GitLab

Update RP2040 18bit PIO SPI code for 18 bit SPI displays (tested on  ILI9488)
Add ILI9342_DRIVER option for default landscape display.

Correct missing RM68120_DRIVER

A simple typo was the problem!

Sprite class uses TFT_eSPI setBitmapColor - fn deleted
Small performance improvement to RP2040 SPI PIO
Typo corrections
Correct (unused) tft_Write_32 for STM32
Update HX8357D rotation code
Enable software reset for ILI9486
Add preliminary RM68120 support

SW reset needed for RPi display

In setup add the following lines:
// If green and blue swapped on display then change the RGB colour order
// Only uncomment ONE of the following options
#define TFT_RGB_ORDER TFT_RGB    //   Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR    //   Blue-Green-RED

Add ST7789 172x320 display support

Allow generic driver to use a custom SPI port

I have a SeeedStudio Wio Terminal.
I'm using this lib in VS Code with PlatformIO but the lib
don't use the `SPICOM` variable when it's a generic device.

Steps to reproduce (using a Wio Terminal):
* Create a project using PlatformIO
* Add the TFT_eSPI lib to the project
* Add in the build flags these lines
```
build_flags = 
	-DUSER_SETUP_LOADED=1
	-DILI9341_DRIVER=1
	-DHASSPI=1
	-DSPICOM=LCD_SPI
	-DTFT_CS=LCD_SS_PIN
	-DTFT_DC=LCD_DC
	-DTFT_RST=LCD_RESET
	-DTFT_BL=LCD_BACKLIGHT
	-DTFT_BACKLIGHT_ON=HIGH
	-DTFT_BACKLINGT_V=2000
```
* Compile and transfer to the device
=> only backlight works

add ST7789 240X280 1.69inch TFT Setup file

Renumbered to Setup203