GitLab

On ESP8266 when using overlap, only one SPI device can share the FLASH SPI bus .

In setup add:
#define FONT_4_GBP
To replace $ with £ in font 4

Auto set of CGRAM offset for 135 x 240 ST7789 display

Correct sprite rendering
GC9A01 expects exact number of pixels to fill setWindow area.

tft_Write_16N was missing.

Setup for the ESP32 S2 with Adafruit ST7789 display

Declare header files for PlatformIO

ESP32 S2 edits caused a problem

Tested with ESP32 board package 2.0.1

Additional boards manager URL may need to be updated to load the latest ESP32 board package!

Fix HX8375D rotation values

RPi display requires 16 bit commands and slower DC and CS strobe timings.

memcpy should be memmove since areas overlap.

the ILI9486 driver work well with this

Create Setup52_LilyPi_ST7796.h

Setup file example is for original M5Stack Basic Core module.

This include can now be used with either the latest versions of Arduino official or Earle Philhower's board package.

See #1188

Support debugged for ILI9488 TFT with RP2040 processors.
Minor improvements to ESP32 code.

Use:
  #define ILI9341_2_DRIVER
in the setup file to invoke new initicode, instead of:
  #define ILI9341_DRIVER

Add support for SSD1351! (128*128 OLED)