To minimise effort to resolve issues the following should be provided as a minimum:
1. Procesor, e.g RP2040, ESP32 S3 etc
2. TFT_eSPI library version (try the latest, the problem may have been resolved!)
3. IDE (e.g. Arduino or PlatformIO)
4. Board package version (e.g. 2.0.3)
5. TFT driver (e.g. ILI9341), a link to the vendors product web page is useful too.
1. A description of the problem and the conditions that cause it to occur
2. IDE (e.g. Arduino or PlatformIO)
3. TFT_eSPI library version (try the latest, the problem may have been resolved!) from the Manage Libraries... menu
4. Board package version (e.g. 2.0.3) available from the Boards Manager... menu
5. Procesor, e.g RP2040, ESP32 S3 etc
6. TFT driver (e.g. ILI9341), a link to the vendors product web page is useful too.
7. Interface type (SPI or parallel)
Plus further information as appropriate to the problem:
6. TFT to processor connections used
7. A zip file containing your setup file (just drag and drop in message window - do not paste in long files!)
8. A zip file containing a simple and complete example sketch that demonstrates the problem but needs no special hardware sensors or libraries.
9. A description of the problem and the conditions that cause it to occur
10. Screen shot pictures showing the problem (just drag and drop in message window)
8. TFT to processor connections used
9. A zip file containing your setup file (just drag and drop in message window - do not paste in long files!)
10. A zip file containing a simple and complete example sketch that demonstrates the problem but needs no special hardware sensors or libraries.
11. Screen shot pictures showing the problem (just drag and drop in message window)
The idea is to provide sufficient information so I can setup the exact same scenario to investigate and resolve the issue.
The idea is to provide sufficient information so I can setup the exact same (or sufficiently similar) scenario to investigate and resolve the issue.
Put three ticks ( ` chracter on key next to "1") at the start and end of short pasted code segments to avoid format/markup anolmolies and to use a monspaced font. Example:
Put three ticks ( ` character on key next to "1" key) at the start and end of short pasted code segments to avoid format/markup anomolies and to use a monspaced font. Example:
