*)
+	} > RAM
+
+	/* Set stack top to end of RAM, and stack limit move down by
+	 * size of stack_dummy section */
+	__StackTop = ORIGIN(RAM) + LENGTH(RAM);
+	__StackLimit = __StackTop - SIZEOF(.stack_dummy);
+	PROVIDE(__stack = __StackTop);
+	
+	/* Check if data + heap + stack exceeds RAM limit */
+	ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+

cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/nrf51_common.ld

+/* Linker script for Nordic Semiconductor nRF51 devices
+ *
+ * Version: Sourcery G++ 4.5-1
+ * Support: https://support.codesourcery.com/GNUToolchain/
+ *
+ * Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions.  No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text*)
+
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+    
+    .ARM.extab : 
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+        
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+        . = ALIGN(4);
+        /* All data end */
+        __data_end__ = .;
+
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+    } > RAM
+    
+    .heap (COPY):
+    {
+        __end__ = .;
+        PROVIDE(end = .);
+        *(.heap*)
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy (COPY):
+    {
+        *(.stack*)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+    
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+

variants/nRF52DK/linker_scripts/gcc/nRF52DK.ld → cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/nrf51_xxaa.ld

@@ -5,8 +5,9 @@ GROUP(-lgcc -lc -lnosys)
 
 MEMORY
 {
-  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000
-  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x8000
+  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x40000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x4000
 }
 
-INCLUDE "nrf5x_common.ld"
+
\ No newline at end of file
+INCLUDE "nrf51_common.ld"

cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/nrf51_xxab.ld

+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x20000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x4000
+}
+
+
+INCLUDE "nrf51_common.ld"

variants/BluzDK/linker_scripts/gcc/BluzDK.ld → cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/nrf51_xxac.ld

@@ -5,8 +5,9 @@ GROUP(-lgcc -lc -lnosys)
 
 MEMORY
 {
-  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x40000
+  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x40000
   RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x8000
 }
 
-INCLUDE "nrf5x_common.ld"
+
+INCLUDE "nrf51_common.ld"

cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/nrf52_common.ld

+/* Linker script for Nordic Semiconductor nRF52 devices
+ *
+ * Version: Sourcery G++ 4.5-1
+ * Support: https://support.codesourcery.com/GNUToolchain/
+ *
+ * Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions.  No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text*)
+
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+    
+    .ARM.extab : 
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+        
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+        . = ALIGN(4);
+        /* All data end */
+        __data_end__ = .;
+
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+    } > RAM
+    
+    .heap (COPY):
+    {
+        __end__ = .;
+        PROVIDE(end = .);
+        *(.heap*)
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy (COPY):
+    {
+        *(.stack*)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+    
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+

cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/nrf52_xxaa.ld

+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x10000
+}
+
+
+INCLUDE "nrf52_common.ld"

platform.txt

@@ -77,7 +77,7 @@ recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU=
 recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
 
 ## Combine gc-sections, archives, and objects
-recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}"  "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-L{nrf.sdk.path}/components/toolchain/gcc/" "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--start-group -lm "{build.path}/{archive_file}" -Wl,--end-group
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}"  "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-L{nrf.sdk.path}/components/toolchain/gcc/" "-T{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--start-group -lm "{build.path}/{archive_file}" -Wl,--end-group
 
 ## Create output (bin file)
 recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"