add boards WiFiduinoV2&WiFiduino32S3 (#7247)

add boards WiFiduinoV2&WiFiduino32S3

variants/wifiduino32s3/pins_arduino.h

+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       20
+
+// Some boards have too low voltage on this pin (board design bug)
+// Use different pin with 3V and connect with 48
+// and change this setup for the chosen pin (for example 38)
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+48;
+#define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
+#define BOARD_HAS_NEOPIXEL
+#define LED_BRIGHTNESS 64
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+static const uint8_t TX = 45;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 4;
+static const uint8_t SCL = 5;
+
+static const uint8_t SS    = 46;
+static const uint8_t MOSI  = 3;
+static const uint8_t MISO  = 20;
+static const uint8_t SCK   = 19;
+
+static const uint8_t A0 = 7;
+static const uint8_t A1 = 6;
+static const uint8_t A2 = 2;
+static const uint8_t A3 = 1;
+static const uint8_t A4 = 4;
+static const uint8_t A5 = 5;
+
+static const uint8_t D0 = 44;
+static const uint8_t D1 = 45;
+static const uint8_t D2 = 42;
+static const uint8_t D3 = 41;
+static const uint8_t D4 = 0;
+static const uint8_t D5 = 45;
+static const uint8_t D6 = 48;
+static const uint8_t D7 = 47;
+static const uint8_t D8 = 21;
+static const uint8_t D9 = 14;
+static const uint8_t D10 = 46;
+static const uint8_t D11 = 3;
+static const uint8_t D12 = 20;
+static const uint8_t D13 = 19;
+
+#endif /* Pins_Arduino_h */

variants/wifiduinov2/pins_arduino.h

+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define EXTERNAL_NUM_INTERRUPTS 22
+#define NUM_DIGITAL_PINS        22
+#define NUM_ANALOG_INPUTS       6
+
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+13;
+#define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
+#define BOARD_HAS_NEOPIXEL
+#define LED_BRIGHTNESS 64
+
+#define analogInputToDigitalPin(p)  (((p)<NUM_ANALOG_INPUTS)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<NUM_DIGITAL_PINS)?(p):-1)
+#define digitalPinHasPWM(p)         (p < EXTERNAL_NUM_INTERRUPTS)
+
+static const uint8_t TX = 21;
+static const uint8_t RX = 20;
+
+static const uint8_t SDA = 4;
+static const uint8_t SCL = 5;
+
+static const uint8_t SS    = 7;
+static const uint8_t MOSI  = 3;
+static const uint8_t MISO  = 10;
+static const uint8_t SCK   = 2;
+
+static const uint8_t A0 = 0;
+static const uint8_t A1 = 1;
+static const uint8_t A2 = 2;
+static const uint8_t A3 = 3;
+static const uint8_t A4 = 4;
+static const uint8_t A5 = 5;
+
+static const uint8_t D0 = 20;
+static const uint8_t D1 = 21;
+static const uint8_t D2 = 9;
+static const uint8_t D3 = 13;
+static const uint8_t D4 = 12;
+static const uint8_t D5 = 11;
+static const uint8_t D6 = 6;
+static const uint8_t D7 = 18;
+static const uint8_t D8 = 19;
+static const uint8_t D9 = 8;
+static const uint8_t D10 = 7;
+static const uint8_t D11 = 3;
+static const uint8_t D12 = 10;
+static const uint8_t D13 = 2;
+
+#endif /* Pins_Arduino_h */