GitLab

New range of boards from 4D Systems
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update partition_table.rst

Updating Partition Table Partition with information regarding Variants folder

* Update docs/source/tutorials/partition_table.rst
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* added lilygo t-display (esp32) board

this board is the predecessor to the already included lilygo-t-display-s3

added USB defines for t-display

* implementation of @P-R-O-C-H-Y comments

* added build properties to fix failed compilation

SD lib - AcquireSPI on ff_sd_status

Reimplemented flush in WiFiClient

Allows changing HW CDC Buffer Size after or before begin()

Fixes ESP32 BT Memory Releasing

Removed duplicate MDNS.begin() call in example

Added special handling of the `ARDUINO_BUILD_CORE` macro required only for the core files

* Added the ReadTheDocs configuration file

* File renamed to YAML

In WiFiSTA you can ask for the subnet mask, but not in WiFiAP.
Only the CIDR is reported.
Therefor the missing method is added to have the same features in softAP as well.

The constants that need to be passed to gpio_matrix_in and gpio_matrix_out
to detach an input or output pin from a peripheral vary by platform.  Use
SIG_GPIO_OUT_IDX to detach an output, and GPIO_MATRIX_CONST_ONE_INPUT
and GPIO_MATRIX_CONST_ZERO_INPUT to detach an input.  ESP32 before IDF 4.0
didn't define GPIO_MATRIX_CONST_*_INPUT, so add compatibility #defines
for GPIO_FUNC_IN_LOW/HIGH.  GPIO_FUNC_IN_LOW/HIGH exist in IDF 4.0+, but
can't be used because they have the wrong values for ESP32-C3 at least
in IDF 4.4.3 (https://github.com/espressif/esp-idf/issues/11737).

* fixes example folder

* adds new Serial std::func example

* Olimex ESP32-GATEWAY fixes

Fixes related to board revisions selection.

* Create pins_arduino.h

Example showing how to transmit messages using the TWAI interface and a CAN transceiver.

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

also re-order Adafruit boards a bit

typo

This PR fixes an issue of multiple device callbacks (one callback per device) were not getting registered and invoked.
Consider an example where I create two devices, a switch and a fan; each of them having their own write callbacks. On controlling either switch/fan through Rainmaker app, the callback that got registered at last gets invoked. This is also seen in the issue reported in #8231

* Added printQR function to library

* Upgraded example

* Upgraded README

* Safegueard for qrcode.h include

* Updated Safegueard for qrcode.h include

* Added Nebula s3 Board

* added nebulas3 board

* added variant

* added semicolons

* added pins details

* added secondary sda1 and scl1

* USB_CDC enabled by default

* Changed nebulas3.build.board to NebulaS3

* Changed NebulaS3 to NEBULAS3

* Add MatrixPortal ESP32-S3 (WIP)

* Update bootloader files, etc.

* Add MatrixPortal S3 PSRAM setup to boards.txt

* add dfrobot romeo esp32S3

* add dfrobot romeo esp32s3

* Update pins_arduino.h

* Update pins_arduino.h

* Update pins_arduino.h

* Update pins_arduino.h

* Fixes HWCDC::end()

There is a missing `tx_lock = NULL;`

* Update HWCDC.cpp

Initialize rx_data_buf[] with zeros.

* HardwareSerial: fix begin() lock issue on error path

If the user supplied a wrong UART number, the begin() method would
return without releasing the lock. Add missing unlock call.

* removing unsed Case test

---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>

* Updated preferences.rst

* Added into FAQ info about SPIFFS failed mount