Skip to content

GitLab

A
arduino-nRF5
Commit 5a400abf authored by Sandeep Mistry's avatar Sandeep Mistry
Browse files
Options

Functional attachInterrupt/deattachInterrupt for change, falling, rising

parent b8aa8a73
Hide whitespace changes
Inline Side-by-side
Showing with 76 additions and 105 deletions
cores/nRF52/WInterrupts.c
View file @ 5a400abf
......@@ -16,36 +16,28 @@
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <nrf_gpiote.h>
#include "Arduino.h"
#include "wiring_private.h"
#include <string.h>
// static voidFuncPtr callbacksInt[EXTERNAL_NUM_INTERRUPTS];
// /* Configure I/O interrupt sources */
// static void __initialize()
// {
// memset(callbacksInt, 0, sizeof(callbacksInt));
// NVIC_DisableIRQ(EIC_IRQn);
// NVIC_ClearPendingIRQ(EIC_IRQn);
// NVIC_SetPriority(EIC_IRQn, 0);
// NVIC_EnableIRQ(EIC_IRQn);
static voidFuncPtr callbacksInt[NUMBER_OF_GPIO_TE];
static int8_t channelMap[NUMBER_OF_GPIO_TE];
static int enabled = 0;
// // Enable GCLK for IEC (External Interrupt Controller)
// GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID(GCM_EIC));
// /* Shall we do that?
// // Do a software reset on EIC
// EIC->CTRL.SWRST.bit = 1 ;
// while ((EIC->CTRL.SWRST.bit == 1) && (EIC->STATUS.SYNCBUSY.bit == 1)) { }
// */
/* Configure I/O interrupt sources */
static void __initialize()
{
memset(callbacksInt, 0, sizeof(callbacksInt));
memset(channelMap, -1, sizeof(channelMap));
// // Enable EIC
// EIC->CTRL.bit.ENABLE = 1;
// while (EIC->STATUS.bit.SYNCBUSY == 1) { }
// }
NVIC_DisableIRQ(GPIOTE_IRQn);
NVIC_ClearPendingIRQ(GPIOTE_IRQn);
NVIC_SetPriority(GPIOTE_IRQn, 1);
NVIC_EnableIRQ(GPIOTE_IRQn);
}
/*
* \brief Specifies a named Interrupt Service Routine (ISR) to call when an interrupt occurs.
......@@ -53,62 +45,42 @@
*/
void attachInterrupt(uint32_t pin, voidFuncPtr callback, uint32_t mode)
{
// static int enabled = 0;
// uint32_t config;
// uint32_t pos;
// EExt_Interrupts in = digitalPinToInterrupt(pin);
// if (in == NOT_AN_INTERRUPT || in == EXTERNAL_INT_NMI)
// return;
// if (!enabled) {
// __initialize();
// enabled = 1;
// }
// // Enable wakeup capability on pin in case being used during sleep
// EIC->WAKEUP.reg |= (1 << in);
// // Assign pin to EIC
// pinPeripheral(pin, PIO_EXTINT);
// // Assign callback to interrupt
// callbacksInt[in] = callback;
// // Look for right CONFIG register to be addressed
// if (in > EXTERNAL_INT_7) {
// config = 1;
// } else {
// config = 0;
// }
// // Configure the interrupt mode
// pos = (in - (8 * config)) << 2;
// switch (mode)
// {
// case LOW:
// EIC->CONFIG[config].reg |= EIC_CONFIG_SENSE0_LOW_Val << pos;
// break;
// case HIGH:
// EIC->CONFIG[config].reg |= EIC_CONFIG_SENSE0_HIGH_Val << pos;
// break;
// case CHANGE:
// EIC->CONFIG[config].reg |= EIC_CONFIG_SENSE0_BOTH_Val << pos;
// break;
// case FALLING:
// EIC->CONFIG[config].reg |= EIC_CONFIG_SENSE0_FALL_Val << pos;
// break;
// case RISING:
// EIC->CONFIG[config].reg |= EIC_CONFIG_SENSE0_RISE_Val << pos;
// break;
// }
// // Enable the interrupt
// EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << in);
if (!enabled) {
__initialize();
enabled = 1;
}
nrf_gpiote_polarity_t polarity;
switch (mode) {
case CHANGE:
polarity = NRF_GPIOTE_POLARITY_TOGGLE;
break;
case FALLING:
polarity = NRF_GPIOTE_POLARITY_HITOLO;
break;
case RISING:
polarity = NRF_GPIOTE_POLARITY_LOTOHI;
break;
default:
return;
}
for (int ch = 0; ch < NUMBER_OF_GPIO_TE; ch++) {
if (channelMap[ch] == -1 || (uint32_t)channelMap[ch] == pin) {
channelMap[ch] = pin;
callbacksInt[ch] = callback;
nrf_gpiote_event_configure(ch, pin, polarity);
nrf_gpiote_event_enable(ch);
nrf_gpiote_int_enable(1 << ch);
break;
}
}
}
/*
......@@ -116,33 +88,32 @@ void attachInterrupt(uint32_t pin, voidFuncPtr callback, uint32_t mode)
*/
void detachInterrupt(uint32_t pin)
{
// EExt_Interrupts in = digitalPinToInterrupt(pin);
// if (in == NOT_AN_INTERRUPT || in == EXTERNAL_INT_NMI)
// return;
for (int ch = 0; ch < NUMBER_OF_GPIO_TE; ch++) {
if ((uint32_t)channelMap[ch] == pin) {
channelMap[ch] = -1;
callbacksInt[ch] = NULL;
// EIC->INTENCLR.reg = EIC_INTENCLR_EXTINT(1 << in);
nrf_gpiote_event_disable(ch);
nrf_gpiote_int_disable(1 << ch);
// // Disable wakeup capability on pin during sleep
// EIC->WAKEUP.reg &= ~(1 << in);
break;
}
}
}
// /*
// * External Interrupt Controller NVIC Interrupt Handler
// */
// void EIC_Handler(void)
// {
// // Test the 16 normal interrupts
// for (uint32_t i=EXTERNAL_INT_0; i<=EXTERNAL_INT_15; i++)
// {
// if ((EIC->INTFLAG.reg & (1 << i)) != 0)
// {
// // Call the callback function if assigned
// if (callbacksInt[i]) {
// callbacksInt[i]();
// }
// // Clear the interrupt
// EIC->INTFLAG.reg = 1 << i;
// }
// }
// }
void GPIOTE_IRQHandler()
{
nrf_gpiote_events_t event = NRF_GPIOTE_EVENTS_IN_0;
for (int ch = 0; ch < NUMBER_OF_GPIO_TE; ch++) {
if (nrf_gpiote_event_is_set(event) && nrf_gpiote_int_is_enabled(1 << ch)) {
if (channelMap[ch] != -1 && callbacksInt[ch]) {
callbacksInt[ch]();
}
nrf_gpiote_event_clear(event);
}
event = (nrf_gpiote_events_t)((uint32_t)event + 4);
}
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment