GitLab

* new industrial boards namino rosso / namino arancio

* added missing definitions

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Fix analogWrite channel available verification

The last channel allocated is number 0, which conflicted with the value given to an uninitialized pin, giving the "No more analogWrite channels available!" error when trying to use it
Pins are now given the value -1 to indicate that they are not used so channel 0 can be used without errors.

* Fix incorrect array initialization

Keeping array of zeros for `pin_to_channel` and shifting stored channel
values by +1 to keep the pin with channel 0 from being interpreted as unused.

ref: https://github.com/espressif/arduino-esp32/pull/8509#issuecomment-1676103452

Closes #8461
Co-authored-by: Gautier Seidel <gautier@seidel.fr>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Added a partition table for 32MB (4.8/4.8/24)

* Added a 32MB LittleFS scheme, fixed some inconsistencies

Save 180 bytes of ram if UpdateClass instance is not required

* add Adafruit metro S3 16MB Flash, 8MB PSRam

also reorder to have feather boards next to each others

* correct SS pin to 21, also add NEOPIXEL_PIN

* change metro s3 psram type to opi, default SD_CS (SS) to input pull up

* remove psram qspi option

* Added UM NanoS3 board.
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>

* Added UM NanoS3 board.
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>

---------
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update ledc.rst

typo

* Update adc.rst

12 bits (range from 0 to 4095)

* Fixes wrong usedbytes/totalbytes results.

drive id was implemented fixed, does not work with arbitrary initialization.

See https://github.com/espressif/arduino-esp32/issues/3546

* Fixing indention/tabs

* Add MatrixPortal ESP32-S3 (WIP)

* Update bootloader files, etc.

* Add MatrixPortal S3 PSRAM setup to boards.txt

* fix neopixel pin

---------
Co-authored-by: Phillip Burgess <paintyourdragon@dslextreme.com>

New range of boards from 4D Systems
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* Update partition_table.rst

Updating Partition Table Partition with information regarding Variants folder

* Update docs/source/tutorials/partition_table.rst
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* added lilygo t-display (esp32) board

this board is the predecessor to the already included lilygo-t-display-s3

added USB defines for t-display

* implementation of @P-R-O-C-H-Y comments

* added build properties to fix failed compilation

SD lib - AcquireSPI on ff_sd_status

Reimplemented flush in WiFiClient

Allows changing HW CDC Buffer Size after or before begin()

Fixes ESP32 BT Memory Releasing

Removed duplicate MDNS.begin() call in example

Added special handling of the `ARDUINO_BUILD_CORE` macro required only for the core files

* Added the ReadTheDocs configuration file

* File renamed to YAML

In WiFiSTA you can ask for the subnet mask, but not in WiFiAP.
Only the CIDR is reported.
Therefor the missing method is added to have the same features in softAP as well.

The constants that need to be passed to gpio_matrix_in and gpio_matrix_out
to detach an input or output pin from a peripheral vary by platform.  Use
SIG_GPIO_OUT_IDX to detach an output, and GPIO_MATRIX_CONST_ONE_INPUT
and GPIO_MATRIX_CONST_ZERO_INPUT to detach an input.  ESP32 before IDF 4.0
didn't define GPIO_MATRIX_CONST_*_INPUT, so add compatibility #defines
for GPIO_FUNC_IN_LOW/HIGH.  GPIO_FUNC_IN_LOW/HIGH exist in IDF 4.0+, but
can't be used because they have the wrong values for ESP32-C3 at least
in IDF 4.4.3 (https://github.com/espressif/esp-idf/issues/11737).

* fixes example folder

* adds new Serial std::func example

* Olimex ESP32-GATEWAY fixes

Fixes related to board revisions selection.

* Create pins_arduino.h

Example showing how to transmit messages using the TWAI interface and a CAN transceiver.

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

also re-order Adafruit boards a bit