GitLab

* Add IOXESP32 / IOXESP32PS board

* Add ATD1.47-S3 board

---------
Co-authored-by: Max <7087907+maxpromer@users.noreply.github.com>

Corrected analog I/O, BUILTIN_LED and added missing soc/soc_caps.h.

Before neopixelWrite() would end up in / RMT GPIO ERROR / set gpio for RMT driver failed / rmtInit(): RMT failed to initilize. => None working onboard RGB LED.

* M5CoreS3

followup to #8161 #8274 #8276

* Add files via upload

* Fix partition names

* Added support for the Aventen S3 Sync

* Update pins_arduino.h

* Added New LionBit Board Details

Added New LionBit Board Details

* Updated

* Updated

As you suggested

* Updated

Pin

* removed the unwanted lines

* Updated preferences.rst

* Added into FAQ info about SPIFFS failed mount

* Updated troubleshooting

* Moved SPIFFS paragraph from FAQ to troubleshooting

* Minor updates

* Updated troubleshooting

* Updated SD README files and example comments

* Updated troubleshooting with SD issue

* Added note about S3 pins

* Updated SDMMC test setPins calls + added definition for default pins

* Updated SD_MMC comments

* Added pin table to SD_MMC readme

* Updated table in SD_SPI

* Updated based on comments

* Update io_mux.rst

* Update README.md

* new industrial boards namino rosso / namino arancio

* added missing definitions

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Fix analogWrite channel available verification

The last channel allocated is number 0, which conflicted with the value given to an uninitialized pin, giving the "No more analogWrite channels available!" error when trying to use it
Pins are now given the value -1 to indicate that they are not used so channel 0 can be used without errors.

* Fix incorrect array initialization

Keeping array of zeros for `pin_to_channel` and shifting stored channel
values by +1 to keep the pin with channel 0 from being interpreted as unused.

ref: https://github.com/espressif/arduino-esp32/pull/8509#issuecomment-1676103452

Closes #8461
Co-authored-by: Gautier Seidel <gautier@seidel.fr>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Added a partition table for 32MB (4.8/4.8/24)

* Added a 32MB LittleFS scheme, fixed some inconsistencies

Save 180 bytes of ram if UpdateClass instance is not required

* add Adafruit metro S3 16MB Flash, 8MB PSRam

also reorder to have feather boards next to each others

* correct SS pin to 21, also add NEOPIXEL_PIN

* change metro s3 psram type to opi, default SD_CS (SS) to input pull up

* remove psram qspi option

* Added UM NanoS3 board.
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>

* Added UM NanoS3 board.
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>

---------
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update ledc.rst

typo

* Update adc.rst

12 bits (range from 0 to 4095)

* Fixes wrong usedbytes/totalbytes results.

drive id was implemented fixed, does not work with arbitrary initialization.

See https://github.com/espressif/arduino-esp32/issues/3546

* Fixing indention/tabs

* Add MatrixPortal ESP32-S3 (WIP)

* Update bootloader files, etc.

* Add MatrixPortal S3 PSRAM setup to boards.txt

* fix neopixel pin

---------
Co-authored-by: Phillip Burgess <paintyourdragon@dslextreme.com>

New range of boards from 4D Systems
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update partition_table.rst

Updating Partition Table Partition with information regarding Variants folder

* Update docs/source/tutorials/partition_table.rst
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* added lilygo t-display (esp32) board

this board is the predecessor to the already included lilygo-t-display-s3

added USB defines for t-display

* implementation of @P-R-O-C-H-Y comments

* added build properties to fix failed compilation

SD lib - AcquireSPI on ff_sd_status

Reimplemented flush in WiFiClient

Allows changing HW CDC Buffer Size after or before begin()

Fixes ESP32 BT Memory Releasing

Removed duplicate MDNS.begin() call in example