GitLab

Fix selective compilation to include LittleFS library when checked in menu.

Setting programmer.default has unfortunately multiple effects:
- sets the tick by default in the Tool menu in the IDE (which was the
  expected behavior),
- forces the CLI to use the specified programmer every time an upload is
  attempted (which is confusing users).

For this reason, it is better to remove the "programmer.default" setting
from the board definition and let the user choose the programmer in the
IDE menus, as it was before.

* fix(eth): Fix ETH.end()

* fix(eth): set glue handle to NULL

This PR enables ETH_SPI_SUPPORTS_NO_IRQ to support connection by only 4 wires (SCK, MISO, MOSI and SS) with IRQ and RESET being set as -1

This is to ensure that stack events are called before ours, because callbacks are called in order of attaching

* fix(cdc): Disable SOF interrupt and CDC reset on begin()

* feat(jtag/hwcdc): uses SOF detection from IDF

Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.

Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.

* feat(jtag/hwcdc): uses SOF detection from IDF

Restores back IDF 5.1 SOF detection method in order to fix the HW CDC uploading process.

Enabling SOF mask in the ISR routine causes a problem with esptool uploading when using CDC/JTAG port.

* feat: revert include 

This include is not necessary here.

Moving it back to the HWCDC.cpp file.

* feat: adding a necessary include 

Adding the IDF 5.1 SOF check include file.

Necessary to make it compile. Moved from HWCDC.h file to here.

* feat: move function call to header file

* feat: Moved SOF function

* feat: Removed unused header file

* fix: Use correct SOF header file

* ci(pre-commit): Apply automatic fixes

* Small fixes for Debug prints on C3, C6 and H2

* fix(usb): Fix log prints

---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

and _timeout shadowing fixed

* docs(lib-builder): Add docker image documentation

* docs(lib-builder): Add note about git

* docs(lib-builder): Fix windows command

* Apply suggestions from code review
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Create variant.cpp

Reduced Ethernet clock GPIO signal strength to reduce noise.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: DanKoloff <lubchoh@yahoo.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* IDF release/v5.1 01b912a9e5

* Fix USB OTG Init on new IDF

* Delete libraries/TFLiteMicro/examples/micro_speech directory

Done in order to fix a CI problem created by an entire folder that was removed in original Library Repository.

* IDF release/v5.1 442a798083

* Update esp32-hal-tinyusb.c

---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>

* ci(qemu): Add QEMU emulator to CI

* ci(qemu): Fix windows build

* ci(qemu): Fix skips

* ci(qemu): Skip performance tests

* ci(qemu): Disable QEMU tests for now

* fix(platform): Fix build script recipe number

* NetworkClientSecure made copyable

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* (feat)usbmsc: Add is_writable function

Add is_writable function to the USBMSC class.
Allows USBMSC to be mounted in read-only mode.

* Update USBMSC.ino

Changes to USB Mass Storage (MSC) example code in Arduino USB library

* Added MSC.isWritable(true) line to set the disk as writable

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix: NetworkClient - close the connection in stop() method

for all copies referring it

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

fix: I2C pin are relocated for arduino nano compatability

* Update EEPROM.h - Added new function: bool isDirty()

* Update EEPROM.cpp - Added new function: bool isDirty()

* ci(wokwi): Add wokwi emulator to CI

* feat(wokwi): Support scenario

* feat(wokwi): Add simple CI test for push button

* sudo apt command

* sudo both apt commands

* Add missing test.py file

* Test pytest path changes

* empty push

* move wokwi cli token variable

* move token back to wokwi job

* Update hil.yml

* Update hil.yml

* revert run on pr

* run on PR target

* run only on master

* ci(wokwi): Support wokwi

* ci(wokwi): Skip unsupported and performance test

* ci(wokwi): run wokwi tests without label

* debug: run build on windows

* RUN WIFI WITH PSRAM ON-OFF

* fix psram for S3

* Revert "debug: run build on windows"

This reverts commit bc085e50502eb470836276097fa45ee0e2374ed1.

* ci(wokwi): Run workflow only if build was sucessful

* ci(pre-commit): Apply automatic fixes

* ci(wokwi): Add generated files to gitignore

---------
Co-authored-by: Jan Prochazka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(ci): Run Wokwi tests on PR

* fix(ci): Concurrency change to wokwi

* ci(wokwi): Fix skipped tests

* ci(performance): Add performance tests to CI

* ci(req): Fix requirements

* ci(pre-commit): Apply automatic fixes

* ci(pre-commit): Increase maximum allowed complexity for python

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* feat (hwcdc): ports changes made in 2.0.15

Ports many changes, fixes and improvements made in 2.0.15:
- correct use of timeout
- avoids problems with CDC ISR not reading data
- fixes problems with transmitting many bytes to USB Host
- changes how USB SOF and CDC connection is detected

* feat (HWCDC) : port 2.0.15 

Changed header for a few functions.

* feat (HWCDC): port 2.0.15 upwards

Fixes include file that is not necessary any more.

- SOF is used directly now.

* fix (HWCDC): removes left over

Removes a left over function from previous 3.0.0 code.

- just removing unused code.

* ci(pre-commit): Apply automatic fixes

* fix: typo and commentaries

This fixes a few commentaries.

Just a typo error.

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Changes from Warning to Verbose UART errors/warnings in order to make debugging easier, specially with UART BREAK.