Skip to content

GitLab

A
arduino-esp32
Unverified Commit d75795f5 authored by powerfeatherdev's avatar powerfeatherdev Committed by GitHub
Browse files
Options

ESP32-S3 PowerFeather Support for v2.x (#9325) 

* Add support for ESP32-S3 PowerFeather

* Replace GPIO_NUM_X with just the pin number

* Pattern powerfeather entries after generic s3 board

* Remove redefinitions, add pin aliases to pins_arduino.h

* Fix and add pin definitions

Add pins D7, D8
Correct pin numbers for ALARM and EN

* Enable CDC on boot

* Use partition schemes appropriate for flash size

Also adds another partition scheme based of off default_8MB, but fat
partition.

* Add some required definitions to pins_arduino.h
parent 622ddc55
Hide whitespace changes
Inline Side-by-side
Showing with 253 additions and 0 deletions
boards.txt
View file @ d75795f5
...@@ -26852,3 +26852,176 @@ motorgo_mini_1.menu.EraseFlash.all=Enabled ...@@ -26852,3 +26852,176 @@ motorgo_mini_1.menu.EraseFlash.all=Enabled
motorgo_mini_1.menu.EraseFlash.all.upload.erase_cmd=-e motorgo_mini_1.menu.EraseFlash.all.upload.erase_cmd=-e
############################################################## ##############################################################
# ESP32-S3 PowerFeather
esp32s3_powerfeather.name=ESP32-S3 PowerFeather
esp32s3_powerfeather.vid.0=0x303a
esp32s3_powerfeather.pid.0=0x81BB
esp32s3_powerfeather.bootloader.tool=esptool_py
esp32s3_powerfeather.bootloader.tool.default=esptool_py
esp32s3_powerfeather.upload.tool=esptool_py
esp32s3_powerfeather.upload.tool.default=esptool_py
esp32s3_powerfeather.upload.tool.network=esp_ota
esp32s3_powerfeather.upload.maximum_size=1310720
esp32s3_powerfeather.upload.maximum_data_size=327680
esp32s3_powerfeather.upload.flags=
esp32s3_powerfeather.upload.extra_flags=
esp32s3_powerfeather.upload.use_1200bps_touch=false
esp32s3_powerfeather.upload.wait_for_upload_port=false
esp32s3_powerfeather.serial.disableDTR=false
esp32s3_powerfeather.serial.disableRTS=false
esp32s3_powerfeather.build.tarch=xtensa
esp32s3_powerfeather.build.bootloader_addr=0x0
esp32s3_powerfeather.build.target=esp32s3
esp32s3_powerfeather.build.mcu=esp32s3
esp32s3_powerfeather.build.core=esp32
esp32s3_powerfeather.build.variant=esp32s3_powerfeather
esp32s3_powerfeather.build.board=ESP32S3_POWERFEATHER
esp32s3_powerfeather.build.usb_mode=1
esp32s3_powerfeather.build.cdc_on_boot=1
esp32s3_powerfeather.build.msc_on_boot=0
esp32s3_powerfeather.build.dfu_on_boot=0
esp32s3_powerfeather.build.f_cpu=240000000L
esp32s3_powerfeather.build.flash_size=8MB
esp32s3_powerfeather.build.flash_freq=80m
esp32s3_powerfeather.build.flash_mode=dio
esp32s3_powerfeather.build.boot=qio
esp32s3_powerfeather.build.boot_freq=80m
esp32s3_powerfeather.build.partitions=default_8MB
esp32s3_powerfeather.build.defines=
esp32s3_powerfeather.build.loop_core=
esp32s3_powerfeather.build.event_core=
esp32s3_powerfeather.build.flash_type=qio
esp32s3_powerfeather.build.psram_type=qspi
esp32s3_powerfeather.build.memory_type={build.flash_type}_{build.psram_type}
esp32s3_powerfeather.menu.PSRAM.disabled=Disabled
esp32s3_powerfeather.menu.PSRAM.disabled.build.defines=
