GitLab

* ci(tools): Remove ARM64 runner and use get.exe

* ci(tools): Optimize get.py and verify extraction

* change(tools): Push generated binaries to PR

---------
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

Adds a class for 0x2901 - Characteristic User Descriptor.
This Descriptor is usual in BLE and describes with text what each characteristic is about.
Improve Notify.ino example by adding the 0x2901 descriptor

* fix(netbios): Return interface address for NetBIOS

When NetBIOS returns a match, it should return the IP address of the device.
Presently, however, it returns the address of multicast IP for the subnet
since the incoming NBNS packet's UDP target will be multicast
(i.e. 192.168.1.255).

Iterate over the active network interfaces and check netmasks to determine
where the packet came from, and return the appropriate IP interface address
instead.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>

* fix(BLE): std::map()

* Update libraries/BLE/src/BLERemoteService.cpp

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(wifi): Fix WiFi setTxPower and getTxPower

We need to wait for the interface to be started in order to be able to set/get TX Power. Code was returning too early, so calling the functions after `begin()` resulted in failure.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Similar to setUserAgent

* add(board): Add LILYGO T-ETH-Lite

Adds board support for Lilygo T-ETH Lite

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

It used to come with IDF 4.x

Previously it was allowed only once before begin() was called

* feat: added support for filters in webserver

* feat: add setFilter function in StaticRequestHandler

* fix: ON_STA_FILTER & ON_AP_FILTER

* fix: make request handlers backward compatible

* fix: ON_STA_FILTER & ON_AP_FILTER

* fix: more filters to their own example

* chore: grammar

* fix: remove filters from header file

* fix: use same root route for both interfaces

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(xtal): Add a way to change the XTAL frequency

Add support for boards like SparkFun ESP32 Thing that use 26MHz XTAL

* ci(pre-commit): Apply automatic fixes

* feat(dbg): Print the XTAL frequency in the debug report

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat: added removeRoutes and removeHandler methods

* feat: added removeRoute and removeHandler methods

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

It was returning zero, because it was not able to handle IPv4 mapped address into IPv6 address

* fix(client): Implement readBytes in NetworkClient for faster downloads

* fix(client): Implement readBytes to obey the client timeout

* fix(clieant): use getTimeout() instead

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* ci(tests): Swap cache to artifacts to avoid errors between OSes

* ci(push): Fix chunk generation for compilation

* ci(tests): Fix error code propagation

* ci(push): Add shebang to new script

* ci(push): Fix sizes upload if there is no changes

* ci(bot): Fix GitHub actions bot commit info

* feat(sdmmc): Add RAW disk functions

feat(sdmmc): fixed printf mismatches and missing callback

feat(sdmmc): added ci.json

Removed excess log_i

* ci(pre-commit): Apply automatic fixes

* Fixed sdmmc host check to pass CI

* feat(sdmmc): fixed example USB check

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

Fixes analogContinuousSetWidth() border test.

* change(idf): Rename component example

* ci(push): Fix steps conditions

* ci(tests): Remove unnecessary concurrency

* ci(push): Fix step condition

* fix(idf): Fix compilation warnings when as component

* ci(fix): Fix new workflows

* ci(pre-commit): Properly cache python modules

* fix(get.py): Verify files after extraction and make it more readable

* ci(idf): Compile as component when libs change

* ci(wokwi): Re-enable cache for wokwi tests

* ci(tests): Run scripts only from master

* Revert "fix(get.py): Verify files after extraction and make it more readable"

This reverts commit cc40edb40766ea8a013c0d76326bc57314418bff.

* ci(compilation): Fix changed files check

* ci(wokwi): Disable tests that use scenarios

* Added new UM FeatherS3 Neo board.

* ci(pre-commit): Apply automatic fixes

---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* ci(refactor): Refactor workflows and skip files

* ci(refactor): Refactor workflows and skip files

* ci(refactor): Improvements and compilation of only related files

* ci(refactor): Delete duplicated steps

* ci(refactor): General improvements

* ci(refactor): Delete duplicated lines

* ci(refactor): Rename jobs

fix: Changed Board name

Helps to overcome the limit of windows path, when the usernames are long.