GitLab

If the interface is already connected, try to enable IPv6 immediately. Otherwise the interface would need to go through disconnect/connect cycle for IPv6 to be enabled.

* Update WiFiProv.ino

* fix(wifiprov): Uses BLE for provisioning

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(rmt): allow legacy driver

* feat(rmt): legacy driver example

* fix(rmt): legacy driver example

* fix(rmt): ESP32_ARDUINO_NEW_RMT_DRV_OFF

* fix(rmt): ESP32_ARDUINO_NEW_RMT_DRV_OFF

* fix(rmt): ESP32_ARDUINO_NEW_RMT_DRV_OFF

* fix(rmt): GPIO HAL only

* fix(rmt): error case

* fix(rmt): not necessary change

* ci(pre-commit): Apply automatic fixes

* ci(pre-commit): Ignore build_opt in clangformat

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* feat(board): Adding ViraLink IoT Gate Boards

* feat(board): Adding ViraLink IoT Gate Boards

* feat(board): Adding ViraLink IoT Gate Boards

* feat(board): Adding ViraLink IoT Gate Boards added spi pins

* feat(board): Adding ViraLink IoT Gate Boards added spi pins

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Fixes IDF builds for H2 and C6 when OpenThread is enabled

Fixes XIAO C6 board name in boards.txt file

* feat(OThread): Add Library

* fix(OpenThread): fixes file list in CMakeLists.txt

* fix(openthread): Fixes JSON CI Files

* fix(openthread): Fixes JSON CI Files

* fix(openthread): Include Openthread guarding

* fix(openthread): COAP parametrization

* fix(openthread): Include Openthread guarding

* fix(openthread): Improves commentaries and code

* fix(openthread): Improves code

* fix(openthread): Includes StreamString.h

* feat(openthread): New Scan Example

* feat(openthread): Improved Scan Example

* feat(openthread): README.md

Initial documentation for ESP3 Arduino OpenThread CLI API.

* feat(openthread): helper functions documentation

Create helper_functions.md for ESP32 Arduino OpenThread API

* fix(openthread): begin end

* feat(openthread): onReceice example

* fix(openthread): tx queue error

* fix(doc): fixing documentation apresentation

Fixes the documentation first paragraph in order to make it easier fore reading. It also displays in the very top which SoC are supported by the library.

* fix(doc): documentation format

* feat(openthread): commentary

* fix(openthread): Typo, start/stop console

* fix(openthread): library properties

* ci(pre-commit): Apply automatic fixes

* feat(openthread): formatting text

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(ppp): Make modem reset delay configurable

The delay required to reset Simcom modem modules varies significantly across
different models, even where they have otherwise identical AT command
sets.

Simcom A7672 was failing to reset with the default 200ms delay. Make the reset
delay configurable to allow customising this for a specific modem.
Default delay, if not specified is kept at 200ms.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Fixes documentation for ESP32 family. Arduino Core 3.0.x has 6 supported SoC and each has a different radio specification.

* feat(net): Deprecate old WiFi APIs

Deprecates WiFiClient, WiFiServer, WiFiUdp and WiFiClientSecure

* fix(net): add defines to WiFi.h

Defines are added to not cause deprecation warnings. Will be removed in the future

* fix(net): Use typedefs instead to help with forward declarations

Defines do not allow forward declarations

* docs(i2s): Fix I2S documentation example

* docs(idf): Fix name of Arduino as component link

* feat(rmt): Solve neopixel issue

if neopixelWrite() is used from different tasks/isr_callbacks, it may result in a concurrency problem and many detach/attach calls in sequence, but not in synch.

This commit avoids initializing the neopixel GPIO again and improves the respomse time of neopixelWrite().

* HTTPClient lib - add HTTPCLIENT_NOSECURE build flag

`HTTPCLIENT_NOSECURE` build flag disables TLS support in HTTPClient library by
excluding `NetworkClientSecure.h` header.
This allows linker to strip down mbedTLS lind and certificates bundle,
which in turn reduces firmware image for about ~80kib.

* Update HTTPClient.cpp

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(example): EXT0 and EXT1 wakeup

Fixes the Deep Sleep wakup example to run with IDF5.1. The API has changed and a adjustment was necessary.

* feat(wakeup): Use Macro for GPIO_NUM

Changed the example to use a #define for the RTC IO Pin (GPIO) used in the example.

* fix(typo): typo and commentaries

Fixes the commentary to the correct IDF terms.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* * feat(esp32): Add variant for Elecrow CrowPanel 7.0

Add variant for Elecrow CrowPanel 7.0"

* * feat(esp32): Add variant for Elecrow CrowPanel 7.0

Add variant for Elecrow CrowPanel 7.0"

* * feat(esp32): Add variant for Elecrow CrowPanel 7.0

Elecrow CrowPanel 7.0" has 4MB flash

* ci(tools): Remove ARM64 runner and use get.exe

* ci(tools): Optimize get.py and verify extraction

* change(tools): Push generated binaries to PR

---------
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

Adds a class for 0x2901 - Characteristic User Descriptor.
This Descriptor is usual in BLE and describes with text what each characteristic is about.
Improve Notify.ino example by adding the 0x2901 descriptor

* fix(netbios): Return interface address for NetBIOS

When NetBIOS returns a match, it should return the IP address of the device.
Presently, however, it returns the address of multicast IP for the subnet
since the incoming NBNS packet's UDP target will be multicast
(i.e. 192.168.1.255).

Iterate over the active network interfaces and check netmasks to determine
where the packet came from, and return the appropriate IP interface address
instead.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>

* fix(BLE): std::map()

* Update libraries/BLE/src/BLERemoteService.cpp

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(wifi): Fix WiFi setTxPower and getTxPower

We need to wait for the interface to be started in order to be able to set/get TX Power. Code was returning too early, so calling the functions after `begin()` resulted in failure.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Similar to setUserAgent

* add(board): Add LILYGO T-ETH-Lite

Adds board support for Lilygo T-ETH Lite

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

It used to come with IDF 4.x

Previously it was allowed only once before begin() was called