esp32s3_powerfeather.menu.PSRAM.disabled.build.psram_type=qspi
esp32s3_powerfeather.menu.PSRAM.enabled=QSPI PSRAM
esp32s3_powerfeather.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
esp32s3_powerfeather.menu.PSRAM.enabled.build.psram_type=qspi
esp32s3_powerfeather.menu.FlashMode.qio=QIO 80MHz
esp32s3_powerfeather.menu.FlashMode.qio.build.flash_mode=dio
esp32s3_powerfeather.menu.FlashMode.qio.build.boot=qio
esp32s3_powerfeather.menu.FlashMode.qio.build.boot_freq=80m
esp32s3_powerfeather.menu.FlashMode.qio.build.flash_freq=80m
esp32s3_powerfeather.menu.FlashMode.qio120=QIO 120MHz
esp32s3_powerfeather.menu.FlashMode.qio120.build.flash_mode=dio
esp32s3_powerfeather.menu.FlashMode.qio120.build.boot=qio
esp32s3_powerfeather.menu.FlashMode.qio120.build.boot_freq=120m
esp32s3_powerfeather.menu.FlashMode.qio120.build.flash_freq=80m
esp32s3_powerfeather.menu.FlashMode.dio=DIO 80MHz
esp32s3_powerfeather.menu.FlashMode.dio.build.flash_mode=dio
esp32s3_powerfeather.menu.FlashMode.dio.build.boot=dio
esp32s3_powerfeather.menu.FlashMode.dio.build.boot_freq=80m
esp32s3_powerfeather.menu.FlashMode.dio.build.flash_freq=80m
esp32s3_powerfeather.menu.LoopCore.1=Core 1
esp32s3_powerfeather.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
esp32s3_powerfeather.menu.LoopCore.0=Core 0
esp32s3_powerfeather.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
esp32s3_powerfeather.menu.EventsCore.1=Core 1
esp32s3_powerfeather.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
esp32s3_powerfeather.menu.EventsCore.0=Core 0
esp32s3_powerfeather.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
esp32s3_powerfeather.menu.USBMode.hwcdc=Hardware CDC and JTAG
esp32s3_powerfeather.menu.USBMode.hwcdc.build.usb_mode=1
esp32s3_powerfeather.menu.USBMode.default=USB-OTG (TinyUSB)
esp32s3_powerfeather.menu.USBMode.default.build.usb_mode=0
esp32s3_powerfeather.menu.CDCOnBoot.cdc=Enabled
esp32s3_powerfeather.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
esp32s3_powerfeather.menu.CDCOnBoot.default=Disabled
esp32s3_powerfeather.menu.CDCOnBoot.default.build.cdc_on_boot=0
esp32s3_powerfeather.menu.MSCOnBoot.default=Disabled
esp32s3_powerfeather.menu.MSCOnBoot.default.build.msc_on_boot=0
esp32s3_powerfeather.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
esp32s3_powerfeather.menu.MSCOnBoot.msc.build.msc_on_boot=1
esp32s3_powerfeather.menu.DFUOnBoot.default=Disabled
esp32s3_powerfeather.menu.DFUOnBoot.default.build.dfu_on_boot=0
esp32s3_powerfeather.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
esp32s3_powerfeather.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
esp32s3_powerfeather.menu.UploadMode.default=UART0 / Hardware CDC
esp32s3_powerfeather.menu.UploadMode.default.upload.use_1200bps_touch=false
esp32s3_powerfeather.menu.UploadMode.default.upload.wait_for_upload_port=false
esp32s3_powerfeather.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
esp32s3_powerfeather.menu.UploadMode.cdc.upload.use_1200bps_touch=true
esp32s3_powerfeather.menu.UploadMode.cdc.upload.wait_for_upload_port=true
esp32s3_powerfeather.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
esp32s3_powerfeather.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
esp32s3_powerfeather.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
esp32s3_powerfeather.menu.PartitionScheme.default_ffat_8MB=8M with ffat (3MB APP/1.5MB FATFS)
esp32s3_powerfeather.menu.PartitionScheme.default_ffat_8MB.build.partitions=default_ffat_8MB
esp32s3_powerfeather.menu.PartitionScheme.default_ffat_8MB.upload.maximum_size=3342336
esp32s3_powerfeather.menu.PartitionScheme.large_spiffs_8MB=Large SPIFFS (1.2MB APP/5.3MB SPIFFS)
esp32s3_powerfeather.menu.PartitionScheme.large_spiffs_8MB.build.partitions=large_spiffs_8MB
esp32s3_powerfeather.menu.PartitionScheme.large_spiffs_8MB.upload.maximum_size=1310720
esp32s3_powerfeather.menu.PartitionScheme.large_ffat_8MB=Large FFAT (1.2MB APP/5.3MB FATFS)
esp32s3_powerfeather.menu.PartitionScheme.large_ffat_8MB.build.partitions=large_ffat_8MB
esp32s3_powerfeather.menu.PartitionScheme.large_ffat_8MB.upload.maximum_size=1310720
esp32s3_powerfeather.menu.PartitionScheme.max_app_8MB=Maximum APP (7.9MB APP No OTA/No FS)
esp32s3_powerfeather.menu.PartitionScheme.max_app_8MB.build.partitions=max_app_8MB
esp32s3_powerfeather.menu.PartitionScheme.max_app_8MB.upload.maximum_size=8257536
esp32s3_powerfeather.menu.CPUFreq.240=240MHz (WiFi)
esp32s3_powerfeather.menu.CPUFreq.240.build.f_cpu=240000000L
esp32s3_powerfeather.menu.CPUFreq.160=160MHz (WiFi)
esp32s3_powerfeather.menu.CPUFreq.160.build.f_cpu=160000000L
esp32s3_powerfeather.menu.CPUFreq.80=80MHz (WiFi)
esp32s3_powerfeather.menu.CPUFreq.80.build.f_cpu=80000000L
esp32s3_powerfeather.menu.CPUFreq.40=40MHz
esp32s3_powerfeather.menu.CPUFreq.40.build.f_cpu=40000000L
esp32s3_powerfeather.menu.CPUFreq.20=20MHz
esp32s3_powerfeather.menu.CPUFreq.20.build.f_cpu=20000000L
esp32s3_powerfeather.menu.CPUFreq.10=10MHz
esp32s3_powerfeather.menu.CPUFreq.10.build.f_cpu=10000000L
esp32s3_powerfeather.menu.UploadSpeed.921600=921600
esp32s3_powerfeather.menu.UploadSpeed.921600.upload.speed=921600
esp32s3_powerfeather.menu.UploadSpeed.115200=115200
esp32s3_powerfeather.menu.UploadSpeed.115200.upload.speed=115200
esp32s3_powerfeather.menu.UploadSpeed.256000.windows=256000
esp32s3_powerfeather.menu.UploadSpeed.256000.upload.speed=256000
esp32s3_powerfeather.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32s3_powerfeather.menu.UploadSpeed.230400=230400
esp32s3_powerfeather.menu.UploadSpeed.230400.upload.speed=230400
esp32s3_powerfeather.menu.UploadSpeed.460800.linux=460800
esp32s3_powerfeather.menu.UploadSpeed.460800.macosx=460800
esp32s3_powerfeather.menu.UploadSpeed.460800.upload.speed=460800
esp32s3_powerfeather.menu.UploadSpeed.512000.windows=512000
esp32s3_powerfeather.menu.UploadSpeed.512000.upload.speed=512000
esp32s3_powerfeather.menu.DebugLevel.none=None
esp32s3_powerfeather.menu.DebugLevel.none.build.code_debug=0
esp32s3_powerfeather.menu.DebugLevel.error=Error
esp32s3_powerfeather.menu.DebugLevel.error.build.code_debug=1
esp32s3_powerfeather.menu.DebugLevel.warn=Warn
esp32s3_powerfeather.menu.DebugLevel.warn.build.code_debug=2
esp32s3_powerfeather.menu.DebugLevel.info=Info
esp32s3_powerfeather.menu.DebugLevel.info.build.code_debug=3
