- 02 Sep, 2024 2 commits
-
-
Ludovic BOUÉ authored
Update variant for M5Dial which comes with 8MB of built-in Flash Update variant for M5StampS3 which comes with 8MB of built-in Flash
-
per1234 authored
* fix(boards): Correct PID port property in "Bee Data Logger" board def VID and PID port property values are hexadecimal literals and thus use the standard "0x" prefix. Previously, this prefix was missing from the PID port property association in the definition of the board definition of "Bee Data Logger" board. This typo caused ports having the 0x303a, 0x815C VID/PID pair to not be identified as a "Bee Data Logger" board as intended. * fix(boards): Correct property names for PID port property associations These properties are intended to associate values of the PID port property with "Bee" board definitions. A typo caused them to instead associatiate the values with the VID port property. The result was that ports with this VID/PID pair were not identified by the Arduino development software as the board model as intended.
-
- 31 Aug, 2024 3 commits
-
-
Lucas Saavedra Vaz authored
-
Me No Dev authored
Following deprecation of flush()
-
Lucas Saavedra Vaz authored
-
- 30 Aug, 2024 2 commits
-
-
Me No Dev authored
Modem will try to switch to CMUX and then back to COMMAND in order to allow communication with the modem.
-
Andreas Merkle authored
* fix(littlefs): Use VFSImpl::exists() to avoid false error log * fix(ffat): Use VFSImpl::exists() to avoid false error log --------- Co-authored-by:Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
-
- 28 Aug, 2024 12 commits
-
-
Me No Dev authored
-
Rodrigo Garcia authored
Fixes an issue related to ESP_MATTER component that defines a path using ESP32 as folder. Because Arduino defines ESP32 to 1, it causes an expansion error for folder using ESP32 folder name.
-
Lucas Saavedra Vaz authored
-
Lucas Saavedra Vaz authored
* fix(release): Fix release script to use new archive method * Remove variable
-
Adriano Konzen authored
* Adds the ability to set the clock source for the LEDC * feat(LEDC): Adjusting function names to more suitable * feat(LEDC): Fix clock_source to static * docs(ledc): Document ledc set and get clock source * docs(ledc): Update ledcSetClockSource description * ci(pre-commit): Apply automatic fixes --------- Co-authored-by:
Jan Prochazka <90197375+P-R-O-C-H-Y@users.noreply.github.com> Co-authored-by:
pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
-
Lucas Saavedra Vaz authored
* docs(vale): Enable vale and fix errors * Apply suggestions
-
Lucas Saavedra Vaz authored
* fix(spelling): Fix misspellings detected by codespell and enable it * change(tools): Push generated binaries to PR --------- Co-authored-by:github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
-
Lucas Saavedra Vaz authored
* fix(get.py): Remove existing files before extracting * change(tools): Push generated binaries to PR * ci(pre-commit): Apply automatic fixes * change(tools): Push generated binaries to PR --------- Co-authored-by:
-
Me No Dev authored
This is a compromise for issues caused by https://github.com/espressif/arduino-esp32/pull/9453
-
Juraj Andrássy authored
-
Juraj Andrássy authored
-
Rodrigo Garcia authored
* fix(rgbled): fixes core rgbledWrite() * fix(rgbled): fixes examples - rgbledWrite() * fix(rgbled): fixes variants commetaries - rgbledWrite() * fix(rgbled): examples and doc - use RGB_LED naming * fix(rgbled): variants - use RGB_LED naming * fix(rgbled): other places for RGB LED naming * fix(typo): cores - rgbLed instead of rgbled * fix(typo): examples - rgbLed instead of rgbled * fix(typo): variants commentaties - rgbLed instead of rgbled * fix(rgbled): bad file name * fix(typo): typo and commentaries Co-authored-by:
-
- 26 Aug, 2024 4 commits
-
-
Me No Dev authored
-
Y_hsiao_ch'un authored
* Added variant for ESP32-S3-Zero * Added variant for ESP32-S3-Zero * Fixed CI failures due to I2C and SPI pin definitions * Fixed custom partitions * Fix the partition without ota * Fix waveshare esp32-s3-zero partition table, add 4MB partition content * Fix waveshare esp32-s3-zero partition table, add 4MB partition content * Update tools/partitions/max_app_4MB.csv Co-authored-by:
-
Xylopyrographer authored
* Add ESP32-2432S028R dev board Add support for the ESP32-2432S028R, aka Cheap Yellow Display (CYD) dev board. * Add ESP32-2432S028R variant Add ESP32-2432S028R, aka Cheap Yellow Display (CYD) variant * Revise macro defined function names Append brackets to all macro defined function names * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: -
RichardHeltec authored
* feat(board):Add Heltec Vision Master series boards * fix(board): remove VID/PID from all board definitions * fix(board):change 'heltec_vision_master_xxx.build.board' to uppercase * ci(pre-commit): Apply automatic fixes --------- Co-authored-by:
-
- 22 Aug, 2024 4 commits
-
-
Lucas Saavedra Vaz authored
-
Lucas Saavedra Vaz authored
-
Leandro Mattioli authored
* fix(timer): Typo - milis instead of millis. * fix(doc0: format fix CI error about format --------- Co-authored-by:Rodrigo Garcia <rodrigo.garcia@espressif.com>
-
Ivan Grokhotkov authored
-
- 21 Aug, 2024 3 commits
-
-
Lucas Saavedra Vaz authored
* fix(get.py): Add version checking of installed tools * change(tools): Push generated binaries to PR * Fix for different file formats * change(tools): Push generated binaries to PR * fix paths * change(tools): Push generated binaries to PR * Move to using checksum * change(tools): Push generated binaries to PR * Clean code * change(tools): Push generated binaries to PR * Add checksum check for libs * change(tools): Push generated binaries to PR * ci(pre-commit): Apply automatic fixes * change(tools): Push generated binaries to PR --------- Co-authored-by:
-
Lucas Saavedra Vaz authored
-
Me No Dev authored
-
- 19 Aug, 2024 1 commit
-
-
Davide Perini authored
* fix(esp32): Fixed the hint for the builtin neopixleWrite() function * change(esp32): Added neopixelWriteOrdered() function * change(esp32): Added neopixelWriteOrdered() function * change(esp32): Added neopixelWriteOrdered() function * change(esp32): Added the possibility to specify LED color order * change(esp32): Added the possibility to specify LED color order * feat(rgbled): add license information * feat(rgbled): add color order enum * feat(rgbled): add color order feature * feat(rgbled): change color order for lolin_s3_mini * fix(rgbled): suffix * fix(rgbled): suffix * ci(pre-commit): Apply automatic fixes * fix(rgbled): it lacks GRB case Made GRB default + switch/case exceptions. * fix(rgbled): add guard for rgb_led_color_order_t If RGB_BUILTIN_LED_COLOR_ORDER is not defined, the type rgb_led_color_order_t won't be declared. * fix(rgb-led): Implement rgbLedWriteOrdered() * ci(pre-commit): Apply automatic fixes * Remove const to allow changing the order --------- Co-authored-by:
me-no-dev <hristo@espressif.com>
-
- 16 Aug, 2024 6 commits
-
-
Sylvain Quendez authored
Co-authored-by: -
Sylvain Quendez authored
Co-authored-by: -
Rodrigo Garcia authored
Problem detected with ESP32 and ESP32-S2 when the baudrate goes to 460600 bps. REF_TICK (2MHz) seem not to work properly. Limiting the use of REF_TICK for up to 205 Kbps.
-
microbots authored
* Add CodeCell ESP32C3 variant folder feat(variants): Add CodeCell ESP32C3 variant folder Added the `codecell` folder to the `arduino-esp32/variants` directory to support the CodeCell ESP32C3 board. This folder includes the necessary pin mappings and configuration files. * Update boards.txt for CodeCell ESP32C3 chore(board): Update boards.txt for CodeCell ESP32C3 Updated the boards.txt configuration to include settings specific to the CodeCell ESP32C3 board, such as upload speed and partition schemes. * Update variants/CodeCell/pins_arduino.h Co-authored-by:
-
Lewis He authored
* Added LILYGO T-Watch-S3 & T-Watch-Ultra variants * Remove extra line breaks * Change the maximum upload limit of the rainmaker partition table * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: -
Francis Duvivier authored
* feat(3rd_party_board): Add Fri3d Badge 2024 (ESP32-S3 WROOM 1) Image: https://github.com/Fri3dCamp/badge_2024/blob/main/docs/badge2024.jpg More info on https://github.com/Fri3dCamp/badge_2024 * fix(3rd_party_board): Fix built in led for fri3d badge 2024 and use less X_ variables * ci(pre-commit): Apply automatic fixes --------- Co-authored-by:
-
- 15 Aug, 2024 3 commits
-
-
Jacob Williams authored
* feat(board): Add Alfredo NoU3 Add board support for Alfredo Systems NoU3. https://www.alfredosys.com/products/alfredo-nou3/ * fix(board): added I2C and SS pins to alfredo nou3 * fix(board): set SPI and I2C pin defs to -1 * ci(pre-commit): Apply automatic fixes --------- Co-authored-by:
-
Tinyu authored
* Update M5Stack related board and pin configuration * Remove redundant definitions * Roll back the rainmaker partition table related configuration * delete pid & vid
-
Me No Dev authored
* fix(prov): Use network_provisioning * IDF release/v5.1 5c57dfe949 * fix(prov): Add sketch and CMake fixes * fix(prov): Fix build for ESP32-C2 * ci(pre-commit): Apply automatic fixes * fix(prov): Improve WiFiProv library and QRcode print * IDF release/v5.1 c608177cf9 --------- Co-authored-by:
-