esp32s3_powerfeather.menu.DebugLevel.debug=Debug
esp32s3_powerfeather.menu.DebugLevel.debug.build.code_debug=4
esp32s3_powerfeather.menu.DebugLevel.verbose=Verbose
esp32s3_powerfeather.menu.DebugLevel.verbose.build.code_debug=5
esp32s3_powerfeather.menu.EraseFlash.none=Disabled
esp32s3_powerfeather.menu.EraseFlash.none.upload.erase_cmd=
esp32s3_powerfeather.menu.EraseFlash.all=Enabled
esp32s3_powerfeather.menu.EraseFlash.all.upload.erase_cmd=-e
##############################################################
\ No newline at end of file
tools/partitions/default_ffat_8MB.csv 0 → 100644
View file @ d75795f5
# Name, Type, SubType, Offset, Size, Flags
nvs, data, nvs, 0x9000, 0x5000,
otadata, data, ota, 0xe000, 0x2000,
app0, app, ota_0, 0x10000, 0x330000,
app1, app, ota_1, 0x340000,0x330000,
ffat, data, fat, 0x670000,0x180000,
coredump, data, coredump,0x7F0000,0x10000,
tools/partitions/large_ffat_8MB.csv 0 → 100644
View file @ d75795f5
# Name, Type, SubType, Offset, Size, Flags
nvs, data, nvs, 0x9000, 0x5000,
otadata, data, ota, 0xe000, 0x2000,
app0, app, ota_0, 0x10000, 0x140000,
app1, app, ota_1, 0x150000,0x140000,
ffat, data, fat, 0x290000,0x560000,
coredump, data, coredump,0x7F0000,0x10000,
tools/partitions/large_spiffs_8MB.csv 0 → 100644
View file @ d75795f5
# Name, Type, SubType, Offset, Size, Flags
nvs, data, nvs, 0x9000, 0x5000,
otadata, data, ota, 0xe000, 0x2000,
app0, app, ota_0, 0x10000, 0x140000,
app1, app, ota_1, 0x150000,0x140000,
spiffs, data, spiffs, 0x290000,0x560000,
coredump, data, coredump,0x7F0000,0x10000,
variants/esp32s3_powerfeather/pins_arduino.h 0 → 100644
View file @ d75795f5
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303A
#define USB_PID 0x81BB
#define USB_MANUFACTURER "PowerFeather"
#define USB_PRODUCT "ESP32-S3 PowerFeather"
#define USB_SERIAL ""
#define NUM_DIGITAL_PINS 48
#define EXTERNAL_NUM_INTERRUPTS NUM_DIGITAL_PINS
#define NUM_ANALOG_INPUTS 20
#define analogInputToDigitalPin(p) (((p)<NUM_ANALOG_INPUTS)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<=NUM_DIGITAL_PINS)?(p):-1)
#define digitalPinHasPWM(p) (p<=NUM_DIGITAL_PINS)
static const uint8_t ALARM = 21;
static const uint8_t INT = 5;
static const uint8_t LED = 46;
static const uint8_t BTN = 0;
static const uint8_t EN = 7;
static const uint8_t TX = 44;
static const uint8_t RX = 42;
static const uint8_t TX0 = 43;
static const uint8_t SS = -1;
static const uint8_t MISO = 41;
static const uint8_t MOSI = 40;
static const uint8_t SCK = 39;
static const uint8_t SCL = 36;
static const uint8_t SDA = 35;
static const uint8_t A0 = 10;
static const uint8_t A1 = 9;
static const uint8_t A2 = 8;
static const uint8_t A3 = 3;
static const uint8_t A4 = 2;
static const uint8_t A5 = 1;
static const uint8_t D5 = 15;
static const uint8_t D6 = 16;
static const uint8_t D7 = 37;
static const uint8_t D8 = 6;
static const uint8_t D9 = 17;
static const uint8_t D10 = 18;
static const uint8_t D11 = 45;
static const uint8_t D12 = 12;
static const uint8_t D13 = 11;
#define LED_BUILTIN 46
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#endif /* Pins_Arduino_h */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment